Can You Turn Left at a Circular Signal Intersection?

How Many Days After Motorcycle Registration Can You Take the Test?

There are a total of three subjects for the motorcycle driver's license test. As long as you pass the test, you can get your driver's license within three to seven days. The subject one test is usually taken about a week after registration, but the exact timing depends on the actual situation. Article 27 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" stipulates: The content of the motor vehicle driver's test is divided into subject one (theoretical test), subject two (operational test), and subject three (road driving skills and safe and civilized driving knowledge test). The content of the subject one test includes: road traffic rules, traffic signals, handling of traffic safety violations and accidents, application and use of motor vehicle driver's licenses, motor vehicle registration regulations, and other road traffic safety laws, regulations, and rules. The content of the subject two test includes: stake test for three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles; stopping and starting on a slope; and passing a single-plank bridge. The content of the subject three safe and civilized driving knowledge test includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and post-accident handling knowledge. Requirements for motorcycle license registration: Applicants must be at least 18 years old and under 60 years old, with physical conditions meeting the corresponding standards.

8

1

Share

Can You Make a U-Turn at an International Signal Left Turn?

National standard traffic signals do not allow U-turns on left turns. Relevant details are as follows: Permitted U-turn situations: When there is a U-turn signal or sign; No U-turn sign but left turns are permitted (no prohibition of U-turn signs); U-turns can be made at dashed lines; U-turns can be made at yellow grid lines; U-turns can be made on the side with dashed lines in green belts. Prohibited U-turn situations: U-turns are prohibited where there are no U-turn signs or no left turn signs: As long as there is a sign prohibiting U-turns, then U-turns cannot be made at that intersection. The action of making a U-turn is an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, then U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns cannot be made on crosswalks. If at an intersection where U-turns are permitted, you must cross the crosswalk before making the U-turn; you cannot make the U-turn on the crosswalk. U-turns are prohibited when there is no left turn lane: Even if you are in the leftmost lane, if there is no sign permitting left turns, U-turns are not allowed. U-turns are prohibited within the second left turn lane line: When a vehicle is stopped in the second left turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles can only make U-turns in the innermost left turn lane. U-turns are prohibited at solid yellow lines: U-turns cannot be made at solid yellow lines. Even if there is a sign permitting U-turns, you must wait for the green light to turn on and cross the stop line to make the U-turn. Precautions for U-turns: When making a U-turn, you should turn on the left turn signal in advance, the maximum driving speed must not exceed 30 kilometers per hour, and you must not hinder other vehicles and pedestrians driving normally.

11

1

Share

How to Unbind Someone Else's Binding to a Motor Vehicle?

Binding a driver's license to a vehicle can facilitate the handling of traffic violation penalties. If you wish to unbind the driver's license, you can follow the methods below to remove the binding. You can download the mobile app "Traffic Management 12123" from the app store. Open "Traffic Management 12123" and log in directly if you have previously registered; if not, you will need to register. After opening, you will see the previously bound motor vehicle and driver's license. Click on "Driver's License" to display the specific details of the license. Click the icon in the upper right corner to display the "Unbind Driver's License" option, then click to remove the binding. If the binding was done on a specific platform, report it to that platform and ask customer service to help unbind the license plate. Then, rebind your license plate to your own account to prevent it from being bound by someone else again. If there is no customer service available, you can file a complaint or report the platform to the relevant authorities. There are two methods to bind a vehicle: Self-service binding process: Download the "Traffic Management 12123" mobile app, register and bind it with real-name authentication on your phone, and follow the prompts step by step. Vehicle owners or drivers can directly apply for binding at the nearest vehicle management internet service window. Both the vehicle owner and the driver must bring their original ID card and the original vehicle registration certificate of the vehicle to be bound. The window staff will strictly follow the procedures to complete the binding. A successful binding confirmation message from "Traffic Police" will be received within one working day after the review is completed.

1

2

Share

What is the displacement of the Lifan Xuanlang?

Lifan Xuanlang is equipped with three engines: a 1.8L naturally aspirated engine, a 2.0L naturally aspirated engine, and a 1.5L turbocharged engine. Therefore, the displacements of this car are 1.8L, 2.0L, and 1.5L. Below are the relevant details: 1. The 2.0L naturally aspirated engine of the Lifan Xuanlang delivers 141 horsepower and a maximum torque of 185 Nm. This engine can output maximum power at 6000 rpm and maximum torque between 4200 and 4400 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This engine is paired with either a 5-speed manual transmission or a CVT. 2. The 1.8L naturally aspirated engine produces 133 horsepower and a maximum torque of 168 Nm. It reaches maximum power at 6000 rpm and maximum torque between 4200 and 4400 rpm. This engine also employs multi-point fuel injection technology and uses an aluminum cylinder head and block. It is matched with a 5-speed manual transmission. 3. The 1.5L turbocharged engine generates 141 horsepower and a maximum torque of 234 Nm. It achieves maximum power at 4580 rpm and maximum torque between 1750 and 3500 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 5-speed manual transmission or an 8AT.

18

3

Share

What is the Hazard Warning Flasher Called?

The hazard warning flasher is officially called the 'hazard warning signal light,' commonly referred to as the 'double flasher.' It is a signal light on a vehicle, primarily used to alert other vehicles and pedestrians that the vehicle is experiencing a special situation, prompting them to yield in time. When to use the hazard warning flasher: When the vehicle breaks down: If the vehicle encounters a malfunction while driving and cannot be moved to a safe area promptly, the hazard warning flasher should be activated immediately to alert passing vehicles and pedestrians for safety. Additionally, call for help and wait for assistance. Breakdown on the highway: If the vehicle breaks down on the highway, it should be parked in the emergency stopping lane, and the hazard warning flasher should be turned on immediately. Place a warning sign 150 meters behind the vehicle and call for help promptly. The driver and passengers should wait outside the guardrail in front of the vehicle. Towing a malfunctioning vehicle: When towing a malfunctioning vehicle, both the towing vehicle and the towed vehicle should activate the hazard warning flasher simultaneously to alert passing vehicles and pedestrians, especially those behind, to avoid sudden lane changes or insufficient safety distance, which could lead to dangerous situations. Sudden heavy rain while driving: In case of sudden heavy rain during the day or night, when visibility is extremely low and stopping is not an option, the hazard warning flasher should be turned on immediately to alert others for safety. Transporting critically ill patients: When rushing to transport a critically ill patient, turn on the headlights along with the hazard warning flasher, honk appropriately, and display clear external markings to alert others for safety. Emergency brake failure while driving: If the vehicle experiences brake failure while driving and cannot stop promptly, turn on the headlights and hazard warning flasher, honk continuously, and take necessary measures such as downshifting or other safety precautions. Temporary parking on the road: When temporarily parked on the road, especially in non-motorized lanes or borrowed lanes, activate the hazard warning flasher immediately to alert others. The driver should not leave the vehicle casually. Vehicle involved in an accident: If the vehicle is involved in an accident, activate the hazard warning flasher immediately, alert others, and call for help or wait for further handling. Other situations: When the vehicle is reversing or making a U-turn; when a training vehicle is practicing; when performing or assigned special tasks; special circumstances on the highway.

3

0

Share

What is the fuel tank capacity of the Camry in liters?

The Camry has a total of 10 models currently on sale. Among them, the hybrid versions including the 2.5HQ Flagship, 5HGVP Leading, 2.5HS Sport, and 2.5HG Luxury models have a fuel tank capacity of 49 liters, while the remaining models have a 60-liter fuel tank. This data is officially released, and Camry owners can also check it on their vehicle's configuration sheet. The Camry uses 92-octane fuel. The hybrid versions (2.5HQ Flagship, 5HGVP Leading, 2.5HS Sport, and 2.5HG Luxury) have a fuel consumption of 4.1L per 100 kilometers, allowing a maximum range of 1,195km on a full tank. The other models have a fuel consumption ranging from 5.5L to 6.0L per 100 kilometers, providing a range of 1,000km to 1,090km on a full tank. During daily driving, it's essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge in the vehicle. Under normal circumstances, the fuel level is accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it's advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel may exceed the marked capacity. This occurs because the manufacturer's specified tank capacity is measured from the tank bottom to the safe fill level, with additional space left between the safe fill level and the tank opening. This extra space accommodates fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the marked tank capacity.

2

1

Share

Can You Turn Left at a Circular Signal Intersection?

How Many Days After Motorcycle Registration Can You Take the Test?

Can You Make a U-Turn at an International Signal Left Turn?

How to Unbind Someone Else's Binding to a Motor Vehicle?

What is the displacement of the Lifan Xuanlang?

What is the Hazard Warning Flasher Called?

What is the fuel tank capacity of the Camry in liters?

What are the differences between the standard version and the touring version of the Mengzhe?

How to Adjust the Carburetor for Fuel Efficiency?

How many years can the battery of a Classic Sylphy last?

How often should the spark plugs of Audi Q2L be replaced?