Can You Still Drive When Mercedes-Benz Indicates Low Tire Pressure?

2 Answers
LeWeston
07/25/25 4:04am
Mercedes-Benz vehicles should not be driven with low tire pressure. According to the international GBT2978-2008 standard requirements, the standard tire pressure is 2.4-2.5bar. In winter, the tire pressure should be slightly increased by about 0.2bar based on the standard tire pressure. In summer, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair, then reinflate the tire; If the low tire pressure warning reappears some time after inflation without any puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary.
Was this review help?
20
2
Share
MacMorgan
08/10/25 5:15pm
I have extensive experience with tire pressure warnings. Last week while driving my Mercedes on the highway, the TPMS light came on, which scared me into immediately turning on hazard lights and pulling over to inspect. Found out the right front tire had a nail puncture, with pressure dropping from normal 2.5bar to 1.8bar. Continuing to drive could not only ruin the tire but risk a blowout at high speed. If the dashboard shows pressure above 1.8bar, you may attempt driving under 80km/h to a repair shop while continuously monitoring pressure changes. Always keep a portable inflator in your car for emergencies - never risk driving if pressure falls below 1.5bar, call a tow truck instead. For daily maintenance, manually check cold tire pressure monthly with a gauge to prevent sudden incidents.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What Aspects Should Be Paid Attention to During a Test Drive?

Here is an introduction to the aspects that need attention during a test drive: Signing a test drive agreement: Before the test drive, the 4S store usually requires signing a test drive agreement, which is mainly to clarify the responsibilities of both parties, such as how to divide responsibilities in case of an accident. Understanding the test drive process: Generally, the test drive personnel will first demonstrate and operate the vehicle. During the driving process, the first step is to familiarize oneself with the vehicle's operation and performance. It is best not to change lanes, accelerate, or brake suddenly. If acceleration is necessary, choose an appropriate section of the road to avoid accidents during the test drive. 3. Safety precautions: The test drive route is usually designated by the 4S store, but even the designated route carries various risks. Ensure safety measures are in place. Both the test driver and the accompanying personnel, whether in the front or back seats, should fasten their seat belts.
19
2
Share

Do all three engine mounts need to be replaced together?

Engine mounts do not need to be replaced all three together. Here are the functions of engine mounts: 1. Eliminate resonance: When the engine is running, it generates certain vibrations. The rubber components in engine mounts can eliminate the resonance produced during engine operation; 2. Hydraulic pressure reduction: Some engine mounts also have hydraulic pressure reduction functions, with the main purpose being the same. If an engine mount is damaged, the vibrations from the engine will cause the entire vehicle body to vibrate; 3. Reduce accelerated damage: There are generally three engine mounts, fixed to the vehicle frame. If one is damaged and not replaced in time, it disrupts the balance and can cause the other two to wear out faster.
20
1
Share

What does 'how many liters of fuel consumption' mean?

Fuel consumption in 'how many liters' refers to the number of liters consumed per 100 kilometers. A car's fuel consumption is not only related to the car itself but also closely tied to the driver's habits and road conditions. Poor driving habits and frequent driving on congested roads will inevitably result in higher fuel consumption. More details are as follows: 1. Improving fuel economy: To enhance fuel efficiency while driving, it is advisable to avoid sudden acceleration and deceleration and maintain a steady speed as much as possible. This is the most fuel-efficient way to drive. 2. Avoid unnecessary overtaking: Unnecessary overtaking should also be minimized while driving. Frequent driving on congested roads can significantly increase fuel consumption. In such conditions, cars often have to stop and start frequently. Starting from a standstill requires substantial acceleration, demanding a large output of kinetic energy from the engine. If the car frequently stops and starts, fuel consumption will undoubtedly rise.
3
5
Share

What does 'a full set of front-end components' mean for an accident vehicle?

For an accident vehicle, 'a full set of front-end components' includes the front bumper, headlights, grille, hood, front crash beam, radiator frame, condenser, and radiator. Below is a brief introduction about accident vehicles: Brief Introduction: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear and tear accidents, resulting in decreased mechanical performance and economic value. Exterior Inspection: Align your line of sight with the vehicle's waistline. This makes it easier to observe the condition of the vehicle's paint surface, check for color differences, and ensure the gloss level is consistent. Maintenance: Turn the ignition key to power on the vehicle for self-inspection before starting the engine. Observe if there are any abnormal warning lights on the dashboard.
3
2
Share

Can a Non-local China 5 Vehicle Be Transferred to Xi'an?

Non-local China 5 vehicles can be transferred to Xi'an. According to the "Notice of Xi'an Municipal People's Government on Implementing the National Fifth Stage Motor Vehicle Pollutant Emission Standards": 1. Starting from January 1, 2017: All light-duty gasoline vehicles, light-duty hybrid electric vehicles, light-duty dual-fuel vehicles, light-duty single-gas fuel vehicles, and certain heavy-duty diesel vehicles, heavy-duty dual-fuel vehicles, and heavy-duty single-gas fuel vehicles produced, imported, sold, registered, or transferred within the administrative region of Xi'an must meet the China 5 emission standard requirements. 2. Starting from January 1, 2018: All light-duty diesel vehicles and light-duty hybrid electric vehicles that consume diesel fuel produced, imported, sold, registered, or transferred within the administrative region of Xi'an must meet the China 5 emission standard requirements.
2
0
Share

What is the curb weight of the Hongqi HS7?

The curb weight of the Hongqi HS7 is 2320kg. Below are the relevant details about the Hongqi HS7: Dimensions: Positioned as a mid-to-large-size SUV, the vehicle measures 5035mm in length, 1989mm in width, and 1778mm in height, with a wheelbase of 3008mm. The height of the high-end model is 1756mm, and all variants feature a 5-seat configuration. Powertrain: The Hongqi HS7 is equipped with a 3.0L V6 supercharged engine across all variants, paired with an 8-speed automatic transmission. It delivers a maximum power of 248KW, maximum horsepower of 337ps, and maximum torque of 445nm. All models utilize direct fuel injection.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.