Can You Schedule Multiple Sessions for Subject 1 at Once?

1 Answers
Terry
07/30/25 10:17am
According to regulations, you can schedule up to 3 sessions for the Subject 1 exam simultaneously, but only one session will be successfully booked. The actual booked session depends on whether your ranking in the scheduled sessions exceeds the corresponding exam quota. Generally, the higher your ranking, the greater the chance of successful booking. The inability to book Subject 1 is mainly due to the high number of local applicants and a relatively low personal ranking. There is essentially no way to change this situation, as the driving test scheduling follows ranking rules, and those whose test validity period is about to expire will be prioritized. To increase the chances of successful booking, it's best to choose sessions where your ranking is relatively high. The driving test ranking is not fixed and may change as the number of applicants increases. The higher your ranking, the lower the chance of being pushed out of the exam quota for that session. Additionally, you can schedule up to 3 exam sessions at a time, and it's advisable to maximize each attempt. Even if one session fails, you still have two more chances. If booking is still unsuccessful, you may consider switching to another test center, opting for a more remote or less crowded location, which significantly improves the chances of success. However, driving schools often have rules about which test centers students can book, so candidates should discuss this with their instructors beforehand.
Was this review help?
5
1
Share
More Forum Discussions

How to Check the Condition of Shock Absorbers?

Methods for testing the condition of automotive shock absorbers are as follows: 1. Press down hard on the bumper and then release it. If the car bounces 2~3 times, it indicates that the shock absorber is working well. 2. When the car is driven slowly and emergency braking is applied, if the car vibrates violently, it indicates a problem with the shock absorber. 3. Remove the shock absorber and stand it upright, clamping the lower connecting ring in a bench vise. Pull and press the shock absorber rod several times. There should be a steady resistance during this process, with the resistance when pulling up (rebound) being greater than when pressing down. If the resistance is unstable or there is no resistance, it may indicate a lack of oil inside the shock absorber or damage to the valve components, and repair or replacement of parts should be carried out.
14
3
Share

Which is more fuel-efficient, Corolla or Sagitar?

Sagitar's official combined fuel consumption is 5.5-8L/100km, while Corolla's official combined fuel consumption is 5.4-6.3L/100km. Based on the data, Corolla appears to be more fuel-efficient. However, actual fuel consumption can be influenced by driving habits, weather conditions, and road conditions. Below is a partial introduction to the powertrains of Sagitar and Corolla: 1. Sagitar: It comes with four displacement options - 1.2T, 1.4T, 1.6L, and 2.0T, and offers three transmission choices - dual-clutch, manual, and automatic. 2. Corolla: It is equipped with 1.6L and 1.8L engines, and has added a 1.2T option. In terms of transmission, the new model will be matched with a CVT transmission, while the 1.2T model will also offer a 6-speed manual transmission option.
14
4
Share

What are the warning signs of brake failure?

Introduction to the warning signs of brake failure: 1. The brakes feel increasingly soft. Abnormal weakening of braking force can result from three situations. Insufficient oil pressure in the wheel cylinder or master cylinder, or possible oil leakage. 2. The brake pedal fails to return fully. If the brake does not return, check whether the brake fluid is insufficient, whether there is oil leakage in the brake wheel cylinder, pipelines, or joints, and whether the master cylinder or wheel cylinder components are damaged. 3. The brakes feel increasingly hard. When pressing the brake pedal, if it feels high and stiff, making starting or driving difficult, it may be due to a faulty one-way valve in the vacuum storage tank of the brake booster system. 4. Trembling when pressing the brake. This is usually caused by uneven surface flatness of the brake disc, especially in older vehicles. The faster the speed, the more intense the vibration when braking. It is recommended to replace the wheel hub brake pads. 5. Uneven braking when pressing the brake. This is mainly caused by uneven force application on the brake pads by the left and right wheel cylinders of the brake system.
6
5
Share

Does the Jetta come with a sunroof?

None of the Jetta models are equipped with a sunroof. Here is an introduction to the Jetta: 1. The Jetta features a large hexagonal front grille with a dot-matrix design and the J-shaped brand logo, giving it high recognition. The large C-shaped fog light lines on both sides of the bumper make the car look more dynamic and youthful. 2. The brand logo design is inspired by the streamlined combination of the first letter J of JETTA and the classic V-shaped frame of Volkswagen, symbolizing the Jetta brand's confidence and fearlessness in facing the future and embracing development. 3. Below the logo, there is a small black square, which is the location of the ACC cruise radar. 4. The new Jetta uses an improved economical transmission. Due to different gear ratios, fuel consumption is significantly reduced. At the same time, the new Jetta's fuel supply system adopts a no-return fuel design, combined with the entire engine's compliance with the National IV emission standard and optimized engine management system, resulting in lower fuel consumption compared to the original engine.
18
5
Share

What type of engine oil is recommended for the Ford Explorer?

Ford Explorer recommends using 5W-30 engine oil. The original factory oil is 5W-20 full synthetic engine oil. Below is an introduction to the Explorer: 1. The Explorer is an imported model under the Ford brand, positioned as a mid-to-large-size SUV. 2. The Ford Explorer adopts a front-engine four-wheel-drive layout, with the four-wheel-drive system being an on-demand type and the center differential using a multi-plate clutch. 3. The length, width, and height of the Ford Explorer are 5064mm, 2005mm, and 1798mm respectively, with a wheelbase of 2860mm. 4. The front and rear suspensions of the Ford Explorer are MacPherson strut independent suspension and multi-link independent suspension, with electric power steering. 5. It is equipped with features such as front/rear parking radar, rearview camera, cruise control, driving mode selection, hill start assist, hill descent control, hands-free liftgate, engine immobilizer, keyless start system, and keyless entry system.
12
0
Share

How Much Should You Turn the Steering Wheel When Making a Turn?

First, determine whether it's a wide or tight turn. When turning, first apply the brakes to reduce speed while checking the side mirror on the turning side to ensure there are no pedestrians or vehicles behind. After slowing down and as you're about to enter the turn, gradually turn the steering wheel to adjust the car's position. For U-turns or 90-degree sharp turns, you need to turn the steering wheel quickly and then swiftly return it. Below are relevant details: 1. Right turn: one full turn of the steering wheel. Beginners often move the steering wheel (commonly called 'sliding the wheel') instead of properly turning it when making a right turn, which can result in not completing the turn and entering the wrong lane. The smaller the intersection, the greater the angle the steering wheel needs to be turned. Turning the wheel too little can lead to driving in the wrong direction. Always hold the steering wheel with both hands. For a U-turn, turn the steering wheel with your right hand to the 10 o'clock position, using a left-hand-over-right-hand technique; for a right turn, use a right-hand-over-left-hand technique. Right turn: one full turn of the steering wheel. 2. Left turn: half a turn of the steering wheel. Turning the steering wheel too much during a left turn at a large intersection can also lead to entering the wrong lane. Especially when turning left across two or three lanes, turning the wheel too much from the right lane can interfere with vehicles turning left from the left lane. The correct method is to first turn the steering wheel slightly less than half a turn, and if it feels insufficient, add a bit more to get it just right.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.