Can You Still Drive with a Tire Pressure of 1.32?

1 Answers
DiKeegan
07/29/25 1:19pm
It is not recommended to drive with a tire pressure of 1.32 bar. Vehicles are equipped with a tire pressure monitoring system, which typically alerts when the tire pressure falls below 1.5 bar. Hazards of Low Tire Pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and increases the risk of veering off course, compromising driving safety; Increases the movement of various parts of the tire, causing excessive rolling and abnormal heat generation; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire sidewalls prone to cracking, while generating flexing movements that lead to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear. Solutions for Insufficient Tire Pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire; If the tire pressure warning reappears after inflation despite no puncture, it may be due to air leakage caused by a deformed wheel rim. It is advisable to inspect and replace the wheel rim.
Was this review help?
11
0
Share
More Forum Discussions

Where is the vehicle frame located?

Introduction to the position of the vehicle frame: There are two channel steels under the car body, running from the front to the rear of the vehicle, which is the location of the frame. The vehicle frame is supported on the wheels via the suspension system, front axle, and rear axle. The frame, also known as the chassis, is the base of the vehicle, typically composed of two longitudinal beams and several cross beams, supported on the wheels through the suspension system, front axle, and rear axle. Below is an introduction to related content: 1. The vehicle frame is a type of automotive chassis structure, but most modern vehicles no longer use a frame-type chassis design; only trucks and buses still employ it. The vehicle frame is the main load-bearing component of trucks, carrying almost the entire weight of the cargo. The quality of the frame affects the vehicle's lifespan and driving safety. 2. The manufacturing of vehicle frames generally uses stamping forming processes, with bending being the primary deformation method. Therefore, the frame plate requires high formability, meaning the steel plate for the vehicle frame must have excellent comprehensive performance, sufficient strength and toughness, as well as good fatigue resistance and cold forming properties.
6
1
Share

Can the spare tire of the 10th-generation Accord be used on highways?

The spare tire of the 10th-generation Accord is a non-full-size spare tire, and its maximum speed should not exceed 80 km/h, so it cannot be used on highways. There are three types of spare tires: 1. Full-size spare tire: The specifications of a full-size spare tire are exactly the same as the other four tires on the vehicle, and it can replace any temporarily or permanently unusable tire; 2. Non-full-size spare tire: The diameter and width of this type of spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement and must be installed on non-drive wheels, with a maximum speed not exceeding 80 km/h; 3. Run-flat tire: Also known as a safety tire or a tire that can run flat, compared to ordinary tires, run-flat tires will not leak air or leak very slowly after being punctured, maintaining the driving profile, and the tire bead can remain fixed on the rim, ensuring the car can continue to drive for a long time or temporarily to a repair station.
9
0
Share

What is Displacement Related to

The displacement size of a car is determined by the engine. Generally, a larger displacement means the engine releases more energy per unit time (i.e., converting the chemical energy of fuel into mechanical energy), which translates to better "power performance." Displacement can be considered one of the most important parameters of an engine, as it directly affects many technical indicators. Typically, within the respective categories of naturally aspirated and turbocharged engines, displacement is proportional to power, while also being proportional to fuel consumption and carbon emissions—though this is not absolute. According to the standards in Mainland China, classifications include: micro cars (displacement below 1L), compact cars (displacement 1.0-1.6L), mid-size cars (displacement 1.6-2.5L), executive cars (displacement 2.5-4.0L), and luxury cars (displacement above 4L). Today, the widespread application of turbocharging technology has enabled smaller-displacement turbocharged engines to achieve better power performance and lower fuel consumption. Overall, an engine's displacement largely represents a car's positioning, and there can be certain differences in power performance (power, torque) and fuel consumption among engines of the same displacement due to technical factors.
9
2
Share

What is the lane with serrated edges on both sides called?

The lane with serrated edges on both sides is called a 'variable lane'. Typically, there are zigzag diagonal lines on both sides of the lane. Traffic authorities adjust the direction of the variable lane based on road traffic conditions, usually switching between straight and turning directions to maximize lane utilization and alleviate traffic congestion. Above the serrated lane, there is usually a directional sign, or corresponding variable lane signs on both sides of the road, reminding drivers to pay attention to the current direction of the variable lane. After entering the variable lane, drivers must follow the directions indicated by the overhead signs. Generally, when there is heavier traffic in the left lane, it will switch to a left-turn lane, and similarly, the right lane will switch to a right-turn lane when traffic is heavier on that side. On both sides of the road, there are usually posted time periods indicating the direction of the serrated lane. The direction of the serrated lane varies at different times, and entry is prohibited during other periods. Particularly during morning and evening rush hours, the direction of the serrated lane may be reversed. Before entering the lane, drivers must confirm the current direction; otherwise, they risk driving against traffic, which can result in fines, penalty points, traffic congestion, and compromised road safety.
17
2
Share

How to Change the Transmission Oil for Geely Vision X3?

The steps to change the transmission oil for Geely Vision X3 are as follows: 1. First, lift the car and place a large container underneath to catch the used oil. 2. Use an appropriate screwdriver to remove the inner and outer shells of the transmission. Some transmission oil will flow out at this point, so be careful to avoid it. After a few minutes, when most of the oil has drained, remove the last oil pan, making sure to support it carefully by hand as there will still be a significant amount of used oil. 3. Upon removal, you will notice residue at the bottom of the oil pan. Carefully remove the transmission oil filter, at which point you can clearly see the solenoid valve used for gear shifting control. 4. Remove the oil pan gasket and clean the surrounding residue. If the gaps are difficult to clean, use tools. Over time, the rubber on the gasket may stick to the machine edges, making it hard to remove. Use a small scraper and spray some carburetor cleaner to make the process easier and more thorough. Wipe all cleaned transmission oil filter components with cotton cloth and then reinstall them one by one.
17
1
Share

Do Luxury Cars Have Manual Transmissions?

Luxury high-end cars do have manual transmission models, such as the Jaguar F-TYPE, Dodge Challenger SRT Hellcat, Chevrolet Corvette Z06, Porsche 911 R, and Aston Martin V12 Vantage S. Below are specific introductions: 1. Jaguar F-TYPE: As Jaguar's popular sports car, the brand heavily promotes the manual version of the F-Type because, for hot hatches or entry-level sports cars, manual transmissions are inherently one of the sources of driving pleasure. The F-TYPE is equipped with a ZF-built 6-speed manual transmission with a shift throw of only 45mm and tightly spaced gear ratios, making it difficult even for demanding manual enthusiasts to find fault with this gearbox. 2. Dodge Challenger SRT Hellcat: While the Mustang and Camaro may be more well-known domestically, the untamed Dodge Challenger is equally a legendary American muscle car. The current Dodge Challenger SRT Hellcat, with its wild appearance and powerful V8 engine, stands as one of the most insane American V8 sports cars available. The Challenger SRT Hellcat is powered by a supercharged 6.2-liter HEMI V8 engine, delivering over 600 horsepower (447 kW). This monstrous engine paired with a 6-speed manual transmission offers 'beast-level' driving performance.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.