···
Log in / Register

Can you turn right from the diversion line?

4 Answers
McTalia
07/30/25 2:35am

When turning right, you are not allowed to drive over the diversion line, nor should you cross any solid lines. At some intersections, you need to obey the traffic light when turning right. Below is the relevant information: Function of diversion lines: As the name suggests, diversion lines are used to guide traffic flow. They are mainly applied at wide, irregular, or complex intersections, highway ramps, or other special locations. These lines serve to alert drivers to pay attention to safety, enhance vigilance, and play a role in regulating, guiding, and warning traffic, thereby reducing the occurrence of accidents. Driving over diversion lines may be photographed: Generally, there are two methods: automatic capture by electronic police and manual capture. Electronic police are distributed at various intersections, and when a vehicle drives over the diversion line, it will be captured. The electronic cameras transmit the data to the backend for processing, and traffic police will further confirm the violation and issue a penalty notice to the driver. The other method involves manual capture by traffic police, which is more flexible, allowing for on-the-spot enforcement.

Was this review help?
20
0
Share
LeKayden
08/16/25 8:47am

I remember driving for over 20 years and never dared to cross the guide line for a right turn—this is no joking matter. Guide lines are usually solid yellow or white lines designed to direct traffic flow and prevent accidents. Crossing them equals violating traffic rules, and if caught by cameras, it means demerit points and fines. I’ve seen many drivers take shortcuts by crossing the lines for right turns, only to end up in minor collisions or being pulled over by traffic police. From a safety perspective, when making a right turn, you should strictly follow the normal lane and avoid cutting corners for the sake of saving time, especially at intersections where guide lines often border motorized lanes, increasing the risk of conflicts with other vehicles. Ultimately, obeying the rules not only protects yourself but also considers others. If in doubt, double-check traffic signs or use navigation for confirmation—it’s the safest approach. Honestly, maintaining patience while driving is more valuable than anything else.

Was this review help?
15
4
Share
Expand All
StJoshua
10/21/25 7:05am

As a young driver, I remember trying to cross the guide line when making a right turn right after learning to drive—it felt quite risky at the time. I nearly collided with an electric scooter beside me, breaking out in a cold sweat, and the thought still makes me shudder. Later, I researched and learned that guide lines are designed to separate traffic flows in different directions. For example, at intersections, they may direct vehicles to diverging lanes. Crossing them is not only a violation but also likely to cause confusion. Now, I strictly stay within normal lanes and would rather wait longer at traffic lights. One more tip: if you're unfamiliar with the route, use a mobile map to check real-time traffic—it can alert you to the correct right-turn point. Safe driving is all about gradually gaining experience, so don’t start off as recklessly as I did.

Was this review help?
9
5
Share
Expand All
DelIvan
12/04/25 7:33am

My driving experience tells me that the diversion line should not be crossed at will when making a right turn. It is a protective line in road design, usually a solid line that prohibits crossing. Crossing the line may violate traffic rules and result in a ticket. From my daily observations, when turning right, one should look for a dedicated lane or arrow indication to avoid taking shortcuts. Once you cross the line, risks include accidents or conflicts with other vehicles. It is recommended to observe the signs in advance and make a normal right turn to avoid trouble. In short, following the rules is the golden rule.

Was this review help?
4
4
Share
Expand All
More Forum Discussions

How often should the gasoline filter of Toyota Levin be replaced?

Toyota Levin's gasoline filter should be replaced every 25,000 kilometers or 15 months, whichever comes first. The gasoline filter, also known as the fuel filter, is a type of fuel filter that removes impurities from the fuel, providing clean fuel to the engine. It is an important automotive component that protects the engine and fuel supply system. The Levin is a compact car introduced by Toyota, equipped with two powertrain options: a 1.2T turbocharged engine and a 1.8L hybrid system. In terms of configuration, the Levin series features LED headlights, eight airbags, the Toyota Safety Sense intelligent safety system, and has body dimensions of 4640mm in length, 1780mm in width, 1455mm in height, with a wheelbase of 2700mm.
5
2
Share

How to Turn On the Sound of a Dash Cam?

The method to turn on the sound of a dash cam: It can be enabled in the settings, and it comes with a recording function. A dash cam is an instrument that records images and sound-related information during vehicle travel. After installing a dash cam, it can record the entire driving process's video images and sound, providing evidence for traffic accidents. The components of a dash cam: 1. Main unit: Includes a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, etc. If the main unit does not include a display or printer, it should have corresponding data display and print output interfaces; 2. Speed sensor; 3. Data analysis software.
19
4
Share

How to Solve Fogging on the Car's Front Windshield?

Press the defogging button, turn on the air conditioning cooling (A/C) switch, set the temperature to the lowest, and turn on the external circulation to defog. Both cold and warm air can be used to defog the car glass, but warm air is slower than cold air. The most effective method is to use cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used for defogging on rainy days, as it may initially increase fogging. When the car glass fogs up, the external circulation should be turned on. The reason for fogging on car glass: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface of the side with the lower temperature will have a saturated vapor pressure lower than the surrounding environment's vapor pressure, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fogging. Methods to defog car glass: Air Conditioning Cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on promptly, the exhaled air has high humidity, and the front windshield will quickly fog up. At this time, you can turn on the air conditioning to blow cold air onto the front windshield, using the dehumidification function to remove the fog quickly. However, if the humidity is too high and the air conditioning is not effective enough, you can slightly open the window to quickly reduce the humidity inside the car. Of course, combining this with the air conditioning will yield faster results. Air Conditioning Warm Air: Use the method of reducing the temperature difference to remove fog. In winter, blowing warm air onto the glass quickly raises the temperature of the front glass, reducing the temperature difference between the inner and outer surfaces of the window glass, thereby preventing excessive fogging on the front windshield. However, it should be noted that the rear and side glass temperatures rise more slowly, so it takes longer to remove all the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. The air conditioning temperature control should not be set to the coldest position, as this may cause the outer surface of the windshield to fog up over time. Spraying Anti-Fog Agents for Prevention: Spray a small amount of defogging agent on the car glass and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog. This is particularly suitable for cold winters. Alternatives to defogging agents include dish soap, soapy water, glycerin, alcohol, or salt water. After applying and letting it dry, use a chamois or soft dry cloth to wipe off any excess residue, ensuring the car glass remains fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, you can open the windows on both sides to create airflow between the inside and outside of the car, reducing the temperature difference and gradually dissipating the fog. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows for airflow is very obvious—it cannot be used during rain, snow, on highways, or when the fog is heavy. Rear Windshield Heating: Most cars have a rear windshield electric heating function, although the button locations may vary, the function is the same. Turn on the windshield heating switch, and the fog on the rear windshield will disappear in about a minute.
12
1
Share

What are the reasons why an automatic transmission car suddenly won't start?

There are several reasons why an automatic transmission car may suddenly fail to start: 1. The car is out of fuel; 2. The battery is not supplying power; 3. The gear is in the wrong position; 4. The fuel line is blocked; 5. The fuel pump is damaged; 6. Modified car circuits or severe vehicle aging; 7. Pressing the accelerator too deeply, causing the fuel injector to flood. An automatic transmission car refers to a vehicle that does not require the driver to manually shift gears, as the car will automatically select the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions: P, R, N, D, S, and L. Automatic transmissions use an automatic gearbox with planetary gear mechanisms to change gears, automatically adjusting based on the degree of accelerator pedal pressure and changes in vehicle speed.
18
1
Share

What are the causes of engine flywheel wear?

Engine flywheel wear is caused by: 1. Improper driving operation; 2. No free travel of the clutch; 3. Insufficient pressure of the clutch pressure plate, which keeps the clutch and flywheel in a semi-engaged state, thereby exacerbating the wear of the flywheel surface. The working surface of the flywheel should be smooth and clean, free from scratches, burns, cracks, warping deformation, and other damage defects. Otherwise, the flywheel should be repaired or replaced. The flywheel is a disc with a large moment of inertia, installed on the flange at the rear end of the engine crankshaft. A ring gear is pressed onto the outer edge of the flywheel, which can mesh with the gear of the starter. At the same time, the rear side serves as a mating surface for the clutch, usually marked with the ignition timing mark for the first cylinder to facilitate the calibration of ignition timing.
18
1
Share

What does China VI mean?

China VI refers to the China 6 emission standard, which primarily pertains to vehicle exhaust emission regulations. The China 6 standard is divided into China 6a and China 6b. According to relevant regulations, the carbon monoxide content under the China 6b standard is reduced by half compared to the China 5 standard, and the standards for carbon oxides are also approximately halved. China 6 adopts the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), comprehensively tightening testing requirements, effectively narrowing the gap between laboratory-certified emissions and real-world driving emissions, and laying the foundation for coordinated control of fuel consumption and emissions. The emission standard improves the emission control level of vehicles under actual driving conditions, facilitates supervision, and effectively prevents cheating behaviors that result in excessive emissions.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.