Chery A3 has no response when starting?

What is the meaning of PAO engine oil?

PAO engine oil refers to a Group IV synthetic base oil. Here are some introductions about PAO engine oil: 1. Olefins: The PAO in engine oil refers to olefins. PAO is the abbreviation of PolyAlphaOlefin, meaning olefins, which are Group IV synthetic base oils. Polyalphaolefin base oils should be classified as synthetic base oils. 2. Synthetic oil: Synthetic base oils are composed of large molecules that are refined through complex chemical reactions such as polymerization and catalysis from ethylene and propylene dispersed from natural gas or gas in crude oil.

11

1

Share

What are the signs of a motorcycle burning oil?

Motorcycles burning oil generally exhibit the following symptoms: 1. Smoke from the exhaust pipe: If you can clearly see blue smoke coming from the exhaust pipe, it basically indicates a very serious oil burning phenomenon in the engine. 2. Rapid consumption of lubricating oil: If the amount of lubricating oil decreases too quickly, the engine is experiencing oil burning, although the issue is not yet very severe at this stage. 3. The exhaust gas from the exhaust pipe has a burnt oil smell. The six major functions of motorcycle oil: 1. Lubrication and friction reduction. 2. Cooling and temperature reduction. 3. Cleaning and purification. 4. Sealing and leak prevention. 5. Rust and corrosion prevention. 6. Vibration damping and cushioning.

16

5

Share

Is it reasonable for a 4S shop to charge disassembly and assembly fees for water-damaged cars?

It is reasonable for a 4S shop to charge disassembly and assembly fees for water-damaged cars. Here are some introductions about water damage in cars: 1. Handling methods: After the vehicle is flooded, do not start the car. Take photos on the spot, including the license plate number, which can serve as evidence for claims. Call the insurance company to report the incident. Call for a rescue tow truck and inform the insurance company about the repair shop where the car will be placed. 2. Water damage situations: If the water damage inside the car is not severe, simply open the windows on a sunny day to allow thorough drying. If water has entered the cabin, the repair process mainly involves draining the accumulated water inside the cabin. Opening the rubber plugs can help release the water inside the cabin, and placing the car in a spacious area facilitates the evaporation of moisture.

2

4

Share

What should I do if my C1 driver's license has accumulated 12 penalty points?

C1 driver's license holders must undergo re-education after accumulating 12 penalty points. Here is some information about accumulating 12 penalty points on a C1 driver's license: 1. C1 driver's license: If a C1 driver's license accumulates 12 penalty points, the license will be suspended. The driver must report to the traffic management department of the public security authority at the place where the license was issued or where the violation occurred to receive 7 days of road traffic safety regulations education. 2. Examination: After passing the subject one exam, the penalty points will be cleared and the driver's license will be returned. Those who fail the exam must reschedule and retake it. For those who accumulate more than 12 but fewer than 24 penalty points, only the subject one exam is required. Those who accumulate 24 penalty points must also take the subject three exam.

10

0

Share

How to Confirm ETC is Working Normally?

Methods to check if ETC is functioning properly: Manually insert and remove the card once. If there is a sound, it proves that the ETC is in normal working condition. ETC working principle: Through the dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna on the ETC lane of the toll station, the computer networking technology is used to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping while being able to pay the highway or bridge fees. Where can ETC be installed: For small vehicles such as cars and minivans, the OBU device is installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the middle lower part. ETC installation position requirements: The height should not be less than 1.2 meters or higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

5

3

Share

What Does the Car Kettle Dripping Symbol Mean?

The car kettle dripping symbol means the engine oil indicator light. Here is some information about the car kettle dripping symbol: 1. Car Dashboard: The kettle symbol displayed on the car dashboard is the engine oil indicator light. It is normal for this light to come on when you first start the car. If it stays on while driving, it indicates an engine fault, and the car needs to be inspected and repaired. 2. Water Symbol: The kettle dripping symbol in the car is used to indicate whether the engine oil pressure is normal. It will light up if the oil pressure is abnormal. Check if there is any engine fault, and if necessary, take the car to a 4S shop for inspection. The reason the engine oil pressure warning light stays on is that the engine oil level is too low.

14

1

Share

Chery A3 has no response when starting?

What is the meaning of PAO engine oil?

What are the signs of a motorcycle burning oil?

Is it reasonable for a 4S shop to charge disassembly and assembly fees for water-damaged cars?

What should I do if my C1 driver's license has accumulated 12 penalty points?

How to Confirm ETC is Working Normally?

What Does the Car Kettle Dripping Symbol Mean?

Can I use the old license plate on a new car?

What is the purpose of the shark fin on the roof of a car?

What is the ABS system?

How to Use Airbags Correctly?