Can You Still Drive with an Engine Control System Malfunction?

1 Answers
DeKhloe
07/30/25 3:22am
You can continue driving with an engine control system malfunction. Vehicles are designed with emergency measures for the engine system. If the warning light is on, you can still drive, but you should avoid high speeds. Over time, emission control may not function properly, and fuel economy may decrease, but this has little impact on the control system. As long as you drive slowly, there should be no major issues. Here is additional information: Exhaust Gas Recirculation (EGR): The exhaust gases from an internal combustion engine after combustion contain very low or no oxygen. When these gases mix with the intake air, they reduce the oxygen concentration in the intake air, leading to the following effects: Lower Temperature: The lower oxygen content compared to atmospheric air results in lower combustion (peak) temperatures, which helps suppress the formation of nitrogen oxides (NOx). When combustion temperatures decrease, heat transfer to the cylinder and combustion chamber walls, as well as the piston surface, is reduced. Additionally, losses due to thermal dissociation are slightly minimized. Fuel Engines: In fuel engines operating under partial load and without EGR, the throttle must open wider to provide the same amount of oxygen (to achieve the same output). This results in lower intake pumping (throttle) losses during air intake, improving fuel economy.
Was this review help?
19
0
Share
More Forum Discussions

What is the sequence of clutch and brake for hill start parking?

For hill start parking, press the brake first and then the clutch. Upon hearing the instruction: Turn on the right turn signal, steer the wheel appropriately to the right, allowing the vehicle to move slowly and straight along the right side of the road, while paying attention to the distance between the vehicle body and the right sideline. Approaching the target: When the vehicle is about 10 meters away from the parking pole, approach the designated target slowly, accurately, and steadily. Determining the target: Use a point on the parking pole and the windshield (or hood) as a reference. When visually aligning a point on the windshield with the parking pole, indicating that the vehicle's bumper is aligned with the parking pole line, stop immediately.
11
0
Share

What are the symptoms of a stuck throttle cable?

Introduction to the symptoms of a stuck throttle cable: 1. Throttle cable failure modes include sticking, breaking, wear, and damage, with sticking and breaking being the most common; 2. The throttle cable is too long: the curvature radius of the throttle cable path is too small, with too many turns, causing the cable to move poorly and stick; 3. The grease in the throttle cable's steel wire rope has dried up, increasing the pulling resistance: the throttle cable's dust cover has poor sealing, allowing dust, mud, and other debris to enter the protective tube, hindering the normal movement of the cable. Additional information: The main causes of throttle cable wear failure are improper fixation points, lack of fixation points, or detachment of fixation points, leading to friction between the throttle cable and other components; the breaking failure of the throttle cable is mainly related to its installation method, typically manifesting as bending fatigue before breaking.
8
3
Share

Is it normal for the Buick Excelle display screen not to show the interface?

It is not normal for the Buick Excelle display screen not to show the interface, and it requires timely inspection and repair. The following is a detailed introduction about the Buick Excelle: 1. Overview: The Excelle adheres to Buick's "dynamic and smooth" design language, drawing inspiration from the classic elements of the Riviera concept car. Its body styling is full of sportiness without losing stability, presenting a new Excelle with a grand, simple, elegant, and dynamic style. 2. Others: The Excelle features a brand-new powertrain system, with the 1.3T+48V mild hybrid engine and the classic 1.5L DVVT four-cylinder engine, comprehensively balancing power, fuel consumption, and a good driving experience. It offers diverse choices to meet the needs of different consumers, providing a high-level power experience.
17
3
Share

What are the causes of BYD Song ESP system failure?

BYD Song ESP system failure is caused by a malfunction in the vehicle's traction control system, which requires timely inspection and repair. Below is a detailed introduction about automotive repair: 1. Overview: Automotive repair is a general term for vehicle maintenance and repair. It involves using technical means to diagnose a faulty vehicle, identify the cause of the malfunction, and take certain measures to eliminate the fault and restore the vehicle to a certain level of performance and safety standards. 2. Others: Automotive repair includes major repairs and minor repairs. Major repairs refer to restorative repairs that use methods such as repairing or replacing any vehicle components (including fundamental parts) to restore the vehicle's proper technical condition and fully (or nearly fully) recover its lifespan. Minor repairs refer to operational repairs that use methods such as replacing or repairing individual parts to ensure or restore the vehicle's operational capability.
9
0
Share

What is the scoring standard for the slope stop test?

The scoring standard for the slope stop test is as follows: 1. After the vehicle stops: If the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line and exceeds 50 cm forward or backward, it is considered a failure; if the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line but does not exceed 50 cm forward or backward, 10 points will be deducted; if the vehicle body is more than 30 cm away from the road edge line after stopping, 10 points will be deducted; if the vehicle body is more than 50 cm away from the road edge line, the test is considered a failure. 2. After the vehicle starts: If the vehicle rolls backward between 30 cm and 50 cm, 20 points will be deducted; if the vehicle rolls backward more than 50 cm after starting, the test is considered a failure.
20
5
Share

What is the purpose of installing a shark fin on a car?

Installing a shark fin on a car serves to enhance signal reception. When driving in mountainous areas, the car's signal can become very weak. With a shark fin installed, the signal reception inside the car is improved. The shark fin can also intercept radio waves, specifically the high-frequency waves from the car's radio, and it has the additional function of discharging static electricity, helping the car overcome resistance generated during driving. During car washes, it's important to avoid excessive cleaning of the shark fin. Although waterproof adhesive is used for the shark fin, over-cleaning can easily damage it and may lead to poor signal reception. For optimal radio performance, the antenna must be tightly integrated with the car's body metal, so it's essential to regularly inspect the shark fin's base and clean it periodically.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.