Can You Wear Slippers While Riding a Motorcycle?

What Causes Car Shaking and Engine Light Illumination?

Car shaking and engine light illumination can be caused by: 1. Engine carbon buildup: When carbon accumulates excessively in the engine, its operational state becomes abnormal, leading to intensified engine shaking; 2. Poor fuel quality: Low-quality fuel may not burn completely in the engine, producing impurities that can clog internal engine passages, triggering the engine warning light; 3. Overheating inside the engine can cause knocking. When the ECU detects engine knocking, it attempts to mitigate it by delaying ignition. If the knocking exceeds the ECU's adjustment capacity, the engine warning light will illuminate along with persistent knocking.

1

2

Share

What are the 1.8t cars?

1.8t cars include Citroen C5, Changan CS75, Geely Boyue, imported Audi A6, etc. Here, 't' stands for Turbo, which refers to an engine equipped with an intake turbocharging device. 1.8t means a 1.8-liter displacement engine with an added intake turbocharging device. A turbocharger is essentially an air compressor that increases the intake air volume by compressing air. The new Dongfeng Citroen C5 features a simple overall interior design, with the steering wheel changed from the original four-spoke to a three-spoke design. The new Changan CS75 adopts a large-sized front grille design with five chrome strips for decoration, integrated with the headlights, which also feature a new design. The Boyue retains the family-style front face, with three pentagon-shaped chrome strips embedded in the front grille and connected to the headlight clusters on both sides, complemented by a large trapezoidal air intake below and new-style fog lights on either side. The Audi A6 features a multi-horizontal-slat front grille, and the rear exhaust layout adopts a dual-exit design.

6

0

Share

Where is the drainage hole of the Magotan door?

The drainage holes of the Magotan door are located at the lower part of the door. There are two holes on the inner edge of the door outer panel. Here is more information about the drainage holes: 1. The drainage outlets on the car can be divided into door drainage outlets, sunroof drainage outlets, air conditioning drainage outlets, fuel filler drainage outlets, and drainage outlets under the front windshield according to their different distribution positions. Although the door glass is tightly connected with the sealing rubber strip, more or less water will flow into the door through the gap between the sealing strip and the glass when it rains. The accumulated water flowing into the door will be discharged through the drainage holes at the lower part of the door. 2. If the drainage holes are blocked, the accumulated water will deposit inside the door. Over time, it will cause rust and corrosion of the door sheet metal. If the amount of accumulated water is too much at one time, the water will flow out from the gap between the door inner panel and the door sheet metal and into the cab. Usually, small advertisements stuffed on the glass must be paid attention to, and do not let them fall into the door. After rotting, they are very easy to block the door drainage holes.

9

5

Share

How to Reset the Maintenance Light on the New Tucson?

The method to reset the maintenance light on the new Tucson is as follows: 1. Turn the key to the vehicle's power position, and the dashboard will display a message indicating the vehicle needs maintenance. 2. Press the confirmation button to complete the maintenance light reset. 3. In addition to self-resetting, you can also take the car to a 4S shop to use a car diagnostic tool to clear the maintenance information warning light. Relevant information is as follows: 1. The Tucson's exterior adopts Hyundai's latest family design style, featuring a hexagonal front grille with a piano black finish, making the car look very harmonious. The chrome trim decorations are designed with a matte finish, and the headlights are designed in a split style. 2. The configuration includes the Hyundai SmartSense safety system, which comes with more than ten active and passive safety features, such as lane-keeping assist, BCA blind-spot collision avoidance assist, and high-speed cruise control, not only improving driving safety but also reducing the driver's burden. 3. The powertrain is equipped with a 1.6T turbocharged engine, with a maximum torque of 265 N·m and a maximum power of 130 kW, meeting the daily driving needs of the vehicle.

15

3

Share

Which Air Setting to Use for Defogging the Windshield?

Using the cold air setting is more effective because when the outside temperature is higher or lower than the inside temperature, condensation forms on the glass. You can also avoid using the air conditioner by opening the windows, which will make the fog disappear as well. Hot air can also dry the fog, but it is not as effective as cold air. Here are the correct methods to remove fog from the windshield: 1. Using the air conditioner's cold air to defog: The most effective way to remove fog from the windshield is to turn on the air conditioner (A/C) in cooling mode, activate the external circulation, and direct the airflow toward the windshield at maximum speed. The dry cold air will blow directly onto the windshield, creating a 'film of air' that prevents water vapor from condensing on the glass. The fog will disappear in less than a minute. 2. Using warm air to defog: The method is the same as using cold air, but instead of cold air, direct warm air toward the glass. This essentially dries the water vapor, eliminating concerns about fog reappearing. However, warm air defogging is slower than cold air, and the fog may initially worsen when first turned on, requiring a few minutes of patience.

10

0

Share

What are the symptoms of a broken engine flywheel?

Engine flywheel failure symptoms include: crankshaft fatigue, longitudinal cracks in the flywheel housing, etc. The flywheel is a disc-shaped component with significant rotational inertia, functioning as an energy storage device. For four-stroke engines, only one power stroke occurs every four piston strokes—meaning only the power stroke generates work, while the exhaust, intake, and compression strokes consume energy. This results in periodic torque fluctuations from the crankshaft and unstable crankshaft speed. To mitigate this, a flywheel is installed at the rear end of the crankshaft. Positioned at the crankshaft's power output end (connected to the transmission and working equipment), the flywheel primarily stores energy and inertia outside the engine's power stroke. In four-stroke engines, the energy for intake, compression, and exhaust strokes is supplied by the flywheel's stored energy.

9

4

Share

Can You Wear Slippers While Riding a Motorcycle?

What Causes Car Shaking and Engine Light Illumination?

What are the 1.8t cars?

Where is the drainage hole of the Magotan door?

How to Reset the Maintenance Light on the New Tucson?

Which Air Setting to Use for Defogging the Windshield?

What are the symptoms of a broken engine flywheel?

Should You Press the Clutch When Braking in a Manual Car?

Is the Annual Inspection Label Replaced Every Year?

How to Use a Tire Pressure Gauge?

Can Car Wheel Hubs Be Repainted?