Can you step on the brake when hearing the straight-line driving command in Subject 3?

2 Answers
LincolnLee
07/29/25 5:52am
You cannot step on the brake when hearing the straight-line driving command in Subject 3. Before straight-line driving, ensure there are no obstacles ahead and maintain a distance of more than 100 meters from the vehicle in front. Only after the system indicates the end of straight-line driving should you apply the brake and perform other actions. Evaluation criteria for straight-line driving: Unstable direction control, inability to maintain the vehicle's straight-line movement (fail); Failure to take deceleration measures when encountering braking from the vehicle ahead (fail); Not observing the rear traffic situation via mirrors for more than 20 seconds (deduct 10 points); Unaware of the vehicle's speed (deduct 10 points); Failure to promptly detect road obstacles and take deceleration measures (deduct 10 points). Tips for straight-line driving: First, look straight ahead and pay attention to both sides, select a reference point, maintain straight-line driving, adjust the direction in time, and always be aware of various traffic situations ahead to detect and handle them promptly. Look far and near while holding the steering wheel straight. The driver should adjust the viewing distance ahead according to the speed changes. Operate the steering wheel smoothly and naturally with both hands, keeping them shoulder-width apart without applying too much force. When adjusting direction, turn early and slightly, with a balance between turning and returning, pulling with one hand and pushing with the other, coordinating both hands to maintain the vehicle's straight-line movement. Maintain a steady speed for straight-line driving.
Was this review help?
15
1
Share
Gemma
08/12/25 9:23am
As an experienced driving instructor with years of teaching, I've witnessed countless scenarios during the Subject 3 driving test. The straight-line driving exercise primarily assesses your vehicle control and stability. Under normal circumstances, there's absolutely no need to apply the brakes, as doing so may cause speed instability, potentially leading the examiner to mark it as an operational error or deduct points. However, in real driving, safety is paramount. If during the test a pedestrian suddenly crosses, a vehicle brakes abruptly, or there's an unexpected change at an intersection, you must react immediately by braking to ensure safety. Examiners aren't robots; they evaluate overall safety awareness. Remember: don't unnecessarily brake when nothing's wrong, but always respond to emergencies. During practice, develop the habit of focusing ahead and maintaining a steady speed—key to not letting nerves misguide your actions. It's only after passing that you realize how crucial these small details are.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Is the 2.0L Engine of Toyota RAV4 Powerful Enough?

Toyota RAV4's 2.0L engine provides sufficient power with a maximum output of 111 kW and peak torque of 192 Nm, delivering brisk acceleration and effortless overtaking capability, making it fully adequate for daily family use. The Toyota RAV4 2.0L is a compact 5-door, 5-seat SUV with dimensions of 4600mm in length, 1855mm in width, and 1680mm in height, featuring a wheelbase of 2690mm and a top speed of 180 km/h. It is equipped with a CVT continuously variable transmission. The fuel tank capacity of the Toyota RAV4 2.0L is 55 liters, and its engine generates a maximum torque of 209 Nm at 4400-5000 rpm. Standard safety features include full-seatbelt reminder, lane departure warning, vehicle stability control, traction control, and child seat anchors.
14
2
Share

What is the method for replacing the air conditioning filter in a Volvo XC60?

Volvo XC60 air conditioning filter replacement method is as follows: 1. Remove the clips located at the front of the passenger side in the engine compartment, then take out the sound insulation cotton; 2. Remove the filter. After taking out the sound insulation cotton, reach in to remove the cover plate, then reach in again to take out the air conditioning filter. Note that there is an arrow indicator on the outer side of the filter, and it should be installed in the correct direction to avoid reverse installation. The air conditioning filter is a filter installed in the car's air conditioning system, which can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. The Volvo XC60 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 140 kW and a maximum torque of 300 Nm, using front-wheel drive.
8
0
Share

What is the reason for the warm air not being hot in external circulation but hot in internal circulation?

The reason for the warm air not being hot in external circulation but hot in internal circulation is: the external environment temperature is low, and when in external circulation, the cabin is connected to the outside, allowing cold air to enter. When internal circulation is turned on, it means external circulation is turned off, isolating the cabin from the outside, so no cold air enters, hence the external circulation is not hot while the internal circulation is. The methods for using air circulation in cars are: 1. Use internal circulation during traffic jams and external circulation during high-speed driving; 2. The use of internal and external circulation should be combined with air conditioning and heating; 3. Use external circulation during long-distance driving to allow fresh outside air to enter the car, avoiding low oxygen levels inside the car.
14
2
Share

How to kick-start a scooter when the battery is dead?

The method to kick-start a scooter when the battery is dead is: 1. Turn the scooter's key switch to the off position, hold the brake lever, and apply a little throttle; 2. Step on the kick-start lever to rotate the engine. Once you feel compression resistance, release the kick-start lever back to its highest point and then step down again. The classification of throttle pedals is: 1. Hanging-type throttle pedal; 2. Floor-mounted throttle pedal. Pressing the throttle pedal does not control the fuel injection amount but regulates the intake air volume through the throttle opening. The vehicle's computer adjusts the fuel injection amount based on the intake air volume. The throttle connects to the air filter at the top and the engine block at the bottom, known as the throat of the car engine.
4
5
Share

How to reset the maintenance light on Changan CS75 Plus?

The method to reset the maintenance light on Changan CS75 is as follows: 1. Turn the car key to the ON position (full vehicle power-on state), which means turning the key twice or pressing the start button twice for keyless start, then press the selection button on the left side of the steering wheel as indicated in the red-marked area in the diagram; 2. Press and hold the reset button for about 5 seconds (do not release the reset button). Turn off the vehicle power while still holding the reset button, then turn on the full vehicle power again. You will see that the maintenance reminder has been cleared. Taking the 2021 Changan CS75 as an example, it is a compact SUV with body dimensions of: length 4650mm, width 1850mm, height 1715mm, a wheelbase of 2700mm, a fuel tank capacity of 58 liters, and a curb weight of 1600kg.
7
3
Share

Is it normal for a CVT to jerk slightly at start-up and then run smoothly?

It is normal for a CVT to jerk slightly at start-up and then run smoothly. A CVT refers to a continuously variable transmission, which is a type of automatic transmission in vehicles. It can continuously obtain any transmission ratio within the speed range, achieving optimal matching between the drivetrain and engine conditions through continuous variable transmission. Transmissions are categorized into AT (automatic transmission), CVT (continuously variable transmission), AMT (automated manual transmission), and DCT (dual-clutch transmission). Transmission working principles: 1. Manual transmissions consist of gears and shafts, achieving speed and torque changes through different gear combinations. 2. Automatic transmissions are composed of torque converters, planetary gears, and hydraulic control systems, achieving speed and torque changes through hydraulic transmission and gear combinations.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.