Can you turn right from a straight and right-turn lane at a red light?

2 Answers
LeMichael
08/30/25 5:28am
You can turn right. Here are some relevant tips about waiting at a red light: 1. When stopping at a red light: Note that if your car is the first in line, it's advisable to maintain a slightly larger distance from the stop line. This ensures you don't run the red light while providing enough space to start moving when the light turns green. 2. If there are many vehicles already queued ahead: Keep a sufficient distance from the car in front. This ensures safety (preventing rollback when the front car starts) and allows ample time and space to observe the movement of vehicles ahead for a smooth start. 3. When stopped at a red light: Always remember to engage the handbrake. Many experienced drivers neglect this, which can be dangerous. Safety should always be a priority - never be careless. Starting without the handbrake may cause the vehicle to roll back, creating a hazardous situation.
Was this review help?
5
5
Share
DeKaden
09/12/25 2:37am
I've been driving for several years and have encountered the issue of whether I can turn right at a red light in a shared straight and right-turn lane multiple times. The general rule is that you can turn right at a red light as long as there is a right-turn arrow or no prohibition sign, but it depends on the specific intersection signals. For example, a circular red light often allows a right turn unless there's a "No Right Turn on Red" sign. In shared lanes, right turns can easily block the view of straight-moving vehicles, increasing the risk of accidents. I suggest drivers develop the habit of slowing down to observe traffic lights and road markings at such intersections, ensuring safety before proceeding. Sharing an experience: last year, I almost hit a pedestrian running a red light when turning right at an urban intersection. Now, I always wait a few extra seconds to check my surroundings. New drivers can check local traffic rules or install navigation apps to avoid misjudgments, protecting both themselves and others.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Adjust the Headrest of a Car Seat?

First, open the car door and enter the vehicle. You will see two protruding headrests on the driver's and front passenger seats. Next, locate the adjustment button for the car seat headrest. The adjustment button is usually located next to the two support rods of the headrest or on the side of the headrest. Then, when adjusting the headrest up or down, you need to press the button at the bottom of the support rods with your hand. Finally, while holding the button, adjust the headrest up or down to a height that suits you.
3
1
Share

Do Spark Plugs Affect Car Fuel Consumption?

Spark plugs do affect fuel consumption. If a spark plug is damaged, it can directly cause an increase in the car's fuel consumption. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance. The condition of the spark plug can be judged based on the following color observations. A normal spark plug's insulator skirt and electrodes appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm, and no signs of electrode burning. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, with oil seepage. Steps to replace a spark plug: Open the engine hood and lift the plastic cover of the engine. Remove the high-voltage wires, marking each cylinder's position to avoid confusion. Use a spark plug socket to remove each spark plug one by one. While removing, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage wires according to the firing order, then secure the cover.
17
1
Share

How to Adjust the Front and Back Position of a Car Seat?

Leave at least a finger's width of space between your head and the headrest to prevent head bumps during bumps. Also, ensure that your hands can comfortably reach the steering wheel and your feet can easily operate the accelerator or brake pedal. First, press the front and back adjustment button to push the seat backward, then test if you can comfortably reach the pedals. When pressing the brake pedal to the limit, your legs should still have a slight bend. Tilt the backrest slightly, but maintain a level line of sight. If there's a gap in your lower back, use a cushion. For additional tilt, add a headrest to keep your gaze level. If there are still any discomforts while driving, continue adjusting the seat.
17
0
Share

What is the installation method for car seat covers?

Before installing the car seat covers, please check the quality of the seat covers, whether the stitching is sturdy, and if the length is appropriate. The front driver's seat cover usually has a headrest cover, which can be directly pulled down over the seat. Then, there is one or two buckles at the joint of the seat cover. Insert the buckles into the gaps of the seat by hand to prevent the seat cover from moving forward. Some buckles do not have small hooks but come with elastic bands. In this case, thread one end of the buckle through the gap and lock it with the other end. After installing the long seat cover, make sure to reset the seat belt. Insert the fixing clips of the long seat cover and backrest into the gaps, then smooth out the seat cover.
15
2
Share

What to Do If the Small Green Book Is Lost?

When the motor vehicle registration certificate is lost, the owner of the motor vehicle should promptly apply for a replacement at the vehicle management office under the jurisdiction of the motor vehicle. Contact the original owner, who should personally drive to the vehicle management office with their ID card and driving license to apply for a replacement. The current owner must personally drive to the vehicle management office with their ID card and driving license to apply for a replacement. This is the only motor vehicle-related service that cannot be handled by a proxy. When applying, the owner of the motor vehicle should fill out an application form and submit proof of identity. For the replacement of the motor vehicle registration certificate, the motor vehicle must also be inspected. The vehicle management office should, within one day from the date of acceptance, confirm the motor vehicle, review the submitted documents and certificates, and issue a replacement motor vehicle registration certificate.
15
5
Share

Is Transmission Fluid the Same as Gear Oil?

Transmission fluid and gear oil are not exactly the same. Generally, transmission fluid includes manual transmission fluid and automatic transmission fluid. Manual transmission fluid is collectively referred to as gear oil, while automatic transmission fluid has a higher grade and is also called drive fluid. Additionally, regular gear oil cannot be used in automatic transmissions. Transmission fluid is an oil product that keeps the vehicle's transmission clean, ensuring its proper operation and extending the lifespan of the transmission components. Gear oil is typically used in gear transmission mechanisms such as the steering gear, transmission, and drive axle of a car, differing from engine oil in terms of usage conditions, composition, and performance characteristics.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.