Can You Still Drive When the Mercedes-Benz Collision Prevention System Stops?

1 Answers
LaHeidi
07/29/25 8:55pm
Can You Still Drive When the Mercedes-Benz Collision Prevention System Stops? Yes, you can still drive when the Mercedes-Benz collision prevention system stops. Below is an introduction to the Mercedes-Benz collision prevention system: 1. Signal Acquisition System: Utilizes technologies such as lasers, sonar, and radar to automatically monitor the vehicle's speed, the speed of the vehicle ahead, and the distance between them. 2. Data Processing System: The computer chip processes the instantaneous relative speed of the two vehicles and the distance between them to determine the safe distance. If the distance is less than the safe distance, the data processing system will issue a command. 3. Actuator: Responsible for receiving and executing commands from the data processing system, while also sounding an alarm to remind the driver to brake. If the driver does not execute the command, the actuator will take corresponding measures, such as adjusting the seat position, closing the windows, automatic braking, or locking the steering wheel.
Was this review help?
6
5
Share
More Forum Discussions

Under which company is the Si Hao car brand?

Si Hao is a new brand released by Volkswagen (Anhui) Co., Ltd. (formerly known as JAC Volkswagen Co., Ltd.), a joint venture between Anhui Jianghuai Automobile Group Corp., Ltd. and Volkswagen Group (China). It is also one of the sub-brands under Volkswagen. The brand was established on April 24, 2018. Due to its relatively short history, the brand influence of Si Hao is currently not significant. Here is more information: Si Hao Automobile: A joint venture brand, the Spanish name "SOL" of Si Hao means "sun." Originally, it was the new energy brand of JAC Volkswagen. However, with the progress of the JAC Volkswagen joint venture cooperation, it has now become the fifth joint venture sub-brand of Volkswagen in China and the first brand under the JAC Volkswagen joint venture cooperation. The brand's products include both fuel vehicles and pure electric vehicles. Category: As the 13th sub-brand of Volkswagen, Si Hao covers three major product categories: sedans, SUVs, and station wagons. Currently available models include the Si Hao E20X, Si Hao A5, and Si Hao X8, spanning both traditional fuel vehicles and the new energy vehicle market, providing users with high-quality intelligent experiences.
8
3
Share

What is the fuel consumption of the Sehol X8 per 100 kilometers?

The official fuel consumption per 100 kilometers is 7.2 liters. Here is some relevant information about the Sehol X8: Vehicle Data: The Sehol X8 is a mid-size SUV with dimensions of 4815mm in length, 1870mm in width, and 1758mm in height, and a wheelbase of 2830mm. Power Configuration: The Jianghuai Sehol X8 is a five-door, five-seat SUV, and all models are equipped with a 1.5-liter turbocharged four-cylinder engine. This engine has a maximum power output of 135 kW, with the maximum power achieved at 5500 rpm, and a maximum torque of 300 Nm, with the maximum torque available between 1800 and 3500 rpm. Vehicle Configuration: This engine features DVVT technology and direct fuel injection, and it uses an aluminum cylinder head and a cast iron cylinder block. The cast iron cylinder block enhances the engine's reliability and durability, as it can withstand higher temperatures and pressures. The engine is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. The dual-clutch transmission improves the car's gear-shifting speed and transmission efficiency.
14
2
Share

What is the reason for water dripping from the Encore's exhaust pipe?

The reason for water dripping from the Encore's exhaust pipe is that after gasoline is burned, it generates carbon dioxide and water vapor, which condense into water droplets when they encounter cold air while being expelled through the exhaust pipe. The exhaust pipe is installed between the engine exhaust manifold and the muffler, providing a flexible connection for the exhaust system and serving to reduce vibration and noise. The Encore is a compact SUV with body dimensions of 4295mm in length, 1798mm in width, and 1607mm in height. It is equipped with a 1.0T turbocharged engine, delivering a maximum power of 92kW and a maximum torque of 180Nm, paired with a 6-speed automatic transmission.
18
2
Share

What does car OTA upgrade mean?

Car OTA upgrade refers to over-the-air firmware and software updates. OTA not only provides a more convenient way to upgrade vehicles but also allows consumers to experience smarter and more convenient car usage. The full English name of OTA is Over the Air Technology, which means downloading new software update packages from remote servers via the internet to upgrade the system. The significance of OTA upgrades for smart connected cars includes: 1. Quickly fixing system defects; 2. Rapid iteration to improve products and user experience; 3. Saving time and money for both parties.
7
1
Share

How to remotely start the Lynk & Co 03?

Lynk & Co 03 remote start method is: 1. Take out the remote key; 2. Press the remote start button, the vehicle warning lights will flash three times to complete the startup. The Lynk & Co 03 is a compact sedan with body dimensions of: length 4639mm, width 1840mm, height 1460mm, wheelbase 2780mm, trunk capacity 500L, and fuel tank capacity 61L. The Lynk & Co 03 is equipped with a 1.5L turbocharged engine, delivering maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 245Nm, paired with a 1.5L turbocharged engine.
12
5
Share

How to Control the Clutch During Subject Two Driving Test?

There are mainly two methods to control the clutch during the Subject Two driving test. Below are detailed explanations of these two control methods: 1. Proper Seat Adjustment: Adjust the seat and rearview mirrors appropriately. Move the seat forward or backward so that your back is firmly against the seat backrest. When pressing the clutch, use the heel of your left foot as a pivot point and press the clutch pedal with the ball of your foot. Adjust the distance from the steering wheel. Extend your arms straight so that your hands rest on the top of the steering wheel, with each hand positioned at the 3 and 9 o'clock positions. Your arms should remain slightly bent. Maintain a fist's distance between your body and the steering wheel. 2. Identifying the Clutch's Half-Engagement Point: Signs of the clutch's half-engagement state include: slight shaking of the car body, a forward thrust sensation, a noticeable drop in the RPM gauge needle, a deeper and lower engine sound, and a feeling of resistance against the clutch pedal. When these signs appear, it indicates that the car is in the clutch's half-engagement state.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.