Can You Still Drive with Cracked Run-Flat Tires?

1 Answers
DelMia
07/30/25 4:00am
It is recommended not to continue using run-flat tires once they have developed cracks, as this can affect the vehicle's stability to some extent and may lead to loss of control under extreme driving conditions. Therefore, it is essential to replace the tires promptly when such cracks appear. Below is some extended information about run-flat tires: The run-flat tires used in vehicles, also known as air-loss protection tires, differ from standard tires in that they prevent the severe loss of control that can occur when a conventional tire bursts. While a standard tire may lose its supporting force instantly upon bursting, causing an immediate shift in the vehicle's center of gravity, run-flat tires are designed to maintain vehicle stability and ensure the safety of the driver and passengers in such situations.
Was this review help?
19
4
Share
More Forum Discussions

What to Do When the Car Door is Frozen Shut?

When the car lock is frozen, the solutions include: 1. Drive the car to a basement, garage, or other slightly warmer place to park, and the lock will open after a while; 2. Use a lighter to heat the car key, requiring multiple heating sessions, then slowly insert the hot key into the lock to gradually melt the ice inside. However, for keys with chips, avoid overheating them to prevent unnecessary damage; 3. Use a hairdryer to blow hot air directly at the lock cylinder. After continuous blowing for a while, the lock cylinder will thaw. Once the ice melts, immediately clean any water inside the lock cylinder to prevent refreezing; 4. Pour some hot water over the frozen car lock, and the door will thaw shortly. Be sure to clean any water inside the lock cylinder right away to prevent it from freezing again.
18
2
Share

What are the reasons for the sudden increase in fuel consumption of the Qashqai?

After a certain period of use, wear and tear on car components and the accumulation of carbon deposits inside the engine can easily lead to higher fuel consumption. If not addressed in time, this can result in increased fuel costs and potential damage to the vehicle. The sudden increase in fuel consumption of the Qashqai may be due to the following reasons: 1. The air filter is too dirty, reducing the amount of air entering the engine cylinders, leading to insufficient oxygen for combustion and excessive intake vacuum, causing incomplete gasoline combustion. Replacing the air filter can resolve this issue. 2. Excessive carbon deposits on the fuel injectors and throttle body can lead to poor gasoline atomization and incomplete combustion, resulting in higher fuel consumption. Cleaning the carbon deposits will restore fuel consumption to normal levels in the short term. 3. Poor-quality gasoline can form carbon deposits in the combustion chamber or around the valve ports. These deposits cause the engine to inject more fuel during operation, leading to increased fuel consumption. 4. A faulty ignition coil can result in insufficient ignition energy, incomplete combustion, and higher fuel consumption.
3
5
Share

What to Do When the Outside of the Windshield Fogs Up?

When the outside of the windshield fogs up, here are several solutions: 1. Open the windows for air circulation. If the fogging is mild, slightly open both side windows to allow air exchange inside and outside the car. The fog will dissipate when the interior temperature approaches the outside temperature. However, this method is only suitable when the car is moving at low speeds. 2. Lower the fan speed and turn on the external air circulation, then set the airflow to fully blow onto the windshield. This method is slower in defogging and is only suitable for mild fogging. 3. Mix a defogging solution with dish soap and water in a ratio of about 1:10, then apply it to the glass with a cloth. This not only defogs quickly but is also cost-effective. If dish soap is unavailable, windshield washer fluid can also help. 4. If the fog is heavy and neither opening windows nor using wipers works, adjust the air conditioning to warm air, increase the temperature, and direct all airflow to the windshield. The fog will disappear quickly with very noticeable results.
12
4
Share

How to engage the reverse gear on a Haval H6?

For the Haval H6 automatic transmission models, simply shift to the R gear. For manual transmission models, the reverse gear position is located in front of the 1st gear. Carefully observe the gear lever where there is a silver ring sleeve. To engage the reverse gear, you need to lift this sleeve upwards and then push forward to shift into reverse. More details about the Haval H6 are as follows: 1. Exterior: The red badge H6 models are positioned for family users, featuring a more grand and luxurious design style with strong visual impact. The blue badge models target younger demographics, suitable for young couples or singles, with a more sporty, dynamic, and tech-savvy design. 2. Interior: The air vent designs are very avant-garde, aligning well with the preferences of the target consumer groups. The multifunction area also includes voice control buttons. The instrument panel is fully digital, offering three different styles. 3. Powertrain: The main Haval H6 models are equipped with 1.5T high/low power turbocharged engines and a 2.0T turbocharged engine. The low-power version of the 1.5T engine delivers a maximum power of 110kW, while the high-power version reaches up to 124kW. The 2.0T engine can achieve a maximum power of 145kW (197PS).
1
5
Share

Is it normal for the Mercedes GLC to idle at only 600 RPM?

The Mercedes GLC idling at only 600 RPM is not a normal phenomenon. Common causes of low idle speed include: a dirty throttle body, excessive carbon deposits in the cylinders, a faulty idle control valve, poor atomization or clogging of the fuel injectors, changes in oil viscosity, etc. Normal idle speed refers to the minimum stable speed at which the engine operates without load and without needing to perform external work. More information about car idle speed is as follows: 1. Idle speed is an operating condition of a car, referring to the engine running in neutral. The speed of the engine at idle is called the idle speed. The idle speed can be adjusted by changing the size of the throttle, etc. Idle speed means the engine is "working but not performing labor." 2. When the engine is running, if the accelerator pedal is fully released, the engine is in idle condition. When adjusting the idle speed, the speed should not suddenly increase or decrease, as this can cause premature wear to the engine. It is best to have the idle speed adjusted at an automotive repair facility.
4
1
Share

What are the body length, width, and height dimensions of the Volkswagen Lavida?

The body dimensions of the Volkswagen Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, as per official data. The length of the Volkswagen Lavida refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the car. The width refers to the distance between two parallel planes parallel to the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The Volkswagen Lavida offers four engine options: a 1.2T, a 1.4T low-power, a 1.4T high-power, and a 1.6L gasoline engine. The 1.6L engine delivers a maximum power of 81KW and a maximum torque of 155 Nm, paired with a six-speed automatic manual transmission. The 1.2T is matched with a seven-speed dual-clutch transmission, producing a maximum power of 85KW and a maximum torque of 200 Nm. The 1.4T low-power variant is paired with a seven-speed dual-clutch transmission, offering a maximum power of 96KW and a maximum torque of 225 Nm. The 1.4T high-power variant is paired with a dual-clutch transmission, delivering a maximum power of 110KW and a maximum torque of 250 Nm. National regulations stipulate specific dimensions for vehicles. According to the national standard "GB1589-89," the total width of a vehicle excludes side mirrors. The limitation on vehicle width is intended to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data lies in ensuring adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.