Can You Wear a Sun Hat While Driving?

1 Answers
VonLuke
07/29/25 8:09pm
In China's road traffic regulations, there is no rule prohibiting wearing hats while driving, so it is permissible to wear a sun hat. However, regardless of the style, wearing a hat can to some extent obstruct your vision. For safety reasons, it is recommended not to wear a hat while driving. Driving Precautions: Do Not Use Mobile Phones While Driving: If a driver is caught making or receiving phone calls, watching TV, or engaging in any other behavior that hinders safe driving while operating a motor vehicle, they will be fined a certain amount and have 2 points deducted from their license. If you must take a call, pull over to the side of the road and handle the matter before continuing to drive. Do Not Wear High Heels, Slippers, or Drive Barefoot: According to the Road Traffic Safety Law, drivers are not allowed to operate a motor vehicle while wearing high heels exceeding 4 centimeters in height. Violators will receive a warning and a fine. If an accident occurs, the driver will be fined and held fully responsible for the accident due to failing to maintain a safe distance and wearing high heels while driving. Do Not Wear Gloves While Driving: Wearing gloves while driving can easily cause the steering wheel to slip during turns. In the case of sharp turns, this can lead to understeering and accidents. Remove Accessories and Pendants While Driving: In the event of a sudden emergency while driving, the body may lurch forward due to inertia, and the seatbelt can exert significant pressure on the body. If you are wearing a pendant at this time, it could cause serious injuries such as sternum fractures.
Was this review help?
9
3
Share
More Forum Discussions

How many days does it take to transfer vehicle files from Harbin to Qiqihar?

Transferring vehicle files from Harbin to Qiqihar generally takes 3 days. For cross-region vehicle transfers, the vehicle management office will issue the vehicle files and temporary license plates within three days after accepting the application. Vehicle file transfer process: When the vehicle owner applies for the vehicle transfer-in procedure, they need to submit an application to the local tax authority with the original tax payment certificate issued by the tax authority of the transfer-out location, the file transfer notice, vehicle files, a copy of the "Motor Vehicle Driving License", and other required documents. After verifying these documents, the local tax authority will process the vehicle purchase tax transfer. Precautions for file transfer: For vehicle ownership transfer, both parties involved and the vehicle must appear together at the vehicle registration office to apply for the procedure.
16
0
Share

What are the consequences of speeding on highways?

Speeding at highway speed monitoring points will be photographed by electronic police: 1. If the speed exceeds the limit by less than 10% on highways or national roads, a warning will be issued without penalty points or fines, and no need to visit the vehicle management office; 2. If the speed exceeds the limit by 10% to 20%, 3 penalty points will be deducted along with a fine; 3. If the speed exceeds the limit by 20% to 50%, 6 penalty points will be deducted along with a fine; 4. If the speed exceeds the limit by more than 50%, 12 penalty points will be deducted at once along with a fine, and the driver's license may also be revoked, with the fine amount increasing as the speeding rate rises; 5. If the speed exceeds the limit by 70%, a fine will be imposed, 12 penalty points will be deducted, and the driver's license may also be revoked.
16
0
Share

What is the fuel tank capacity of the Changan Ruixing M80?

Small cars have a fuel tank capacity of 35-45 liters, while medium-sized cars have a fuel tank capacity of around 55-75 liters. Additional information is as follows: 1. Driving range: A full tank can typically cover about 500 kilometers. The size of the fuel tank depends on the vehicle's displacement and fuel consumption—larger fuel tanks are for vehicles with higher fuel consumption, and smaller tanks are for those with lower consumption. The fuel tank capacity is designed to allow a driving range of 400~600 kilometers. Lighter vehicles with smaller displacements have correspondingly smaller fuel tanks, while heavier vehicles with larger displacements naturally have larger fuel tanks. However, the maximum range on a full tank is generally between 400~600 kilometers. 2. How to determine a car's fuel tank capacity: The standard unit for measuring fuel tank capacity internationally is liters (L). Different countries have their own standards for fuel tank capacity. In China, the fuel tank capacity is set at 95% of the rated value, but in practice, the actual capacity is often greater than the nominal capacity, so there's no need to worry about the fuel tank being smaller than expected.
13
4
Share

Can a Motorcycle Engine Blow Up from Riding Too Fast?

Motorcycle riding too fast may potentially cause engine seizure, but it generally does not happen. Causes of motorcycle engine seizure: Motorcycle "engine seizure" is usually caused by poor lubrication, excessive load, or engine overheating. If the riding speed is too high and sustained for too long or the load is excessive, there is a possibility of "engine seizure." However, as long as the speed is not sustained for too long and the engine oil lubrication is normal, there should be no issues. That said, high-speed riding causes significant wear to the engine, and frequent high-speed riding will inevitably shorten its normal lifespan. Precautions for long-distance riding: For example, regularly maintain the motorcycle using high-quality lubricating oil. Additionally, for safety reasons, the rider must take appropriate breaks. Under normal circumstances, after about three hours of riding, a break of half an hour or a quarter of an hour should be taken.
9
2
Share

Why does the Volkswagen T-Roc make abnormal noises at low speeds?

Abnormal braking noises at low speeds are likely due to severely worn brake pads, where the warning shim emits sharp abnormal sounds to prompt replacement. Alternatively, excessive wear on the brake disc or brake drum, which becomes too thin, can also cause abnormal noises. Another possibility is that newly replaced brake pads may not fit properly with the brake disc or drum, resulting in point or line contact that generates abnormal noises. Additional information is as follows: 1. Brake lifespan: The replacement cycle for brake pads is not fixed and depends on the vehicle's driving conditions, the frequency and intensity of the driver's use of the brake pedal. Front brake pads wear out faster than rear ones, with a lifespan of approximately 30,000-50,000 kilometers for front brake pads and 100,000-150,000 kilometers for rear brake pads. 2. Specific causes: Faults in the caliper, brake disc, or brake pads can all produce such noises. If the noise is continuous, the first step is to check for dragging brakes, as poor caliper reset can cause prolonged friction between the disc and pad, leading to abnormal noises under certain conditions. If the noise occurs immediately after installing new pads, it may be due to a mismatch in size between the new pads and the friction block.
7
2
Share

What is the pressure for adding refrigerant to a car?

Generally, the pressure for adding refrigerant to a car's air conditioning system is 150-250 kPa for the low pressure side and 1300-1500 kPa for the high pressure side. Methods for adding car refrigerant: It can be added from either the high-pressure side or the low-pressure side. These two methods differ significantly due to the state of the refrigerant being added. The high-pressure side method involves adding liquid refrigerant, which is suitable for the initial filling after leak detection and vacuuming. Note that this method requires the engine to be off, and the refrigerant can must be inverted. The low-pressure side method involves adding gaseous refrigerant, which is slower and typically used for topping up refrigerant. Precautions when adding car refrigerant: After completing the refrigerant addition, close the low-pressure manual valve on the manifold pressure gauge, shut off the injection valve on the refrigerant can, stop the engine, and quickly remove the manifold pressure gauge from the compressor to prevent excessive refrigerant leakage.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.