Comparison between Saifu ABS and Bosch ABS

2 Answers
StMaya
07/28/25 11:00pm
Saifu ABS is slightly better than Bosch ABS. Working principle of ABS: During braking, the ABS quickly determines the wheel lock-up state based on the speed signals from each wheel speed sensor, closes the normally open input solenoid valve on the wheel that begins to lock up, and keeps the braking force unchanged. If the wheel continues to lock up, the normally closed output solenoid valve is opened, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing the wheel from completely locking up due to excessive braking force. This keeps the braking state at the optimal point (slip ratio S of 20%), achieving the best braking effect and the highest driving safety. Functions of ABS: Maximize the effectiveness of the brake, shorten braking time and distance. Effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability. Allow steering during emergency braking, providing good steering control. Avoid severe friction between tires and the ground, reducing tire wear.
Was this review help?
7
4
Share
SanGenesis
08/12/25 3:26am
I've been playing with cars for over a decade, and ABS systems are quite interesting to compare. SAIFF ABS is commonly found in high-end brands, offering smoother braking control on slippery roads with rapid response. Bosch ABS has higher popularity and is widely used in economy cars—safe and reliable but feels slightly stiffer in operation. In actual driving, both prevent wheel lock-up, though SAIFF technology performs more delicately on complex road surfaces. Price-wise, Bosch parts are cheaper and easier to replace, while SAIFF repairs might cost more. Considering vehicle usage, performance enthusiasts may prefer SAIFF, while pragmatists would choose Bosch. For daily use, the difference is minimal, and both ensure safety without issues.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the typical ground clearance of an off-road vehicle?

Off-road vehicles typically have a ground clearance of 700mm or more. Below is some relevant information about off-road vehicles: 1. Principle: The principle of the differential—if one wheel loses sufficient traction, it will spin at double speed. Usually, all-wheel drive can solve the problem. To further enhance performance, a differential lock is needed to lock the differential effect. This feature is not very useful and is not complex; tractors designed for southern paddy fields all have this device. Having this in a car is essentially a meaningless 'full configuration,' much like a cigarette lighter, which is rarely used. 2. Precautions: Off-road vehicles are rugged, but driving them requires careful attention and should not be done with arrogance. When in off-road mode, maintain a calm mindset, observe your surroundings, and decide on the appropriate gear before driving. When entering hazardous areas, remember one word: 'slow.'
15
2
Share

How to Open the Front Hood of a Lavida Hatchback?

The method to open the front hood of a Lavida Hatchback is: 1. Locate the black handle below the left side of the steering wheel and pull it firmly to lift the front hood; 2. Reach into the area near the front hood emblem, flip the internal latch to open it. Taking the 2017 Lavida Hatchback Manual Fashion Edition as an example, it is a compact 5-door, 5-seat hatchback with body dimensions of: length 4445mm, width 1765mm, height 1485mm, and a wheelbase of 2610mm. The 2017 Lavida Hatchback Manual Fashion Edition is equipped with a 1.6L naturally aspirated engine and an MT manual transmission, delivering a maximum power of 81 kW and a maximum torque of 155 Nm.
8
2
Share

Does Parking Without Straightening the Wheels Damage the Car?

Parking without straightening the wheels can indeed damage the car, with the following impacts: 1. Accelerates the aging of the steering tie rod; 2. Speeds up the wear of the power steering pump; 3. Causes the suspension to tilt in the direction the wheels were left turned, leading to wear on the soft-supporting rubber pads and bushings; 4. Increases the side force on the tires, resulting in wear on the tire sidewalls or even causing a blowout. Tires are one of the crucial components of a car, directly in contact with the road surface and working in conjunction with the vehicle's suspension to absorb shocks during driving. They ensure a comfortable ride and smooth driving, maintain good adhesion between the wheels and the road, enhance the car's traction, braking, and off-road capabilities, and bear the weight of the vehicle.
19
5
Share

Will the steering gear be damaged if the right front wheel is hit?

However, in general, the possibility of the steering gear being damaged is not very high, because the steering gear itself is not very large and is relatively sturdy. If the collision is very severe, the steering gear could also be damaged. Introduction to the steering gear: The steering gear, commonly known as the direction machine, is the most important component of a car for steering function and an important guarantee for driving safety. Categories of steering gears: The steering systems configured in cars can be roughly divided into four categories: mechanical steering gear; mechanical hydraulic power steering system; one is the electronic hydraulic power steering system; the other is the electric power steering system.
14
4
Share

What causes the low beam lights of Maxus G10 not to work?

Maxus G10 low beam lights not working can be caused by bulb damage or a blown fuse. Bulb damage: Ordinary bulbs have a certain lifespan. When nearing the end of their life, the light intensity may not meet standards, and they may overheat until the filament burns out. Additionally, other factors such as water ingress into the headlight assembly after the vehicle has been through water can cause the hot bulb to crack when suddenly cooled by water droplets, leading to failure. Blown fuse: The low beam light fuse is typically located in the engine compartment fuse box or the fuse box on the left side of the instrument panel. The fuse diagram is usually on the back of the fuse box cover. Use a specialized clip to remove and inspect the fuse.
6
0
Share

Which side is the longer valve spring on the Teana?

The longer valve spring on the Teana is on the exhaust valve. The function of the valve is specifically responsible for inputting air into the engine and expelling the exhaust gases after combustion. In terms of engine structure, it is divided into intake valves and exhaust valves. Taking the Teana 2021 model as an example, its body dimensions are: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, and fuel tank capacity 61.3l. The Teana 2021 model is equipped with a 2.0l naturally aspirated engine, with a maximum power of 115kw and a maximum torque of 197nm, matched with a CVT continuously variable transmission.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.