···
Log in / Register

Can You Turn Right at Three Horizontal Traffic Lights?

1Answers
DavidLee
07/29/2025, 05:17:18 PM

Three horizontal traffic lights allow right turns as long as there are no explicit no-right-turn signs or signs prohibiting right turns on red at the intersection. Below are the precautions for vehicles turning right: 1. Penalties: If there is a dedicated right-turn lane, vehicles must not use other lanes to turn right. When all three lights are red, turning right from a straight lane will trigger automatic camera capture, resulting in a red-light violation, which may lead to demerit points and fines. 2. Reminder: Always observe road signs and avoid relying solely on memory, especially in unfamiliar areas. Some locations may prohibit right turns or right turns on red to alleviate traffic pressure or divert vehicles, but clear signage will be provided. 3. Yielding to Pedestrians: Yield to pedestrians and remain aware of surroundings. Pedestrians and electric scooters may appear during right turns, so vehicles should slow down and wait for them to pass before proceeding.

Was this review help?
109
Share
More Q&A

What is the function of a valve guide?

The valve guide serves to direct the movement of the valve, ensuring that the valve performs reciprocating linear motion, allowing the valve to correctly fit with the valve seat ring and transferring the heat from the valve stem to the cylinder head. There are two types of valve guides: integral and insert types. The integral valve guide directly processes the valve stem hole in the cylinder head, while the insert-type valve guide involves press-fitting a cylindrical tube into the guide hole within the cylinder head. The working temperature of the valve guide is also relatively high, around 200 degrees Celsius. When the valve stem moves within the guide, it is lubricated solely by the oil splashed from the valve train. Therefore, valve guides are often made as separate components from materials with self-lubricating properties, such as ductile iron or powder metallurgy materials, and are press-fitted with a certain interference into the valve guide seat hole on the cylinder head to prevent detachment.
111
Share

How to Clean the Engine Air Intake Grille?

The method to clean the engine air intake grille is as follows: Adjust the water gun to a lower pressure setting, and without opening the car's front hood, aim the water gun at the air intake grille to rinse it. It is recommended to spray water from top to bottom to avoid splashing water into the air intake. The front grille of the car serves as the air intake grille, functioning as a window to supply air to the engine. It is typically located behind the car's front grille and directly in front of the engine compartment, primarily aiding in heat dissipation and engine air intake. The advantages of the air intake grille include: 1. When the vehicle is cold, it helps the engine quickly reach an optimal temperature; 2. When the grille is open, it not only aids in heat dissipation but also reduces air resistance to some extent, thereby improving fuel economy.
105
Share

What is the reason why the gear of Changan CS75 automatic transmission cannot be engaged?

The reason why the gear of Changan CS75 automatic transmission cannot be engaged may be due to a faulty switch under the brake or a problem with the transmission. You can try shaking the steering wheel left and right. If the problem persists, it is recommended to go to a 4S store for inspection and repair. The automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The Changan CS75 is a compact SUV under Changan Passenger Vehicle, with a length, width, and height of 4650mm, 1850mm, and 1705mm respectively, and a wheelbase of 2700mm. In terms of safety configurations, the vehicle is equipped with front and rear airbags, tire pressure monitoring, ABS and body stability control, front and rear parking radar, 360-degree panoramic imaging, and other configurations, providing more confidence and safety assurance while driving.
115
Share

Can an Air Filter Be Reused?

It can be reused, but replacement is recommended. Using compressed air to blow or washing it with water can remove thick accumulated dust, but it is difficult to clean the dust that has been absorbed into the paper. The function of an air filter: to filter out particulate impurities in the air, ensuring that a sufficient amount of clean air enters the cylinder, preventing airborne dust from being sucked into the engine, which can accelerate the wear of the piston group and cylinder. According to the car's maintenance manual, the air filter should generally be replaced every 10,000-20,000 kilometers or every other maintenance interval. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. The location of the car's air filter is determined by the intake form and the engine's structure. It is usually located in the air cleaner on the engine's intake pipe. There are two types of air filters in cars: dry and wet. The dry type is made of paper or organic materials, while the wet type is made of metal mesh. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air style. It is mainly used in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms as an air filter. During operation, the engine sucks in a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, which is particularly serious in dry and sandy working environments. The air cleaner is installed in front of the carburetor or intake pipe to filter out dust and sand particles in the air, ensuring that a sufficient amount of clean air enters the cylinder. Using an excessively dirty air filter: Driving with an excessively dirty air filter can cause insufficient air intake into the engine, leading to incomplete fuel combustion, resulting in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The car's air cleaner is a device that removes particulate impurities from the air, consisting of one or several air filter components. Its main function is to filter out harmful impurities in the air before it enters the cylinder, reducing early wear of the cylinder, piston, piston rings, valves, and valve seats. Therefore, before air enters the cylinder, it must pass through the fine filtration of the air cleaner. An excessively dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if it is found to have little dust and minor blockage, it can be cleaned by blowing compressed air from the inside out and reused. An excessively dirty air filter should be replaced promptly.
101
Share

What to do if the vehicle annual inspection is overdue?

If the vehicle annual inspection is overdue, the handling method is: 1. First, deal with traffic violations and overdue inspections. If the vehicle requires an out-of-town inspection, you need to obtain an out-of-town inspection authorization letter from the vehicle's registration location in advance; 2. Go to the corresponding vehicle management office to handle the annual inspection, and you need to bring the vehicle license, a copy of the compulsory traffic insurance policy, the owner's ID card, and valid proof of this year's vehicle and vessel tax payment or tax exemption. According to the Motor Vehicle Registration Regulations, the owner of the motor vehicle can apply for an inspection compliance mark at the registration location's vehicle management office within three months before the expiration of the motor vehicle inspection period. Before applying, the owner must settle all traffic safety violations and accidents related to the vehicle.
107
Share

How to Turn Off the Car's Wiper?

To turn off the car's wiper: There is a lever for the left and right turn signals below the steering wheel. The top of the lever can be rotated. The OFF mark is the position to turn off the car's wiper. Rotate to this position to turn it off. The INT mark is for automatic intermittent operation. Pull the lever down one notch, and the wiper will start working automatically in an intermittent mode. This gear needs to be manually reset and is suitable for light rain or snow. The wiper is a tool on the front windshield of motor vehicles to prevent rain and other debris from affecting visibility. Temperature changes, sand, dust, etc. can shorten the life of the wiper blades. Regularly cleaning dirt from the windshield and wiper blades, especially after rain, can reduce unnecessary wear and extend the life of the wiper blades.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.