Can You Still Drive with a Damaged Tire?

1 Answers
DiCamila
07/25/25 1:41pm
Whether you can continue driving with a damaged tire depends on the actual condition of the tire. Here are more details about tire damage: 1. Punctured tire: (1) First, check the tire pressure. If there is still sufficient air pressure, you can continue driving, but be sure to keep the speed low—no more than 60 km/h. (2) If the tire remains flat and severely deflated when pressed, you should not continue driving and must replace it with a spare tire. 2. Assess the extent of damage and tire material: A completely blown-out tire cannot be driven on. However, if the vehicle is equipped with run-flat tires and the rim is intact, you can replace it with a spare tire and continue driving.
Was this review help?
9
3
Share
More Forum Discussions

How to Maintain Brake Pads?

Brake pad maintenance tips are as follows: 1. Under normal driving conditions, inspect the brake pads every 5,000 kilometers. Check not only the remaining thickness but also the wear status of the brake pads, whether both sides are wearing evenly, and if they retract properly. Address any abnormalities immediately. 2. Brake pads generally consist of an iron backing plate and friction material. Do not wait until the friction material is completely worn out before replacing the pads. For example, the front brake pads of a Jetta have a new thickness of 14 mm, with a replacement limit of 7 mm, including over 3 mm of iron backing plate thickness and nearly 4 mm of friction material thickness. 3. Some vehicles come with a brake pad wear warning function. Once the wear limit is reached, the dashboard will alert you to replace the pads. Brake pads that have reached their usage limit must be replaced, as continuing to use them can reduce braking effectiveness and compromise driving safety. 4. When replacing, use the original manufacturer's brake pads to ensure the best braking performance and minimal wear between the pads and discs. 5. When replacing brake pads, always use specialized tools to retract the brake caliper pistons. Avoid using pry bars or other tools to force them back, as this can bend the caliper guide screws and cause the brake pads to seize. 6. After replacing the brake pads, press the brake pedal several times to eliminate the gap between the pads and the disc. Failure to do so may result in no braking on the first press, leading to potential accidents. 7. Newly replaced brake pads require a break-in period of 200 kilometers to achieve optimal braking performance. Drive cautiously during this period.
19
5
Share

What is the difference between engine oil and gear oil?

Gear oil and engine oil differ mainly in the following aspects: 1. Different working environments: Gear oil is mainly used in manual transmissions, reducers, and differentials, while engine oil is primarily used in car engines. Since gear teeth engage through line contact, gear oil must have extremely high viscosity specifications; otherwise, it cannot form an oil film at the gear engagement points. In contrast, engine lubrication points mainly involve surface contact without the extreme high pressure generated by gear engagement, so their viscosity requirements are relatively lower. 2. Different focuses: Gear oil emphasizes protecting gears under high temperatures, while engine oil prioritizes low-temperature fluidity. Moreover, gear oil is strongly alkaline, whereas engine oil is weakly alkaline. 3. Engine oil and gear oil must never be mixed, as this can easily prevent machinery from achieving optimal lubrication and cause damage.
6
1
Share

How to Remove the Cabin Air Filter in a Volvo S80L?

The cabin air filter in a Volvo S80L is located under the center console on the passenger side, to the left below the glove compartment, adjacent to the central computer module. To access it, remove the right-side storage compartment in the dashboard. You'll see a white electrical distribution panel (computer module). Turn off the ignition, disconnect all plugs, remove the distribution panel, then detach the black connector on the left side. This will reveal the heater box containing an approximately 15cm-long panel. Remove this panel to access the cabin air filter. Here's an overview of the cabin air filter's functions: 1. Ensures tight sealing against the housing to prevent unfiltered air from entering the cabin. 2. Filters out dust, pollen, and other particulate matter from the air. 3. Absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other airborne contaminants.
15
4
Share

Can 95 Octane Gasoline Be Added to a 92 Octane Fuel Tank?

It is possible to add 92 octane gasoline to a tank that already contains 95 octane gasoline, as different grades of gasoline do not undergo chemical reactions with each other. Gasolines with different octane ratings have varying levels of octane values, with higher-octane gasoline having higher octane values. Gasoline with higher octane values exhibits greater stability. Below is an introduction to gasoline: 1. Introduction: The English name for gasoline is 'gasoline' or 'gas' (American English), also referred to as 'petrol' (British English). It is a volatile, flammable hydrocarbon mixture liquid derived from the fractional distillation or cracking of petroleum. 2. Properties: The octane rating of gasoline is used to measure the anti-knock properties of a specific gasoline mixture (which can cause knocking and reduce the efficiency of reciprocating engines). Gasoline is produced in several grades based on its octane rating. Other chemicals are often added to gasoline to enhance chemical stability and other performance characteristics, control corrosiveness, and maintain the cleanliness of the fuel system. 3. Density: The specific gravity of gasoline ranges from 0.71 to 0.77, with higher densities indicating larger volumes of aromatic hydrocarbons. The standard reference for marketable gasoline (in Europe) is 0.755 kg/L.
2
2
Share

What to Do When a Car Completely Loses Power and Won't Start?

Solutions for a car that won't start due to a dead battery: 1. Push-starting. This method only applies to manual transmission cars, preferably when the battery still has some charge left and the terrain is suitable. Otherwise, it can be difficult to implement, especially on an uphill slope. First, engage first gear, press the clutch, turn the key to the ACC position, and have someone push the car from behind. When the car gains enough speed, release the clutch, and the car may start successfully due to inertia. 2. Jump-starting. If you don't have an emergency jump starter (which few car owners carry), you can ask for help from nearby car owners to jump-start your car. You will need two jumper cables. Bring the two cars as close together as possible. Generally, car batteries are located under the front hood, so adjust the cars' positions accordingly—either side by side or head to head. Then, locate the batteries of both cars, identify the positive and negative terminals, and remove the terminal covers. Use the red jumper cable's clamp to attach to the positive terminal. Similarly, connect the red cable first, followed by the black one. Once all four terminals are connected, the jump-start setup is complete.
4
1
Share

How high is the fuel consumption of the Hongqi H5?

The fuel consumption of the Hongqi H5 is approximately 8.9 liters per 100 kilometers. More details are as follows: 1. The Hongqi H5 is equipped with a 1.8-liter turbocharged engine with the model number CA4GC18TD-01. This engine has a maximum power of 137 kW and a maximum torque of 250 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. The engine is paired with the third-generation Aisin 6-speed automatic transmission. The cast iron cylinder block offers better high-temperature and high-pressure resistance compared to an aluminum alloy block. 2. The Aisin 6-speed automatic transmission is known for its durability and smooth shifting. As one of the world's top three transmission manufacturers, Aisin's transmissions are widely used by many automotive brands. 3. The front suspension of the Hongqi H5 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link suspension ensures excellent comfort, road grip, and driving stability. Another advantage of the multi-link suspension is its adjustable parameters. 4. The Hongqi H5 is the first product from Hongqi targeting young consumers. Its exterior design is sporty, featuring a bold vertical waterfall grille. The car is also well-equipped with high-end features and ample safety configurations. Since its launch, it has attracted significant attention from young consumers, and the in-house developed 1.8T engine meets mainstream performance standards.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.