···
Log in / Register

Can You Still Practice Driving in the Rain for Subject Two?

4 Answers
MacAustin
07/29/25 11:30am

It is not recommended to practice driving in heavy wind and rain. Below are some safety tips for driving in the rain: Reduce speed appropriately: Wet and slippery roads reduce tire grip, which can lead to loss of control when turning or overtaking. Therefore, it's advisable to lower your speed and minimize lane changes or overtaking maneuvers. Fogging inside the car: Rain significantly affects visibility by blurring the rearview mirrors. Additionally, to prevent rain from entering the car, many people roll up their windows, which can cause the interior to fog up. Loss of vehicle control: Puddles form on the road during rain, and when wheels suddenly enter these puddles, the sudden increase in resistance can easily cause the vehicle to skid or lose control.

Was this review help?
16
3
Share
DeAlexa
08/13/25 7:19pm

I've experienced practicing Subject 2 in the rain many times. Generally, driving schools allow it as rain doesn't mean you can't practice. Wet roads become slippery in the rain, and visibility may be blurred, which actually helps you adapt to various driving conditions in advance. When practicing reverse parking or parallel parking, rainwater may cause the rearview mirrors to fog up or become blurry, requiring you to rely more on the vehicle's safety warning systems and your steering wheel control skills. I suggest ensuring the windshield wipers are working properly before getting in the car, starting slowly, and avoiding sudden braking to prevent skidding. If the rain is too heavy, affecting the instructor's guidance or your concentration, it's better to pause the practice. Practicing in the rain can train your patience and emergency response abilities, which is very helpful for passing the Subject 2 test since the exam isn't weather-dependent. In short, communicate with your instructor in advance, and always prioritize safety as the most cautious choice.

Was this review help?
8
3
Share
Expand All
LandonMarie
10/08/25 4:49am

I was indeed a bit nervous the first time practicing Subject 2 in the rain. The road was slippery, and it felt much harder to control compared to sunny days. But after a few sessions, I found it actually boosted my confidence. The driving instructor often says rainy days are great for practice—they train you to handle unexpected situations, like gently adjusting the steering wheel if the rear wheels skid while reversing. I recommend wearing a lightweight raincoat and turning on the window defogger before practicing. Don’t skip practice just because it’s raining, unless there’s heavy thunder—safety comes first. Driving in the rain is very helpful for passing Subject 2, as it familiarizes you with wiper operation and braking distance control, making you more composed when driving independently later. In short, adjust based on your comfort level, and don’t push yourself too hard.

Was this review help?
18
3
Share
Expand All
DeAngelo
11/21/25 6:08am

Of course, you can practice Subject 2 in the rain, as most driving schools support such conditions. Rain makes the road slightly slippery, so just drive slower. Before practice, check the windshield wipers and keep the windows clean. Pay extra attention to distances when reversing. Practicing in the rain can improve your reaction skills, which is beneficial for the test.

Was this review help?
4
0
Share
Expand All
More Forum Discussions

What Are the Reasons for the Brake Pedal Being Hard to Press and the Car Failing to Start?

The reasons for the brake pedal being hard to press and the car failing to start include a leaking vacuum booster pump or a damaged brake booster pump. Below are the specific explanations: 1. Vacuum Booster Pump Leakage: If the car's vacuum booster pump is leaking or malfunctioning, it should be noted that the force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its power assistance, making it difficult to press down. 2. Brake Booster Pump Damage: Pressing the brake pedal after turning off the engine is also related to the brake booster pump. The brake booster pump only continuously generates vacuum when the engine is running. When the engine is off, it relies solely on the residual vacuum assistance left from previous operations.
4
4
Share

Is Secondary Ignition Harmful to the Car?

Secondary ignition after the car has started can cause significant harm to the vehicle, potentially damaging the starter gear or burning out the starter. Below are specific details regarding secondary ignition in cars: 1. Symptoms: The most obvious sign of secondary ignition is hearing an abnormal "grinding" noise from the engine area. This noise is produced by the starter gear clashing with the flywheel. The flywheel rotates at a much higher speed when the engine is running, far exceeding the starter's speed. Due to this significant speed difference, the starter's drive gear does not re-engage with the flywheel teeth during secondary ignition, thus preventing the starter from being damaged. 2. Hazards: Issues such as starter slippage, severe wear of the starter drive gear, and burnout of the starter coil are directly related to secondary ignition. Additionally, secondary ignition can also cause some wear to the teeth on the flywheel.
9
3
Share

Where is the position to turn off the headlights?

The position to turn off the headlights is located at the lower right side of the vehicle's steering wheel, which is a rotary knob that operates by turning up and down. Here is some related information: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. 2. Car lights: Car lights are divided into low beam, high beam, fog lights, warning lights, indicator lights, width lights, and reverse indicator lights. Generally, car front lights adopt a four-light system, and the main cause of failure in this four-light system car front light is usually the use of excessively high-power bulbs leading to malfunction.
15
2
Share

How to Report the Loss of a Vehicle Registered Under Your Name?

To report the loss of a vehicle registered under your name, follow these steps: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. Below is relevant information about vehicle loss reporting: 1. Method: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. The statutory loss report must be published in a provincial-level publicly circulated newspaper. 2. Required procedures: The documents needed for reissuing a vehicle registration certificate include the "Application Form for Motor Vehicle License Plates and Certificates," the original and a copy of the vehicle owner's identity proof, the motor vehicle inspection record form (processed on-site), and for reissuing the motor vehicle registration certificate, the vehicle owner must bring the vehicle to the vehicle management office.
20
5
Share

Do I need to switch from high beam to low beam when turning off the lights?

No reset is required. Here are the relevant details: 1. First test group: During the Category 3 lighting test, if the high beam is the first lighting signal in the test group, there's no need to reset it. Simply proceed to the next test group and follow the instructions. 2. Final test: If it's the last lighting signal in the test, it's recommended to switch back to low beam after completing the test. During normal testing, there's no need to deliberately check its position. If the lighting signal test begins with the high beam already activated, and the instruction requires switching to high beam, you only need to perform the action of switching to high beam.
14
3
Share

Is the Kodiaq's transmission dry or wet?

Kodiaq uses a wet transmission. The automatic transmission features oil-immersed friction plate clutches, which require the design of a hydraulic coupling or torque converter to work in conjunction with the power flexible connection clutch, making it easy to operate and with a low failure rate. Below is a detailed introduction to the Kodiaq: 1. The Kodiaq is Skoda's first domestically produced mid-size SUV based on the MQB platform. This mid-size SUV made its debut at the 2016 Guangzhou International Auto Show and received widespread attention and praise upon its appearance. The arrival of the Kodiaq broke the awkward situation where Skoda only had one compact SUV, while also providing consumers with a broader range of choices. The performance of the Kodiaq's 7-speed dual-clutch transmission is still considered one of the best in its class, with almost no jerking during low-speed driving, effectively controlling the common issues of dual-clutch transmissions. The gear shifts are crisp and decisive, with upshifts being very proactive during daily driving, keeping the engine speed mostly below 2000 rpm, ensuring better fuel economy. 2. The Kodiaq is equipped with the DQ380 7-speed dual-clutch DSG transmission, which takes into account a large amount of actual Chinese road conditions, providing smooth and jerk-free gear shifts with excellent stability, and optimizes the efficiency of low-speed gear shifting; 7 forward gears with manual and automatic modes, comprehensively upgrading the dual-clutch transmission in terms of power, driving pleasure, and fuel economy. The rapid gear shifting and continuous power improve both power performance and fuel economy; the latest transmission adopts more advanced designs, capable of withstanding a maximum torque of up to 420N·m; the wet dual-clutch form, with continuous circulation of transmission oil, cools and lubricates the dual-clutch module, ensuring more stable performance.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.