Can You Use Spray Paint on a Car?

Can the car still be driven when it reminds to change the oil?

When the car reminds you to change the oil, it can generally still be driven, but it is recommended to go to a repair shop immediately for an oil change. To check the oil level, you can observe whether the oil level on the dipstick is within the normal range. The steps are as follows: 1. Park the vehicle on a flat surface, turn off the engine, and wait for 15 minutes to allow the oil to flow back into the oil pan. 2. First, pull out the dipstick, wipe it clean, and then slowly reinsert it, ensuring that the dipstick reaches the bottom of the oil pan. 3. Pull out the dipstick again and check the oil level. If the oil level is within the upper and lower limits of the dipstick, it is normal. If it is above the upper limit, some oil needs to be drained. If the oil level is below the lower limit, the corresponding amount of oil needs to be added.

14

3

Share

What to Do About Car Scratches?

Methods for dealing with car scratches are as follows: 1. Scratches that have reached the primer should be repainted. 2. Scratches that have not reached the primer can generally be handled with polishing. Below are the treatment methods based on the extent of damage: Minor scratches: During driving, smoke, dust, and sand in the air can cause fine scratches on the car's paint surface. Such scratches can be removed with wax containing fine cutting abrasives. Light scratches: Scratches left by keys on the car paint, with slight depressions. This damages the transparent layer of the paint surface. Using fine abrasive wax can repair such light scratches. Moderate scratches: If the scratches are clearly visible and the color paint layer is felt, it is recommended to go to a professional car repair shop for treatment.

1

4

Share

What is the function of antifreeze?

Antifreeze works by cooling the engine of a motor vehicle through liquid cooling, keeping it in the optimal working state. It prevents freezing in winter and boiling in summer. The full name of antifreeze should be antifreeze coolant, meaning a coolant with antifreeze function. Antifreeze prevents the coolant from freezing when the vehicle is parked in cold winter, which could otherwise cause the radiator to crack or the engine cylinder block or head to freeze. Its main components are: 50% purified water, 40% methanol, and 10% other substances. The basic indicators of antifreeze are its freezing point and boiling point. The market offers antifreeze with freezing points of -15℃, -25℃, -30℃, -40℃, etc. Generally, it is advisable to choose one with a freezing point at least 10℃ lower than the lowest temperature in your region. Vehicle antifreeze typically needs to be replaced every 2 years or 40,000 kilometers, which is just a reference interval. For commercial vehicles with longer mileage, the replacement cycle should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Regularly check the antifreeze level. If it is found to be insufficient, replenish it promptly. If suspended particles, sediments, or signs of deterioration or discoloration are observed in the antifreeze, replace it immediately and clean the system. When replacing, always use the same brand of antifreeze. Different brands may have varying production formulas, and mixing them could lead to chemical reactions among additives, rendering them ineffective. Methods to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze, though it could also be caused by excessively high engine temperature. Check the antifreeze reservoir. If the level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level scale on the antifreeze bottle. The normal antifreeze level should be between the maximum and minimum marks. If it is below the minimum mark, it indicates a shortage of antifreeze.

4

0

Share

What to Do When the Car Interior Fogs Up on Rainy Days?

If the car interior fogs up, the following methods should be used to clear it promptly. 1. Use the air conditioning system to adjust the temperature for defogging. 2. Turn on the cold air to blow on the glass, which quickly eliminates fogging—the defogging effect is very direct. 3. Use hot air to blow on the glass, but the effect is slower than cold air. When parked, turn on the hot air first, then wipe the glass with a cloth. 4. Open windows for air circulation. If the fogging is not severe and the outside temperature is not too low, you can lower the windows slightly on both sides to allow air circulation inside the car. 5. Use detergent-based antifogging solutions to prevent fogging in advance. Mix the detergent and water in a ratio of about 1:10, then apply it to the inside of the front and rear windshields using a cotton swab or a clean, soft cloth. After drying, wipe off any remaining watermarks on the glass. Using this method in combination with the air conditioning will yield better results.

19

5

Share

Can Windshield Washer Fluid Freeze and Crack the Reservoir?

If the windshield washer fluid is only slightly frozen, it will not crack the reservoir. However, if it freezes excessively, there is a possibility of damage. In mild cases, the reservoir may deform, while in severe cases, it could crack, and the spray piston may also freeze and crack. Therefore, if your current windshield washer fluid does not have antifreeze properties, it is best to replace it with an antifreeze-type fluid. It is recommended to choose a washer fluid with a freezing point at least 10°C lower than the local minimum temperature. If you find that the washer fluid is not spraying out despite the reservoir being full, it indicates that the fluid has frozen. In this case, do not attempt to spray it further, as this could damage the motor. If the sun is strong, you can park the car in direct sunlight at noon and open the hood to let the sun thaw the fluid. If the freezing is not severe, the fluid will eventually melt. Alternatively, you can add some warm water to the reservoir. Once the washer fluid has thawed, drain it completely to prevent refreezing. Additionally, you can start the vehicle and drive for a while to use the engine's heat to thaw the frozen washer fluid, or purchase a specialized de-icer to melt it. After the washer fluid has thawed, remember to promptly replace it with a winter-grade or high-performance antifreeze-type washer fluid to prevent freezing again.

16

5

Share

How long is a study session for Subject 3?

Each study session for Subject 3 lasts 60 minutes, with effective teaching time required to be no less than 45 minutes during clock-in sessions. According to regulations, candidates can clock in a maximum of 4 hours per day, and any sessions exceeding 4 hours will not be counted. The "Motor Vehicle Driver Training Syllabus" stipulates that for common C1 and C2 driver's license tests, 24 study sessions must be completed to schedule Subject 3. This includes 2 theoretical sessions and 22 practical driving sessions. For A1 and B1 licenses, 20 sessions are required, while A2, A3, and B2 licenses require 22, 33, and 32 sessions, respectively. For clocking in study sessions, trainees generally need to input their fingerprints during practice, and instructors must swipe their cards to prevent cheating by substitutes. Some regions have also begun implementing facial recognition for clock-in, which is more convenient.

6

4

Share

Can You Use Spray Paint on a Car?

Can the car still be driven when it reminds to change the oil?

What to Do About Car Scratches?

What is the function of antifreeze?

What to Do When the Car Interior Fogs Up on Rainy Days?

Can Windshield Washer Fluid Freeze and Crack the Reservoir?

How long is a study session for Subject 3?

Can Radiator Coolant Be Mixed with Water?

What is the CAR button in a car?

How to Reduce the Wind Resistance of a Car?

Do You Need to Wait for the Red Light to Make a U-Turn?