Can You Stop Midway During Parallel Parking?

Can I switch back to 92 after using 95?

92 and 95 gasoline cannot be mixed. If you accidentally use the wrong gasoline grade occasionally, simply switch back to the correct grade after using it up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended for low-grade gasoline, using high-grade gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed ignition in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance in practice. For vehicles recommended for high-grade gasoline, using low-grade gasoline can cause engine knocking. Because the octane value is much lower, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstable. If the knocking is imperceptible, it only increases noise without significant damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. Besides checking the appropriate gasoline grade in the car's manual, you can also find it on the fuel tank cap, which usually indicates the recommended grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92 gasoline, while those with a compression ratio between 10.0-11.5 should use 95 gasoline. However, with the use of new technologies, the compression ratio alone cannot determine the gasoline grade. High compression ratio engines can still be tuned to use low-grade gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane value, and the better the anti-knock performance. 92 gasoline contains 92% isooctane and 8% n-heptane, while 95 gasoline contains 95% isooctane and 5% n-heptane.

13

2

Share

What is Crawl Control Mode?

The full name of Crawl Control Mode is Low-Speed Cruise Driving Assist System, also known as the foolproof off-road system. It ensures that excessive vehicle speed does not cause wheel slippage. After activating Crawl Control Mode, the vehicle can autonomously control engine torque output, the transmission system, and brakes, allowing the car to traverse rough terrain at an extremely slow speed. The driver only needs to steer the wheel without operating the throttle or brakes. The vehicle's onboard computer can intervene, autonomously controlling the car. Based on feedback from road conditions, it distributes braking force to all four wheels via the electronic system, adjusts torque output, and ultimately prevents wheel slippage, ensuring stable driving. Cruise control systems mainly consist of a control switch, control module (cruise computer), and servo (actuator). The cruise control module reads pulse signals from the speed sensor and compares them with the set speed to adjust the throttle opening, maintaining the preset speed. For example, when climbing a hill, if the vehicle speed drops, the pulse signal from the speed sensor decreases, and the control module instructs the servo actuator to open the throttle at an appropriate angle to maintain speed. Conversely, when descending, the throttle opening is reduced. Common questions about Crawl Control Mode: The manual knob increases crawl speed from left to right in five levels. Low speed is suitable for rocky terrain, uneven surfaces (downhill), and gravel roads (downhill). Low-medium and medium speeds are suitable for uneven surfaces (uphill). Medium-high and high speeds are suitable for snowy conditions, muddy roads, gravel roads (uphill), sandy terrain, extremely muddy surfaces, uneven surfaces (uphill), and grassy areas. During Crawl Control Mode operation, if the gear is shifted to P or N, the 4WD switch is in H4, or a car door is opened, the mode will automatically deactivate, and the dashboard indicator will flash before turning off. Crawl Control Mode cannot operate continuously for extended periods; otherwise, it will automatically deactivate. Park the vehicle on safe ground and wait for the system to cool down before resuming normal use.

13

2

Share

What is the engine displacement of the Ford Mustang?

The maximum engine displacement of the Ford Mustang is 5.0 liters. Here is a related introduction to the Ford Mustang GT version: 1. Exterior design. The new generation Mustang retains the classic American muscle car feel with features like the "shark mouth" style front grille and tri-bar taillights, while the overall body lines are noticeably more dynamic and stylish compared to the current model. 2. Interior design. The new generation Mustang features more leather materials and chrome trim, making it significantly more luxurious and refined than the current model. Additionally, the car comes standard with the SYNC infotainment system supporting MyFord-Touch functionality, which can be operated via the touchscreen on the center console, further enhancing the technological feel.

12

2

Share

What are the methods for checking the timing marks of the Jinbei CG14?

Turn the intake and exhaust camshafts to the horizontal position, and fix the crankshaft pulley to the front cover to complete the timing. Here are the specific details: Precautions: Engine electrical timing refers to the coordination between ignition timing, fuel injection timing, and cylinder pressure. Ignition timing and fuel injection timing must be within the specified range. If the timing is too early or too late, it indicates an error in the engine's electrical timing. Additional Information: To calibrate the mechanical timing of certain engine models, a dial indicator is required to confirm the piston's top dead center. Whether it's an error in the engine's mechanical timing or electrical timing, both can result in the engine failing to start or running unevenly.

17

5

Share

How much fuel does a large truck consume when idling with the air conditioning on for one hour?

Truck idling with the air conditioning on for one hour consumes approximately 2 liters of fuel. Idling with the air conditioning on while stationary: Keeping the engine idling with the air conditioning on after parking is very fuel-consuming because the compressor relies on the engine's idle operation, which can lead to incomplete fuel combustion and the formation of carbon deposits. Production of toxic substances: Incompletely burned fuel produces toxic substances such as carbon monoxide. If the car windows and doors remain closed for a long time, these exhaust gases can enter the sealed cabin. Accumulating to a certain level can cause carbon monoxide poisoning. Idling with the air conditioning on emits more harmful exhaust gases than driving with the air conditioning on. The idle condition produces relatively higher levels of harmful gases such as carbon monoxide, hydrocarbons, and nitrogen oxides.

9

5

Share

Where is the tire tread pattern model written?

Tire tread pattern models are written on the sidewall of the tire. Generally speaking, the tread pattern refers to the various longitudinal, transverse, and diagonal grooves on the tire's tread surface. There are three basic types of tire tread patterns: longitudinal, transverse, and mixed. Longitudinal patterns have strong drainage capabilities and help dissipate heat from the tire, but they lack sufficient grip. Transverse patterns have high lateral stiffness, providing strong grip, but their drainage and directional performance are poor. Mixed patterns combine the advantages of both longitudinal and transverse patterns, offering good grip and drainage performance, making them suitable for both dry and wet road conditions with fewer usage restrictions. The design functions of tire tread patterns include the following aspects: 1. Enhancing the vehicle's braking force, driving force, and traction, improving handling and stability; 2. Increasing the friction between the tire and the ground, preventing skidding and side slipping during braking; 3. Dissipating heat from the tire.

7

0

Share

Can You Stop Midway During Parallel Parking?

Can I switch back to 92 after using 95?

What is Crawl Control Mode?

What is the engine displacement of the Ford Mustang?

What are the methods for checking the timing marks of the Jinbei CG14?

How much fuel does a large truck consume when idling with the air conditioning on for one hour?

Where is the tire tread pattern model written?

What Causes Abnormal Noises in the Air Conditioning System?

How Often Should Vehicle Seals Be Replaced?

What is the renewal cycle for a driver's license?

ETC Installation Tutorial