···
Log in / Register

Can You Take Subject Four After Passing Subject Two?

6Answers
PenelopeFitz
09/08/2025, 03:13:58 AM

You cannot take Subject Four after passing Subject Two. Here is the relevant information: Subject Two: Subject Two, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test. For the C1 license, the test items include five mandatory components: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as the S-curve). In some regions, there is an additional sixth item: highway toll card collection. For the C2 license, the test includes four mandatory components: reverse parking, parallel parking, right-angle turns, and curve driving (commonly known as the S-curve). Subject Four: Subject Four, also known as the theoretical test for Subject Four or the driver's theory test, is part of the motor vehicle driver's license examination. After the implementation of the "Ministry of Public Security of the People's Republic of China Order No. 139," Subject Three was divided into two parts: the road test and an additional safety and civilized driving knowledge test, commonly referred to as "Subject Four," which assesses "driving ethics."

Was this review help?
101
Share
LeTucker
09/20/2025, 01:44:31 AM

After passing Subject Two, I was so excited and wondered if I could skip directly to Subject Four to save time. However, when I asked the coach at the driving school, they said it wasn't possible—I had to complete Subject Three first. Subject Three is an on-road test that evaluates your practical driving skills, such as lane changing and yielding to pedestrians. Only after passing it are you eligible to take Subject Four, which focuses on safe driving and traffic regulations. These knowledge points are best learned through practical experience. I remember a friend who was eager to skip Subject Three but ended up failing to register and was warned about the risks. They were advised to prepare early by practicing Subject Three simulations and gaining more real-road driving experience, which would make the actual test much smoother.

Was this review help?
8
Share
Expand All
OMaximus
11/03/2025, 01:05:50 AM

After passing Subject 2, you must proceed to take Subject 3 as per the examination process regulations. Subject 3 tests real driving skills to ensure you can drive safely on the road before moving on to Subject 4's theoretical test. If you skip Subject 3 and go straight to Subject 4, the system review will fail, and all your efforts will be in vain. I think this arrangement is quite reasonable—learning to drive should be step-by-step to prevent theoretical knowledge from becoming empty talk. It's advisable to practice more road test content after passing Subject 2, such as lane changes and parking. After passing Subject 3, you can schedule the Subject 4 test within a few days and complete it effortlessly.

Was this review help?
1
Share
Expand All
CorbinLee
12/17/2025, 01:05:55 AM

I've been through this process. After passing Subject Two, you can't directly take Subject Four; you must first pass Subject Three. Subject Three tests actual driving skills on the street, while Subject Four teaches safety and civilized driving details. This sequence ensures that beginners master everything from basics to applications and then to rules. Not following the procedure will only waste time. Completing Subject Three practice early is the shortcut to avoid procrastination.

Was this review help?
14
Share
Expand All
DeHayden
02/06/2026, 01:56:28 AM

The driving test has a clear sequence: first study the rules and take Subject One, followed by Subject Two (field test), then Subject Three (actual driving), and finally Subject Four (theoretical test). After passing Subject Two, you should immediately schedule Subject Three. Once passed, you can arrange the Subject Four test. I recommend practicing more while the knowledge is fresh to improve safety awareness and reflexes. Don’t try to skip steps, as it might backfire.

Was this review help?
11
Share
Expand All
LeKai
05/01/2026, 05:36:46 PM

After passing Subject Two last time, I was planning how to get my driver's license quickly, but I found out that I must take Subject Three first. Subject Three is the road test section, which checks if you can drive reliably on the road. After passing it, Subject Four (safety knowledge) becomes much easier. This design ensures that drivers gain practical experience before theory, making learning more solid. Remember to do more simulation practice for Subject Three to minimize mistakes and avoid delays.

Was this review help?
16
Share
Expand All
More Q&A

Where is the fuel tank cap switch for the Audi A4?

The fuel tank cap switch for the Audi A4 is located on the fuel tank itself, featuring a push-to-open mechanism. When the car is unlocked, simply press the fuel tank cap to open it. There are several methods to open a car's fuel tank cap: mechanical key opening, in-car switch operation, and push-to-open mechanism. The Audi A4 is a mid-size sedan with dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, with a wheelbase of 2908mm and a fuel tank capacity of 56 liters. It is equipped with a 2.0-liter turbocharged engine, delivering a maximum horsepower of 150 HP, a maximum power output of 110 kW, and a peak torque of 270 Nm.
114
Share

How to open the trunk from inside the Malibu?

To open the trunk from inside the Malibu, follow these steps: 1. Locate the trunk switch in the lower left corner of the driver's compartment, pull the switch upward to open the trunk; 2. Alternatively, press the button on the car's remote key to open the trunk. The Malibu XL is a midsize 4-door, 5-seat sedan with body dimensions of 4933mm in length, 1854mm in width, 1472mm in height, and a wheelbase of 2829mm. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
110
Share

How to Remove the Main Airbag in a Passat?

The method for removing the main airbag in a Passat: 1. Disconnect the negative terminal of the battery; 2. Remove the combination switch cover; 3. Insert a thin screwdriver into the two small holes on the back of the steering wheel; 4. Push the retaining spring toward the center of the steering wheel to release it. The Passat is a mid-size sedan. Taking the 2020 Passat Business Edition as an example, its body dimensions are: length 4933 mm, width 1836 mm, height 1469 mm, with a wheelbase of 2871 mm. The 2020 Passat Business Edition is equipped with a 1.4-liter inline 4-cylinder turbocharged engine, with a maximum power of 110 kW, reaching maximum power at 5000 rpm, and the maximum torque is achieved between 1750 to 3000 rpm.
102
Share

How to Open the Accord Hood?

To open the hood of the Accord: Press the hood release switch to automatically open it. The switch is located near the A-pillar on the right side of the driver's door. The Accord is a midsize sedan under Honda. Taking the 2021 Accord Starry Sky Limited Edition as an example, its body dimensions are: 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm and a fuel tank capacity of 56 liters. The 2021 Accord Starry Sky Limited Edition is equipped with a 1.5L inline 4-cylinder turbocharged engine, delivering a maximum torque of 260 N·m at 1600-5000 rpm and a maximum power at 5500 rpm.
117
Share

What Causes the Car to Shake While Driving?

Reasons for feeling the car shake while driving: 1. Dirty throttle body or severe carbon buildup on engine fuel injectors; 2. Issues with spark plugs, high-voltage wires, or ignition coils; 3. Deep scratches or grooves on brake discs; 4. Abnormal fuel supply pressure from the fuel pump; 5. Incorrect readings or malfunction of the intake pressure sensor; 6. Aging engine components. Solutions for car shaking while driving: 1. Clean the fuel system and check the idle speed control valve for carbon buildup, clean if necessary; 2. Inspect or replace spark plugs; 3. Replace brake discs promptly; 4. Check fuel pressure and replace faulty components; 5. Inspect the engine to identify problematic parts; 6. Clean the fuel filter.
107
Share

How to add windshield washer fluid to the Sagitar?

The method for adding windshield washer fluid to the Sagitar is as follows: 1. Use the wiper control knob to spray the washer fluid from below the windshield; 2. Continue until the spray nozzles stop spraying, then open the washer fluid filler cap and add a small amount of washer fluid solution; 3. Activate the wiper control knob to clear out any remaining old washer fluid; 4. When no more old fluid sprays from the nozzles, refill with new washer fluid (approximately 4L), then securely close the cap. The Sagitar is a compact car produced by FAW-Volkswagen, with dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. It is equipped with either a 1.2T or 1.4T turbocharged engine, paired with a 5-speed manual or 7-speed dual-clutch transmission.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.