···
Log in / Register

Can You Still Drive with Brake System Failure?

4 Answers
GemmaLee
07/29/25 8:35am

You cannot continue driving with brake system failure. If the brake system malfunctions, it will affect driving safety, and you should promptly inspect and repair it. A car's brake system consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. To ensure safe driving, improve the average driving speed, and enhance transportation productivity, dedicated braking mechanisms are installed on various vehicles. This series of specialized devices is collectively referred to as the brake system. The main functions of the brake system are to decelerate or even stop a moving vehicle, maintain a stable speed for a vehicle going downhill, and keep a parked vehicle stationary.

Was this review help?
20
3
Share
McJuliette
08/12/25 6:00am

As a veteran driver with over 30 years of experience, I must advise you not to take any risks. If there's an issue with the braking system, you absolutely cannot continue driving—it's no joke. When I was younger, I once experienced brake failure; fortunately, I was on an empty road and narrowly avoided hitting a tree. It scared me so much my legs went weak. Common problems include insufficient brake fluid, worn brake pads, or clogged brake lines. If you encounter such issues, immediately pull over to a safe spot and don't move the car. Open the hood and check the brake fluid reservoir's level—if it's below the minimum line, that could be the source of the problem. If you're unsure, call a tow truck—don't skimp on those few dollars. An accident not only endangers you but could also harm others. Always inspect the brake components carefully during every maintenance check—it's the baseline for keeping your family safe.

Was this review help?
17
0
Share
Expand All
LaIsabela
10/05/25 7:14am

Dude, if the brakes are broken, what are you still driving for? Pull over and stop immediately. Last time my brake pedal was as soft as cotton, luckily it happened inside the neighborhood. Possible causes could be brake fluid leakage or aging components. Quick self-check: After parking, pop the hood and take a glance at the brake fluid reservoir to see if the level is low. But don't even think about driving it like that! If they fail on the highway, a crash or rollover could happen in seconds. Calling a tow truck is the safest bet—don't sweat the cost. Make a habit of checking brake firmness before driving, and get any abnormalities fixed early to avoid disaster. Don't gamble with your life to save trouble—it's just not worth it.

Was this review help?
4
5
Share
Expand All
DeAva
11/18/25 8:45am

My experience in car repair tells me that you must never drive with a faulty braking system. Common issues include insufficient brake fluid, ruptured brake lines, or worn brake discs. At best, the brakes may feel spongy; at worst, they could fail completely. You should immediately pull over at a safe spot and avoid attempting to drive further. For a quick check: press the brake pedal to see if it rebounds normally and listen for unusual noises. However, DIY repairs are not recommended—professional servicing is the right approach. Safety comes first; don't joke around with dangerous driving.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

Do you need to take photos when registering for a driver's license?

You need to take photos when registering for a driver's license. Here is some extended information about the photo requirements for driver's license registration: 1. Purpose of the photos: The photos are mainly used for the forms filled out during registration, the forms used during the exams, the forms in the driving school's archives, and the photo on the driver's license. Generally, you need to submit around 7-20 photos, depending on local requirements. 2. Photo requirements: The photos should be one-inch, color, with a white background. Hair should not cover the ears or eyebrows, and no jewelry should be worn. If you usually wear glasses, you should also wear them in the photo (except for contact lenses), and wear non-white clothing.
8
4
Share

How to Remove the Rear Headrest of an Audi A6?

The method to remove the rear headrest of an Audi A6: There is a plastic button on the lower side of one of the two headrest support rods. Press the button and pull the headrest upward to remove it. The car headrest is a comfort and safety feature designed to provide cushioning in the event of a rear-end collision, protecting the head from injury as the body moves backward due to inertia. The Audi A6 is equipped with a 2.0T engine, codenamed EA888, with a maximum power of 180 horsepower and a peak torque of 320 Nm, paired with a CVT continuously variable transmission. In terms of suspension, the Audi A6 features a five-link independent front suspension and a trapezoidal-link independent rear suspension, with a front-engine, front-wheel-drive layout.
6
5
Share

How to completely turn off the radio in BMW X1?

Before turning off the engine, press the volume button to turn off the radio first, and then turn off the engine to completely shut down the radio. Here is more information about the BMW X1: 1. Body dimensions: The new BMW X1 has a length, width, and height of 4565mm, 1821mm, and 1620mm respectively, with a wheelbase of 2780mm. 2. Powertrain: The new BMW X1 is equipped with 1.5T and 2.0T engines. The 1.5T model has a maximum power of 103 kW (140 hp) and a maximum torque of 220 Nm, while the 2.0T model has a maximum power of 141 kW (192 hp) and a maximum torque of 280 Nm.
9
3
Share

Where is the problem if a motorcycle has no high voltage electricity?

For an EFI motorcycle without high voltage electricity, the main causes include spark plug, ignition coil, ECU, ignition switch, kill switch or side stand kill switch, damage to sensors related to the ignition system, or open circuits, short circuits, and loose connections in the wiring between these components. Classification of EFI motorcycles: 1. Closed-loop type: The function and role of closed-loop EFI motorcycles are basically the same as those of cars. Closed-loop EFI motorcycles can adjust the fuel injection volume of the injector based on the oxygen content in the muffler, and can also change the intake pressure according to changes in external atmospheric pressure. Most domestic motorcycles seen on the market are open-loop EFI motorcycles. 2. Open-loop type: Open-loop EFI motorcycles have been largely phased out due to their inability to meet high environmental standards.
19
3
Share

Where to Start After Failing the Driving Test Part 3 Midway?

Similar to Part 2 of the driving test, if you fail Part 3, you will restart the second attempt from the beginning. Additional Information: 1. Part 3: Part 3 is the road driving skills test. According to the requirements of the Ministry of Public Security for driver examinations, each candidate has two attempts per appointment. If the first attempt fails, the system will automatically prompt the candidate to pull over for an immediate retest. During the retest, the safety officer will drive the vehicle back to the starting point, and the test will begin anew. 2. Notes: (1) Before shifting gears, ensure the speed is increased or decreased to match the gear, then proceed with the shift. (2) While driving, remember to glance at the speedometer every few seconds to prevent errors caused by speed and gear mismatch.
12
1
Share

Will a Power Bank Explode if Left in a Car During Summer?

High temperatures may cause explosion or spontaneous combustion. Most power banks contain lithium-ion batteries, which are highly prone to explosion when exposed to direct sunlight in a confined car environment where temperatures can exceed 80°C. Therefore, it is strongly advised not to leave power banks in vehicles, especially for extended periods, as this poses significant safety risks. Below is relevant information about power banks: 1. Power Bank Overview: A power bank is a portable device that can directly charge mobile devices and contains its own energy storage unit. The mainstream products on the market are multifunctional power banks, most equipped with standard USB outputs, capable of charging various common digital products such as smartphones, MP3/MP4 players, PDAs, PSPs, Bluetooth headsets, and digital cameras. Essentially, a power bank is a convenient, portable, high-capacity power source that integrates energy storage, voltage boosting, and charging management. 2. Power Bank Functions: With its built-in charging plug, a power bank can charge mobile devices directly from an AC power source while storing electricity. It combines the features of a charger and a backup battery, eliminating the need for a separate charging plug compared to backup power sources, and providing stored power for digital devices when no direct power source is available or during travel.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.