Can You Take the B1 Driver's License Test Directly?

1 Answers
DiJaxson
07/29/25 9:52pm
b1 driver's license cannot be obtained directly, as it is a medium-sized passenger vehicle license that must be acquired through an upgrade. According to Article 15 of the Regulations on the Application and Use of Motor Vehicle Driver's Licenses: If you already hold a motor vehicle driver's license and wish to add a permitted vehicle type, you must not have a record of 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying. The conditions for upgrading to a B1 license are: 1. You must have held a C1 driver's license for at least three years; 2. You must be between 21 and 50 years old; 3. Your naked or corrected vision must reach 5.0 or above on the logarithmic visual acuity chart; 4. The application for upgrading to a B1 license can only be processed at the vehicle management office in the driver's registered residence, not at temporary residence locations.
Was this review help?
4
4
Share
More Forum Discussions

How to Check the Production Date of Truck Tires?

Truck tire production dates are located in a small square on the sidewall of the tire, which can be seen by turning the truck tire to the left. Here are specific details about truck tires: 1. Tire Date Meaning: Standard tires will have the production date marked on the sidewall, consisting of four digits. The last two digits represent the year, and the first two digits represent the week number. 2. Tire Code Rules: According to international standards, the tire code is composed of the tire width, the percentage of the tire section height and aspect ratio, the tire type code, the rim diameter, the load index, and the permissible speed code. 3. Tire Management: Tires have storage inventory and should not be stored for more than 3 years from the production date.
16
4
Share

What are the functions of engine sensors?

There are many sensors on the engine, each with different functions, including air flow sensors, intake pressure sensors, intake temperature sensors, etc. Here is the relevant introduction of each sensor: 1. Air flow sensor: Its function is to measure the air flow entering the engine, installed on the air bypass channel. 2. Intake pressure sensor: It detects the negative pressure changes in the intake manifold to sense the amount of air intake by the engine, installed on the intake manifold. 3. Intake temperature sensor: When the engine is running, the mass of air entering the engine is related to the intake temperature and atmospheric pressure. When the intake temperature is low, the air density is higher, and the mass of the same volume of air is greater. Conversely, when the intake temperature is high, the mass of the same volume of air is smaller.
12
0
Share

What does the Audi fault code p218800 mean?

Audi fault code p218800 indicates that the system is too rich at idle; below is relevant information about fault code p218800: 1. Solution: It is necessary to go to a 4S dealership for specialized instrument detection and repair to clear the fault code; 2. Causes: Leakage in the intake pipe from the turbocharger to the throttle, including faults in the air flow sensor, turbo pressure sensor, mechanical failure of the turbocharger, or wiring faults in the air flow meter or turbo pressure sensor; 3. Manifestations: Poor working performance of related sensors, such as the oxygen sensor, coolant temperature sensor, intake air temperature sensor, throttle position sensor, air flow meter, or intake manifold pressure sensor.
4
4
Share

What is the fuel consumption of the GL8?

The fuel consumption of the Buick GL8 is 7.9L/100km. Below are the specific details about the Buick GL8: 1. Vehicle Positioning: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. 2. Powertrain: This vehicle is equipped with a 2.0T SIDI direct-injection turbocharged engine, which delivers a maximum power of 191 kW and a maximum torque of 350 Nm. The engine is paired with a 6-speed automatic transmission. During operation, the engine reaches its maximum power output at 5,400 rpm and its maximum torque output between 2,000 and 5,000 rpm.
8
2
Share

Is the NK250 fuel-efficient?

This motorcycle has a fuel consumption of 2.8 liters per 100 kilometers. Here is some relevant information about the NK250: 1. Appearance: As a sporty street bike, the CFMoto 250NK features an overall design that is both simple and elegant, stylish yet understated. This visual appeal is something many domestic brand models in the same price range lack. Of course, one might say the NK250 looks quite lean, but as a sporty street bike, it should appear more compact. 2. Frame: The most commendable aspect of the CFMoto 250NK is undoubtedly the tuning of its frame. The tubular steel frame used in this model performs exceptionally well during actual rides, providing flexible and effortless handling. This performance is also outstanding among domestic brand models.
16
5
Share

What are the symptoms of insufficient clutch fluid?

When the clutch is low on fluid, it may cause the clutch disc to not fully disengage after pressing the clutch pedal. Here are some key points about the clutch: 1. Clutch location: The clutch is located between the engine and the transmission, and its function is to connect or disconnect the engine from the transmission. The clutch pressure plate is fixed to the engine flywheel, with the clutch disc positioned between the pressure plate and the flywheel. The clutch disc has a spline in the center, which secures a drive shaft that serves as the power input shaft for the transmission. 2. Symptoms of insufficient clutch fluid: If the clutch is low on fluid, the clutch may not completely disengage when the pedal is fully depressed, leading to difficulty or inability to shift gears, as well as accelerated wear of the clutch disc.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.