Correct Method for Starting an Automatic Transmission New Energy Vehicle

1 Answers
DiEsther
07/25/25 4:13am
Turn the ignition key to the second position, the power-on position, allowing the vehicle's computer system to begin self-checking for at least 6 seconds or more. Press the foot brake and shift the gear from P (Park) to N (Neutral) (if reversing, start the engine directly in P). Release the foot brake and turn the ignition key to the start position to ignite the engine. Press the foot brake, release the handbrake, and shift the gear from N (Neutral) to D (Drive). Slowly release the foot brake to start moving, then smoothly press the accelerator pedal according to road conditions for safe driving.
Was this review help?
17
2
Share
More Forum Discussions

What is the tire size of the Luxgen U6?

The Luxgen U6 is equipped with Bridgestone 215/55-R17 tires. Here is some information about the Luxgen U6: 1. In the Taiwanese market, the Luxgen U6 is referred to as the LUXGEN-U6-TURBO. This model is positioned as a compact SUV, and its exterior design draws inspiration from the design concept of the Luxgen 7 SUV. 2. The U6's design and driving experience are similar to that of a sedan. The high center console and its wraparound cockpit design provide a strong sense of sportiness. Additionally, the minor facelift incorporates extensive use of leather, enhancing the premium feel compared to previous models.
2
5
Share

Why is there no sound from the turn signal?

Turn signal has no sound due to poor contact or buzzer damage, and needs to be inspected at an auto repair shop. The turn signal is an important indicator light that turns on when the vehicle is turning to alert surrounding vehicles and pedestrians. The turn signal tube uses a xenon tube, with a microcontroller-controlled circuit that alternates left and right flashes continuously. The turn signal uses a flasher to achieve the blinking effect, mainly divided into three types: resistance wire type, capacitor type, and electronic type. The turn signal is the most important device indicating a car's dynamic information, installed at the front and rear of the vehicle body. It turns on when the car is turning, providing safety for driving. Please use the turn signal as required.
19
2
Share

Where is the battery located in the Mercedes-Benz GLC?

The location of the battery in the Mercedes-Benz GLC: It is under the floor of the vehicle's trunk. Simply open the trunk floor to see it. Taking the Mercedes-Benz GLC 2021 260L 4MATIC Dynamic model as an example, its body dimensions are 4764mm in length, 1898mm in width, and 1642mm in height, with a wheelbase of 2973mm. The vehicle features multi-link independent suspension both in the front and rear. It is equipped with a 2.0T inline four-cylinder turbocharged engine, with a maximum power of 145kW and a maximum torque of 320Nm, paired with a 9-speed automatic manual transmission.
5
3
Share

Where is the high-pressure AC joint of the Mercedes-Benz R300 located?

The high-pressure AC joint of the Mercedes-Benz R300 is located at the upper right of the condenser. You can refer to the vehicle's user manual for details. Below is relevant information about the Mercedes-Benz R300: 1. Body dimensions: This vehicle is positioned as a large station wagon, with a length, width, and height of 5157mm, 1922mm, and 1665mm respectively, and a wheelbase of 3215mm. 2. Powertrain: Equipped with a 3.0L V6 engine, delivering a maximum power of 170kw, with a theoretical fuel consumption of 10.9L/100km. It comes with a 7G-TRONIC automatic transmission and features four-wheel drive.
17
1
Share

What are the differences between Aston Martin DBS and DB11?

The differences between Aston Martin DBS and DB11: 1. Different maximum power: The maximum power of Aston Martin DBS is 533kw; The maximum power of Aston Martin DB11 is 375kw. 2. Different maximum torque: The maximum torque of Aston Martin DBS is 900nm; The maximum torque of Aston Martin DB11 is 675nm. What Aston Martin DBS and DB11 have in common is that the body structure is a 2-door 4-seater hardtop sports car, the wheelbase is 2805mm, the driving method is front-engine rear-wheel drive, the power steering type is electric power steering, and the body structure is a load-bearing type.
8
5
Share

What does the i-stop green light mean?

i-stop green light indicates that the auto start-stop is in the active state, meaning the auto start-stop system is currently operational. The use of the auto start-stop system is subject to certain conditions, such as insufficient battery charge, excessively high or low temperatures, wheels being in a turning position when stopping, excessively steep slopes, or unfastened seat belts. Below is relevant information about auto start-stop: 1. Introduction: The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine when it's time to move forward again. 2. Operation method: When the car stops due to traffic congestion or at an intersection, the driver steps on the brake pedal and shifts to neutral, causing the engine to automatically stop. To restart, the driver simply needs to press the clutch or accelerator pedal to directly start the engine.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.