Can You Stop on the Emergency Lane to Change Drivers?

1 Answers
TeaganLee
07/29/25 3:06pm
It is not allowed to stop on the emergency lane to change drivers, but in case of emergencies such as the driver feeling unwell, a brief stop for a quick driver change is permissible. However, the hazard lights must be turned on, and the operation should comply with regulations, avoiding prolonged stops. Below are relevant details: Introduction: The emergency lane is a lifeline, and general social vehicles are not permitted to occupy it. However, in the event of vehicle malfunction or unresolvable issues, temporary stops on the emergency lane are allowed to request assistance, provided personal safety is ensured. Therefore, changing drivers on the emergency lane is generally not permitted; it should be done at service areas. Activate Hazard Lights: In cases where the driver suddenly feels unwell or encounters an unexpected situation, a temporary stop is allowed. The hazard lights must be turned on, and the situation should be handled quickly. If it is nighttime, the width marker lights and rear lights should also be activated to alert approaching vehicles.
Was this review help?
10
1
Share
More Forum Discussions

How to Check Used Car Maintenance Records?

To verify the owner's identity as required, generally providing the ID number and vehicle identification number (VIN) will allow for checking. Car owners who have had repairs or maintenance done at independent repair shops know that many shops still provide paper maintenance receipts after servicing or maintenance is completed.
10
3
Share

How to Unclog a Blocked Engine Compartment Drain Hole?

The engine compartment is very close to the air conditioning intake. In the stuffy compartment, bacteria can easily breed, and in severe cases, water may flow into the car through the air conditioning intake, causing floor water accumulation. When cleaning the door drain holes, you can use hard objects such as iron wire to unclog them.
13
5
Share

Should the Car Air Conditioner Use Internal or External Circulation in Winter?

Car air conditioner internal circulation refers to the recirculation of air inside the vehicle, which allows the interior temperature to rise more quickly. However, this can lead to a decrease in air quality. External circulation, on the other hand, draws in fresh air from outside the vehicle, resulting in a slower rise in interior temperature. In winter, it is recommended to first use internal circulation to warm up the car and then switch to external circulation once the engine has warmed up. Here are some important considerations for using the car air conditioner: 1. Do not forget to press the A/C button. This button controls the air conditioning compressor. Many drivers are not familiar with it, but simply turning on the air conditioner without activating the compressor will not cool the car, even if the temperature is set to the lowest. 2. Pay attention to switching between internal and external circulation. If external circulation is left on continuously, hot air from outside will keep entering the car, forcing the air conditioner to work harder to maintain a cool temperature, leading to excessive energy consumption. Especially in areas with heavy air pollution, avoid using external circulation as it will bring polluted air into the car. On the other hand, continuous use of internal circulation, while energy-efficient, can reduce oxygen levels inside the car, causing drowsiness and affecting driver safety. Therefore, to balance energy efficiency and passenger health, make good use of the internal and external circulation switch. 3. Utilize the defogging mode of the air conditioner. During heavy rain, fog can form on the windshield, and many drivers may not know how to handle it except by wiping it with tissues. The defogging mode of the air conditioner can quickly resolve this issue by simply turning it on. When turning off the air conditioner, it is also important to note that after pressing the A/C button, the cold air from the air conditioner can condense moisture inside the car into water droplets, which may remain in the evaporator. If not addressed promptly, this can lead to bacterial growth and mold. To prevent this, remember to turn off the A/C button before shutting down the car, allowing the air conditioner to operate in ventilation mode to dry the moisture. 4. Replace the air filter regularly. The air filter is responsible for purifying outside air before it enters the car. If the filter is not replaced for a long time, it can lead to reduced cooling efficiency and unpleasant odors inside the car. Over time, the filter accumulates dust and debris, reducing airflow and cooling performance. Additionally, this can promote bacterial growth, resulting in foul-smelling air being blown into the car.
6
5
Share

What is the tire pressure for summer tires?

Summer tire pressure should be maintained between 2.4 to 2.5 bar. When inflating tires in summer, vehicle owners should use a pressure gauge to check the air pressure to prevent overinflation, which may cause tire blowouts. Hazards of excessive tire pressure: 1. Reduces tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates wear on the central tread pattern, shortening tire lifespan. Automotive tires are one of the key components of a vehicle, directly contacting the road surface and working with the suspension system to absorb shocks during driving, ensuring good ride comfort and smooth operation.
14
5
Share

What is the PTC function of Chery Ant?

Chery Ant's PTC function refers to the DC PTC heater in electric vehicles, which is a type of ceramic heater. Introduction to PTC: PTC stands for Positive Temperature Coefficient, indicating a large positive temperature coefficient, generally referring to semiconductor materials or components with significant positive temperature coefficients. Commonly mentioned PTC refers to Positive Temperature Coefficient Thermistors, abbreviated as PTC thermistors. Function of PTC: PPTC devices, or Polymer Positive Temperature Coefficient devices, can protect circuits when there is excessive current surge or high temperature.
1
0
Share

What car brand has the three M logo?

Three M is the logo of Maybach. Here are detailed introductions about Maybach: 1. Overview: Maybach is a luxury car brand under Mercedes-Benz. Maybach is an automobile brand. Maybach (German: Maybach) and Maybach-Motorenbau-GmbH were once active in Europe from 1921 to 1940 as a German ultra-luxury automobile brand and manufacturer. 2. Logo design concept: The legendary brand logo consists of two crossed M's enclosed in a spherical triangle. At the beginning of the brand's creation, the two M's represented the abbreviation of maybach-motorenbau, while now the two M's stand for the abbreviation of maybach-manufaktur.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.