Can You Still Drive When the SVS Light Comes On in a Diesel Vehicle?

2 Answers
MacAubrey
07/29/25 8:17am
When the SVS light comes on in a diesel vehicle, it indicates an engine malfunction. The following details describe the issue: 1. The SVS indicator light in a diesel vehicle is an engine malfunction warning light, signaling that the engine has encountered a fault. The SVS light illuminates when the engine's ECU detects a malfunction after starting the engine, indicating that the vehicle's engine has a problem. 2. For such engine malfunctions, it is recommended to visit a 4S shop and consult a professional mechanic for diagnosis and repair. The first step is to check whether the issue is related to a sensor or wiring fault. If it is an engine malfunction, it should be addressed promptly. 3. To resolve the issue when the SVS light comes on in a diesel engine, you can attempt to start the engine. If it fails to start, the problem might be with the fuel pump, which may require replacement. 4. If the engine starts, the issue could be related to other sensor faults. In such cases, the vehicle may still be drivable, but there is a possibility that the fault could affect normal operation. It is advisable to have the vehicle inspected at a repair shop as soon as possible.
Was this review help?
13
4
Share
MacLondyn
08/12/25 11:28am
I've been driving a diesel car for over ten years, and the SVS light has come on several times before. I remember once on a long trip, the light suddenly lit up, and I quickly pulled over to check the manual. It said the emission system needed inspection. I asked a mechanic, and he said it might be a clogged DPF or a sensor issue. If there are no other warning lights, you can still drive slowly to the nearest repair shop, but definitely avoid accelerating or braking hard on the highway. So I drove carefully to the auto repair shop, and after inspection, it turned out the particulate filter had too much carbon buildup—just needed cleaning. If you drive too far with the light on, a small issue can turn into a major repair, costing more money, so don’t try to save by delaying. Safety comes first. Regular maintenance can help prevent such situations.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Where is Jiangling Pickup Produced?

Jiangling Pickup's production base is located in Nanchang, Jiangxi. It already includes four major series with over 400 models, such as Transit vehicles, "Bodian" pickups, "Kaiyun" light trucks, and Baowei BUV multi-purpose commercial vehicles. Jiangling Motors will establish a new base to expand production capacity, located in the Xiaolan Economic Development Zone, covering an area of 125.32 hectares. Below is an introduction to pickup-related content: 1. Policies: Policies vary by region, so it is recommended to consult the local traffic department or vehicle management office in advance to check if pickups are allowed in urban areas. 2. Pickup Nature: The vehicle nature of pickups during registration is classified as a truck, and they naturally operate under truck traffic restrictions. 3. Laws and Regulations: According to Chinese laws and regulations, pickups are defined as light general-purpose trucks. Major cities in China, including some second and third-tier cities, impose time and route restrictions on trucks. Driving pickups into urban areas may affect the city's image, and many cities prohibit pickups from entering urban areas to maintain a good city image.
4
3
Share

What Causes the Squeaking and Friction Sound in Audi Steering Wheel?

Introduction to the causes of squeaking and friction sound in Audi steering wheel: 1. Friction between plastic parts: Since the steering wheel is usually composed of plastic parts, if the temperature drops, the plastic may harden, naturally leading to friction sounds. 2. Abnormal sound from inside the steering wheel: If the sound comes from inside the steering wheel, the problem is most likely caused by the steering wheel's clock spring. Remove the clock spring and apply some grease to see if the sound persists. If it does, replace the clock spring. 3. Aging of the tie rod end: If the tie rod end ages, it can cause the steering wheel to shake and produce noise. In this case, the tie rod end should be replaced, followed by a four-wheel alignment. 4. Abnormal sound from the stabilizer bar: If the sound is not from the shock absorber, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, while damaged ones must be replaced. 5. Abnormal sound from the shock absorber top bearing: Open the hood and listen to see if the sound comes from the top of the shock absorber to determine if it's from the shock absorber's top bearing. 6. Steering gear failure: If the noise is very loud when turning, it may be due to excessive gear clearance in the steering gear, which requires replacement. 7. Improper tension or aging of the power steering belt: For mechanical hydraulic power steering, if the belt is too loose or too tight or has aged, it can produce abnormal sounds. Adjust the belt tension or replace the belt.
6
2
Share

What is Lexus KDSS?

Lexus KDSS is a Kinetic Dynamic Suspension System. The following are related introductions: 1. Body dimensions: The length, width, and height are 5235mm, 1900mm, and 1450mm respectively, with a wheelbase of 3125mm. 2. Power: It uses a 3.5-liter naturally aspirated engine, with a maximum power of 220kW and a maximum torque of 350 Nm. The engine's maximum power speed is 6600 rpm, and the maximum torque speed is 5100 rpm. This engine is equipped with VVT-i and VT-iw technologies and uses an aluminum alloy cylinder head and block.
11
4
Share

What causes the ABS warning light to illuminate in an old Jetta?

There are various states in which the ABS light may illuminate, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on constantly (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose system wiring connections or poor contact in the ABS relay, leading to system failure. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple electrical components are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor electrical connection in the ABS hydraulic valve body wiring; ABS computer malfunction. Solution: Loosen and retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors; replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically found on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage down fully, then release the pedal to complete the self-setting process. Replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
1
1
Share

Does Lexus Support CarPlay?

Lexus supports CarPlay. Below are the relevant details: 1. Brand Logo: The pronunciation of "Lexus" is similar to the English word "Luxury," evoking an impression of luxury vehicles. The Lexus car emblem features the uppercase letter "L" from the name "Lexus," enclosed within an oval. The oval symbolizes the Earth, representing the global presence of Lexus vehicles. 2. Design Style: Lexus design aesthetics, combined with F1 aerodynamic testing, give the ISF a dynamic and sporty style. Two prominent lines extend downward from the base of the A-pillar, glide past the sides of the grille, and outline the contours of the large front air intakes on the front bumper.
9
1
Share

Is Geely a Fortune Global 500 Company?

Geely is a Fortune Global 500 company. Apart from five state-owned automakers led by SAIC Group, Geely Holding is the only private automaker to be selected. Automobile enterprises need to achieve breakthroughs in the entire system including R&D, manufacturing, experience, and supply chain. Geely has been continuously accumulating strength through refinement and gradually emerging. Geely's development has been very rapid, and it has now established five global engineering R&D centers and five styling design centers. The following is relevant content introduction: 1. Geely Group: Geely Holding Group Co., Ltd. is a private car production and operation enterprise. Geely Holding Group owns automobile brands such as Volvo Cars, Geely Auto, and Lynk & Co. 2. Geely's independent brands include: Haoqing, the mid-level sedan Free Cruiser, Maple, King Kong, and the sports car Beauty Leopard.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.