Chery Qoros 8 Dimensions

What gasoline grade should be used for the PCX160?

The PCX160 should use 95-octane gasoline. Below is relevant information about 95-octane gasoline: Composition of 95-octane gasoline: 95-octane gasoline consists of 95% isooctane and 3% n-heptane. When the engine's compression ratio is high, high-octane gasoline should be used. If low-octane gasoline is used with a high compression ratio, it can cause abnormal combustion, leading to knocking, increased fuel consumption, and reduced driving power. High-compression engines can also use lower-grade gasoline, but the choice of gasoline grade should not be blindly based on the compression ratio. Instead, follow the manufacturer's recommendations for refueling. Significance of 95-octane gasoline: The implementation of this standard will help improve the overall quality of automotive gasoline in China and reduce pollutant emissions from motor vehicles. Emissions of nitrogen oxides and particulate matter from new vehicles can be reduced by 25% to 80%, while emissions from in-use vehicles can be reduced by 10% to 15% overall. This standard is of great significance for protecting the environment and improving air quality.

12

1

Share

Where to Check the Tire Pressure Monitoring Device?

The tire pressure monitoring device can be viewed on the dashboard, and its function is to automatically monitor the tire pressure in real time while the car is in motion. The method to eliminate the tire pressure warning light is: 1. Press the car's brake pedal and press the car's one-button start key until the entire vehicle's power is turned on; 2. Inflate all four tires of the vehicle to the standard pressure; 3. Press and hold the vehicle's tire pressure warning light reset button. The principle of tire pressure monitoring is: 1. Direct tire pressure monitoring devices use pressure sensors installed in the tires to measure the tire pressure, and wireless transmitters send the pressure information from inside the tire to the central receiver module to display the tire pressure data; 2. Indirect tire pressure monitoring works by detecting when the tire pressure drops, the vehicle's weight causes the rolling radius of that wheel to become smaller, and by comparing the speed differences between the tires to achieve the purpose of monitoring tire pressure.

5

1

Share

What are the methods to extend the service life of tires?

Methods to extend the service life of tires include: 1. Rotate tire positions every 10,000 kilometers to evenly distribute tire fatigue, prevent uneven wear, and prolong tire life; 2. Regularly check tire pressure; 3. Remove foreign objects from tires to prevent punctures. Tires are circular elastic rubber products mounted on various vehicles or machinery, usually installed on metal rims, capable of supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. The functions of tires are: 1. To mitigate the impact experienced during vehicle operation; 2. To ensure good comfort and smooth driving; 3. To ensure good adhesion between the wheels and the road surface, improving the vehicle's traction, braking, and off-road capability; 4. To bear the weight of the vehicle.

10

1

Share

What tires are suitable for the Camry?

The Camry is suitable for using original factory tires. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are typically installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining driving performance. The Camry's body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60 liters, and trunk capacity 593 liters. The Camry is equipped with a 2.0L engine and a CVT continuously variable transmission, featuring front-wheel drive. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs an E-type multi-link independent suspension.

19

5

Share

Does the Sylphy have an anti-collision beam?

The Sylphy is equipped with an anti-collision beam, which is a device designed to absorb collision energy and mitigate impact during a crash. It consists of a main beam, an energy absorption box, and mounting plates that connect to the vehicle. Both the main beam and the energy absorption box effectively absorb collision energy during low-speed impacts. Taking the 2021 Sylphy as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm and a minimum ground clearance of 166mm. The 2021 Sylphy is powered by a 1.6L naturally aspirated engine, delivering a maximum power of 90kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission.

1

0

Share

What are the length, width, and height of the Jetta VA3's body?

The Jetta VA3's body length, width, and height are: 4501mm, 1704mm, and 1469mm. The Jetta VA3 is a compact 4-door, 5-seater sedan with a wheelbase of 2604mm and a fuel tank capacity of 52.8 liters. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension. The Jetta VA3 is equipped with a 1.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 82 kW at 6100 rpm and a maximum torque of 145 Nm at 4000 rpm.

19

0

Share

Chery Qoros 8 Dimensions

What gasoline grade should be used for the PCX160?

Where to Check the Tire Pressure Monitoring Device?

What are the methods to extend the service life of tires?

What tires are suitable for the Camry?

Does the Sylphy have an anti-collision beam?

What are the length, width, and height of the Jetta VA3's body?

What is the jl478qep engine?

Does a Car Battery That Won't Start Need to Be Replaced?

How Significant Is the Impact of Water-Diluted Gasoline on Vehicles?

What is PEA fuel additive?