Can You Stop During Straight-Line Driving in Subject 3?

3 Answers
DelAriel
07/23/25 9:39pm
You cannot stop during straight-line driving in Subject 3. The reasons and exam content are as follows: No stopping during straight-line driving: Naturally, you cannot stop during straight-line driving. Once the system announces the start of straight-line driving, stopping will result in failure. Therefore, before starting straight-line driving, ensure there are no obstacles ahead and maintain a distance of at least 100 meters from the vehicle in front. Only after the system announces the end of straight-line driving can you stop and perform other actions. Subject 3 exam content: The road driving skills test for Subject 3 generally includes: vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, going straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and night driving. The safety and civilized driving knowledge test generally includes: safety and civilized driving operation requirements, safe driving knowledge in adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
Was this review help?
11
5
Share
MacAdriel
08/10/25 5:22pm
During my driving test for Subject 3, the instructor emphasized that absolutely no random stopping is allowed during the straight-line driving section. The examiner wants to see if you can steadily control the vehicle, maintaining both speed and direction without deviation. If you brake and stop midway, unless it's due to special circumstances like a sudden accident ahead, you'll be immediately marked as failing. This isn't just about the rules—it's about developing safe driving habits. Random stopping can easily lead to rear-end collisions or disrupt vehicles behind you, and in the test area, it might trigger the scoring system to deduct major points. I remember a friend who nervously stopped to shift gears during the straight-line section and failed instantly, wasting money on a retake. Actually, during regular practice, you should develop the habit of looking far ahead, holding the steering wheel lightly, and avoiding any unnecessary movements. In short, remembering this rule can significantly increase your pass rate—don't dig your own grave.
Was this review help?
3
3
Share
Expand All
VanWalter
09/23/25 5:18am
Newbie drivers always ask about this, and I learned it the hard way during my Subject 3 test. The straight-line driving section requires maintaining a steady speed throughout—stopping is basically shooting yourself in the foot. With the examiner watching, hitting the brake means instant point deductions since the core test is vehicle control. During my mock practice, I accidentally stopped and got scolded by the instructor: 'Don’t touch the brake unless necessary. Stopping forces a restart, wastes time, and highlights weak skills.' Focus on the road ahead, use throttle adjustments to stabilize speed, and take deep breaths if nervous. Stopping just makes you seem unsure—better to practice the route repeatedly to sync with its rhythm. The test is stressful enough; remembering this detail saves hassle. Safety first, after all.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What parts need to be replaced when a Mercedes-Benz engine gets flooded?

When a Mercedes-Benz engine gets flooded, it generally requires replacement of components such as the cylinder, valve cover gasket, connecting rod, connecting rod bearing, water pump, and piston. Reasons for engine stalling due to water ingress: The high-voltage ignition system becomes damp or short-circuited due to water, causing the engine to stall; the car's exhaust pipe is positioned relatively low, and typically, if the water level rises above the exhaust pipe, the engine will stall due to inability to expel exhaust gases; water entering the intake, specifically at the air filter, can also cause stalling. Effects of water entering the engine: The most direct and severe consequence of water entering the engine is potential total failure. Not only does it affect the vehicle's performance, but it also impacts the driver's experience. When water enters the engine, bacteria can proliferate. Additionally, exposure to sunlight and wind can easily lead to unpleasant odors, affecting the environment.
12
4
Share

What are the precautions for the first maintenance of Baojun 730?

Before the first maintenance, fully understand whether your car has any other faults or problems, and record them. When registering for the first maintenance, inform the 4S shop of these items that need to be checked. Pay attention to the maintenance time: When picking up the car, the staff at the 4S shop will inform the consumer of the first maintenance time and mileage; the vehicle's maintenance manual will also indicate the first maintenance time and mileage, and the first maintenance can be carried out according to the marked information. Pay attention to the oil used for the first maintenance: Since the vehicle is in the running-in period, the parts have not been fully run-in, and impurities may appear during use, affecting the performance of the oil. It is necessary to replace the oil in time during the first maintenance to avoid a decline in oil performance.
2
4
Share

What to Do If It Rains During the Driving Test?

Solutions for taking the driving test in the rain: Maintain a positive mindset and relieve stress. After getting in the car, use a tissue to wipe the rearview mirrors and test the windshield wipers, adjusting the frequency based on the intensity of the rain. Tips for taking the driving test on a rainy day are as follows: 1. Do not close the car windows too tightly, as this can cause fogging inside the car, obstructing visibility and affecting judgment accuracy. 2. Control your speed when driving in the rain, going slightly slower than during regular training. 3. During the test, avoid sudden acceleration or hard braking. Rain makes the road slippery, visibility poor, and increases the risk of wheel skidding. 4. Turn on the windshield wipers promptly when it rains to maintain clear visibility.
3
4
Share

Can 4-Square-Millimeter Copper Wire Be Used for Vehicle Jump-Starting?

4-square-millimeter copper wire can be used for vehicle jump-starting. Below is an introduction to the 4-square-millimeter copper wire: Application Scope of 4-Square-Millimeter Copper Wire: A 4-square-millimeter copper wire can serve as a jump-start cable. Its diameter is approximately 1.27 millimeters. By twisting two strands of 4-square-millimeter copper wire together, the current capacity can be increased. As long as the current is increased and the voltage remains stable, the power output will also increase, meeting the load requirements and ensuring normal operation. Specific Measures for 4-Square-Millimeter Copper Wire: During the actual operation, the protective cover of the battery must be opened to locate the positive terminal. The red end of the wire should be securely connected to the positive terminal of the battery, ensuring a tight clamp. Then, connect the positive terminal to another positive terminal to measure a voltage of 12 volts.
9
5
Share

What are the reasons for the sudden failure of the Citroen C-Quatre's air conditioning to cool?

The reasons for the Citroen C-Quatre's air conditioning not cooling are: 1. Damage to the piston inside the air conditioning system. 2. Damage to the clutch plate. 3. The engine ECU does not instruct the air conditioning to work. 4. The condenser fins in the air conditioning system are too dirty, causing the pressure and temperature in the system to rise too high. To protect the system, the air conditioning pump stops working, resulting in no cooling. Additional information: The cooling principle of car air conditioning is the same as that of household air conditioning. Both use the principle that R12 or R134a expands rapidly when compressed and released, absorbing a large amount of heat. In the cooling system, the low-pressure vapor of the refrigerant is sucked in by the compressor, compressed into high-pressure vapor, and then discharged to the condenser. The indoor air continuously circulates to achieve the purpose of lowering the temperature.
18
0
Share

What does the DiLink system mean?

DiLink is an intelligent connected vehicle system launched by BYD. The following is a detailed introduction to the DiLink system: 1. DiUI: BYD DiLink fully considers common functions and user personalization, deeply designing various aspects including the main desktop, weather, intelligent voice, air conditioning, Bluetooth calls, imaging, quick access bar, and built-in application interfaces from the dimensions of visual interface and operation logic. Browsing information becomes more intelligent and efficient, ensuring user driving safety. 2. Di Ecosystem: A super ecosystem chain built based on BYD DiLink intelligent connected vehicle system, integrating a multi-dimensional ecosystem including a vast number of automotive APP ecosystems, intelligent voice ecosystems, music car ecosystems, and gaming car ecosystems. 3. Di Cloud: BYD's cloud service Di Cloud is built on mobile internet, vehicle networking, big data, and AI, providing users with comprehensive connected applications through the cloud platform. By installing the BYD Cloud Service APP on their mobile phones, users can achieve various functions such as remote control, vehicle condition monitoring, location viewing, and data applications.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.