Can You Shift Gears While Braking?

1 Answers
SanJeffrey
07/24/25 10:54pm
Can You Shift Gears While Braking? It is possible to shift gears while braking in an automatic transmission vehicle. During driving, you can switch between D, S, L, and M gears. For example, you can shift directly from L gear to S gear or D gear without pressing the brake. Reasons why you can shift gears while braking: In an automatic transmission vehicle, switching between D, S, L, and M gears is allowed during driving. Shifting from L gear to S gear or D gear can be done without braking. However, when shifting from D gear or S gear to L gear, you need to pay attention to the speed. If the speed is high, you should press the brake to reduce the speed to 30 km/h before shifting into L gear. This is mainly to protect the transmission from impact. Direct switching between D gear and S gear is possible without pressing the brake. Disadvantages of shifting gears while braking for a long time: Prolonged braking while shifting can cause the brake pads to overheat and wear out. It is recommended to shift into P gear or N gear instead. Doing so will be more comfortable and result in lower fuel consumption. On slopes, it is advisable to shift into P gear to prevent the vehicle from rolling and ensure safety. On flat roads, remember to engage the handbrake when shifting into N gear to avoid potential hazards.
Was this review help?
7
0
Share
More Forum Discussions

How to use the manual mode of the Chevrolet Cavalier automatic transmission?

The manual mode of the Chevrolet Cavalier automatic transmission requires stepping on the brake, pushing the gear lever upward to lock it in position, and continuing to push upward when reaching certain RPMs for gear shifting. Below are additional details about the Cavalier: 1. The Cavalier offers a spacious and comfortable driving experience that surpasses its peers, catering to family-oriented consumers. It adopts Chevrolet's new family design style while incorporating design elements from the Cruze and Malibu. The headlights feature a new design, appearing more restrained and profound, with built-in lenses and LED light sources. The side profile showcases relatively simple and light rising waistlines. The compact tail lights emphasize the youthful and fashionable style of the new car. The trunk space is deep, and there are numerous storage compartments inside the cabin. 2. The Cavalier is equipped with 14 full-function ESC electronic stability control systems, including ESC electronic stability control and HAS hill-start assist, providing reliable protection for daily driving. Additionally, the Cavalier is the first to feature an advanced intelligent independent digital tire pressure monitoring system, which displays tire pressure digitally and alerts the driver promptly in case of abnormal tire pressure, eliminating potential safety hazards. 3. The Cavalier's 7-inch HD touchscreen in the center console is a rare configuration in its class. It comes with Chevrolet's new-generation intelligent in-car connectivity system, supporting natural voice recognition and compatibility with Baidu Carlife.
8
1
Share

What are the steps to start and drive a Mercedes-Benz?

Here are the steps to start and drive a Mercedes-Benz: 1. Most Mercedes-Benz vehicles are equipped with a keyless start system, simply carry the key fob into the vehicle; 2. Then ensure the gear is in the P position, press the brake pedal, and press the start button to ignite the engine; 3. Do not release the brake pedal at this time, shift into D or R gear to begin driving. Below is an introduction to Mercedes-Benz: 1. Mercedes-Benz, a German automotive brand, is one of the premium car brands renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. 2. "Exquisite, reliable, durable" is the motto of Mercedes-Benz. To maintain high quality and develop new technologies, Mercedes-Benz invests up to $400 million annually in research and development. With elegant styling and continuous updates, Mercedes-Benz vehicles feature traditional and streamlined body characteristics that immediately convey a "This is a Mercedes" impression. It pioneered the development and application of gasoline injection technology and leads in vehicle electronics. 3. Mercedes-Benz was also the first to introduce diesel engines in premium cars. Its racing cars have won over 4,000 championships in racing history, with racing often serving as the "experimental field" for automotive new technologies. Annually, over a hundred vehicles are used for various reliability tests including safety crash tests. While ordinary cars tend to be scrapped after 100,000 kilometers, it is not uncommon for Mercedes-Benz vehicles to maintain excellent performance even after 300,000 kilometers. Rigorous manufacturing and high-quality material selection are the foundations of Mercedes-Benz's reliability and durability.
4
5
Share

What is the matching method for the new Santana remote control?

Santana remote control matching method is as follows: 1. Take out the Santana remote control key and press the metal button on the top of the remote to extend the mechanical key. 2. Go to the Santana driver's door and locate the mechanical keyhole cover on the right side of the door handle. Insert the mechanical key into the small rectangular hole below the cover to pry it open. 3. Press the unlock button on the remote control, and within 60 seconds, insert the mechanical key into the lock hole, turn it one full rotation to the left, pull the door handle, and open the door. 4. Enter the Santana vehicle, insert the mechanical key into the ignition start keyhole, turn the key one full rotation to the right to start the vehicle. This completes the entire process of matching the Santana remote control key.
8
2
Share

How to Start the CHR?

The starting procedure for the CHR is as follows: 1. For the Toyota CHR, the starting steps are to press the brake, shift to N gear, ignite, shift to D gear, and release the brake to start. 2. For models equipped with a one-key start function, the starting steps are to first press the start button, wait for the ACC light to turn on, and after the vehicle completes self-inspection, press the brake and press the start button again to start the vehicle. Below is a brief introduction to the Toyota CHR: 1. The front face of the Toyota C-HR features the new-generation Toyota style, with headlights spanning a large distance directly from the grille emblem to the A-pillar, creating a striking visual impact. The front bumper is designed with tooth-like decorations on both sides, with a sealed internal structure. The front bumper uses a diamond-patterned grille mesh, showcasing a good sense of layering. LED daytime running lights are standard across all models, while LED headlights are equipped in the luxury version and above, with other models using halogen lights. 2. In terms of interior, the Toyota C-HR appears very composed, with the most eye-catching feature being the "skyward" central control display screen, which, along with some function buttons below, is designed to lean toward the driver's side. Most of the central control area is wrapped in soft materials, offering good texture, and the black lacquer panel running across the front enhances the visual effect.
5
4
Share

How to Locate a Car?

There are several methods available for car positioning: 1. Cars with built-in GPS: Some vehicles come with built-in GPS positioning services in their navigation systems at the time of production. For such cars, simply clarify with the dealer at the time of purchase, download the corresponding app on your phone, complete the registration as required, and you can track your car's location in real-time. 2. Install a GPS tracker in the car: By installing a GPS tracker, vehicle information can be linked to the owner's mobile phone. The owner can not only check the vehicle's location and historical driving routes in real-time but also receive timely alarm alerts in case of abnormalities such as speeding, vibration, or theft. 3. Install a GPS dash cam. 4. Utilize a discarded mobile phone for positioning.
19
4
Share

What is the actual fuel consumption of the Baojun 510?

Baojun 510 fuel consumption is 6.2-6.6L/100km. The following is a related introduction about the Baojun 510: 1. Exterior features: In terms of styling design, the Baojun 510 adopts a very distinctive split headlight design, with LED daytime running lights connected to the front grille, which is quite large, while the headlights are positioned on either side of the grille. The rear of the vehicle features conventional halogen tail lights. 2. Configuration: The Baojun 510 is equipped with an 8-inch LCD capacitive touchscreen, along with practical and convenient features such as keyless entry + one-button start, automatic climate control, leather-wrapped steering wheel, cruise control, and power-adjustable/folding/heated exterior rearview mirrors.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.