Can You Sell Your Driver's License Points? What Are the Risks?

What is the actual fuel consumption of the Oshan X7?

The comprehensive fuel consumption of the Oshan X7 is 7.4L per 100 kilometers. However, fuel consumption is influenced by various factors, so the actual usage should be taken as the reference. Factors affecting fuel consumption are as follows: Sudden acceleration and braking can increase fuel consumption by 5%~30% compared to normal driving. Therefore, it is important to avoid sudden braking or acceleration during daily driving. This not only increases fuel consumption but also accelerates vehicle wear; Prolonged idling: Many drivers often let the vehicle idle for a period after starting to warm it up. However, as long as the vehicle is running, it consumes energy, so this operation only increases fuel consumption; Vehicle maintenance: Many drivers neglect car maintenance. Improper maintenance can also lead to increased fuel consumption. For example, a dirty air filter or deteriorated engine oil can cause incomplete fuel combustion, thereby increasing fuel consumption; Bumpy roads consume more fuel: Poor road conditions or uneven surfaces force the vehicle to drive in low gear for extended periods, inevitably increasing fuel consumption; using the trunk as storage increases the vehicle's weight. There is a direct correlation between vehicle weight and fuel consumption—every 10% reduction in weight leads to a corresponding reduction in fuel consumption by several percentage points. Oshan X7 configuration: The Changan Oshan X7 is equipped with the Blue Whale 1.5TGDI engine. This new 280T engine delivers a maximum power of 131Kw and a maximum torque of 265Nm, reaching peak torque of 265Nm at just 1450rpm. The engine features strong scavenging technology, which uses the positive pressure difference between the intake and exhaust pipes to directly sweep fresh air into the exhaust system, reducing residual exhaust gas in the cylinder, improving air charging efficiency, and enhancing engine performance. Low-end torque is increased by over 20%, significantly improving starting performance. The gear-shifting strategy is optimized to achieve engine downspeed, significantly reducing fuel consumption. The Changan Oshan X7 is paired with a DCT dual-clutch transmission developed by the UK R&D center, offering rapid throttle response and excellent acceleration.

2

5

Share

Where is the Changan Oushang engine produced?

Changan Oushang engines are independently produced by Changan Company, with the production location in Chongqing, making them domestically manufactured engines. Among the Changan Oushang series models, the Oushang X7 engine model is JL476ZQCF, with a maximum power of 131kW, maximum horsepower of 178, and maximum torque of 265Nm. The 1.5T version of the Oushang X5 engine model is the Blue Whale NE1.5T, with a maximum power of 132KW, maximum torque of 300Nm, and maximum horsepower of 180. For daily maintenance of Changan Oushang engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid faults, oil should be changed regularly based on usage conditions, and the oil level should be moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

12

1

Share

How to Turn Off the Radio in Volkswagen Tiguan L?

Method to Turn Off the Radio in Volkswagen Tiguan L: The car radio switch is located at the bottom left corner of the screen. Press it once with your hand to turn off the car radio. Related introduction is as follows: 1. Correct usage of the Volkswagen Tiguan L radio: After starting the vehicle, swipe right on the central control screen to find the radio operation interface. Click the play button to turn on the radio. Click the "Settings" option button on the right to see some radio settings, including receiving channels, storing favorite channels, or deleting disliked channels. To adjust the radio volume, pinch the radio switch position with your hand. Turning clockwise increases the volume, while turning counterclockwise decreases it. 2. The car radio is a voice entertainment configuration installed in the car and is one of the earliest and most common configurations of the car audio-visual entertainment system. 3. General car radio settings are divided into: System settings: including time adjustment, radio frequency area settings, BEEP buttons, and advanced settings like language. Audio settings: BASS bass boost, positive numbers indicate an increase, with 7 or 10 being the maximum. TREB treble boost, same as above. Radio settings: Press AS to automatically search for stations, which are saved on positions 1-6. Alternatively, after selecting a frequency, press and hold to save the station on the corresponding number.

2

3

Share

What brand of tires does the 10th-generation Accord use?

The 10th-generation Accord uses Michelin PRIMACY-3 tires, with the tire model being 235/45R18. Michelin was founded in 1889 in Clermont-Ferrand, France. Over more than 100 years, Michelin has undergone continuous innovation and development. It now operates businesses across five continents and has R&D centers in Europe, North America, and Asia. Michelin tires are marketed in over 170 countries worldwide. For the 10th-generation Accord's tires, the following points should be noted during daily use: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread wears flat, it loses its water drainage and anti-skid functions, significantly reducing the car's performance. Small cracks may also pose a risk of blowouts during high-speed driving. Additionally, promptly remove pebbles lodged in the grooves; Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear; Do not splash water to cool the tires. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, park to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber; Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the ground.

1

0

Share

Where is the fuse box located in an Audi A6?

The Audi A6 has two fuse boxes, one on the side where the driver's door opens, and the other on the right side of the trunk. The automotive fuse box refers to the box that houses the car's fuses. Depending on the size of the fuses installed, it can be classified into: small automotive fuse boxes; medium automotive fuse boxes. Large automotive fuse boxes. Common injection molding materials include PBT engineering plastics, each with different high-temperature resistance properties. When selecting an automotive fuse box, factors such as the current of the automotive fuse to be used and the size requirements of the fuse must be considered. Different fuse boxes must be chosen; otherwise, the fuse box and wiring may overheat and cause a fire. Automotive fuses are a type of current fuse that will melt within seconds when the circuit current exceeds twice the fuse's rated current, thereby protecting the circuit. They can be divided into three main categories of fuses. Blade-type fuses can be categorized into: ultra-small blade fuses, small automotive fuses, medium automotive fuses, and large automotive fuses. Rated currents range from 1-40 amperes (A) to large 30-120 amperes (A), with a rated voltage of 32 volts (V). Fork-bolt fuses can be categorized into: small fork-bolt fuses and large fork-bolt fuses. Rated currents range from 30-150 amperes (A) to large 40-800 amperes (A), with rated voltages of 32/125 volts (V). Automotive glass tube fuses can be categorized into: 6.35×30mm glass tube fuses, 6.35×31.75mm glass tube fuses, and 10×38mm glass tube fuses. Rated currents range from 0.5-20 amperes (A) to 10×38mm 20-80 amperes (A), with a rated voltage of 32 volts (V). Precautions for replacing fuses: Replace the fuse according to the rated current value indicated on the fuse box cover; do not use a fuse with a higher rated current. If the new fuse blows immediately, it indicates that there may be a fault in the circuit system, and it should be inspected as soon as possible. In the absence of a spare fuse, in an emergency, you can replace it with a fuse from another device that does not affect driving or safety. If a fuse with the same current load cannot be found, you can use one with a lower rated current than the original fuse.

6

4

Share

How to Turn on the Air Conditioning in a Civic?

Simply press the A/C button on the air conditioning panel to turn the cooling mode on and off. Press the AUTO automatic mode directly, and in the automatic operation mode, it will maintain a stable temperature inside the car based on the external thermometer.

7

3

Share

Can You Sell Your Driver's License Points? What Are the Risks?

What is the actual fuel consumption of the Oshan X7?

Where is the Changan Oushang engine produced?

How to Turn Off the Radio in Volkswagen Tiguan L?

What brand of tires does the 10th-generation Accord use?

Where is the fuse box located in an Audi A6?

How to Turn on the Air Conditioning in a Civic?

How to turn off the radio display on the Roewe RX5?

What engine does the Fengguang 580 use?

Should the Volkswagen Bora use 92 or 95 octane gasoline?

Is the G63 a 4x4 version?