Can You Refuel Without Turning Off the Engine?

Where is the BMW 730 Air Filter Located?

BMW 730 air filter locations vary depending on the model: 1. For older BMW 730 models, the air filter is located under the windshield wipers in the engine compartment. 2. For newer BMW 730 models, the air filter is inside the glove compartment on the passenger side. Here are some relevant details: 1. Taking the BMW facelifted 730 as an example, it is a 4-door, 4-seater large sedan with body dimensions of 5273 mm in length, 1902 mm in width, 1498 mm in height, and a wheelbase of 3210 mm. 2. The BMW facelifted 730 is equipped with a 4.4T twin-turbocharged engine, delivering a maximum power of 390 kW and a maximum torque of 750 Nm. It features a front-engine, four-wheel-drive layout, with a double-wishbone independent front suspension and a multi-link independent rear suspension.

9

3

Share

What does the 'A' symbol in a car mean?

The 'A' symbol represents the auto start-stop function. There is an auto start-stop indicator light on the car's dashboard, as well as an auto start-stop switch inside the vehicle. Both the indicator light and the switch feature the letter 'A'. Below is relevant information: 1. Many modern cars are equipped with the auto start-stop function, which can reduce exhaust emissions and save fuel. Cars with this function have an indicator light on the dashboard. If the auto start-stop system is functioning properly, the indicator light is usually green. If the system is not working correctly, the indicator light typically turns yellow or red. 2. Many car enthusiasts worry that the auto start-stop function may harm the vehicle, but there is no need for concern. The auto start-stop function only activates when the engine coolant reaches normal operating temperature and the battery has sufficient charge. The primary purpose of the auto start-stop system is not just to save fuel but to reduce exhaust emissions. With environmental protection becoming increasingly important, major automakers are employing various methods to minimize vehicle emissions.

18

2

Share

Can charging piles be installed by oneself?

Charging piles can be installed by oneself. The following are the installation steps for new energy vehicle charging piles: 1. Contact the property management company to determine the community's charging pile installation policy: Currently, the general requirement for installing a charging pile is to have a privately owned parking space. Some properties, due to being built earlier, may not be suitable for installing charging piles. If additional technical equipment is required for installation, it is essential to communicate with the property management in advance. 2. Inspect your parking space: This inspection refers to the owner personally conducting an on-site inspection. This step is very important for cost savings. Generally, there are many power distribution rooms in a community, and the owner should choose one that is close to the parking space, which can save a lot of costs during installation. 3. Provide relevant materials: Submit copies of your ID card, proof of parking space ownership (which can be issued by the property management), and a written consent from the property management to the staff. 4. On-site inspection: The power company's engineer will notify the charging pile company. At that time, the property electrician, charging pile company, power company, and the owner must all be present to determine the final construction plan. 5. Installation: After the construction plan is finalized, the installation process begins. Depending on the conditions of each community and the location of the garage, the construction time varies. Some installations may take only 2 hours, while others may require a whole day to complete. 6. Inspection: After the construction is completed, the charging pile company will report to the power company, which will then conduct an on-site inspection. The power company will produce the corresponding electricity card, and the owner can collect it from the power supply bureau.

20

4

Share

Can You Wax a Car After Crystal Coating?

You can wax a car after crystal coating. Here are the reasons why waxing is possible after crystal coating: 1. Crystal coating itself does not have waterproofing functionality; it only forms a relatively hard film on the surface of the car paint. Waxing, however, can provide a waterproof effect to the car paint. It's important to note that crystal coating has hydrophobic properties, which are sufficient for handling general rainy conditions. Unless the weather is extremely harsh, there is no need to wax the car after crystal coating. 2. Of course, if the crystal coating wears off, it's best to reapply the coating or wax the car. After all, minor scratches are inevitable over time, especially for those who frequently park their cars outdoors. Without proper protective measures, the car paint can become noticeably scratched over time.

2

1

Share

How to Use Cruise Control on the New Sagitar?

Here is how to use the cruise control on the New Sagitar: 1. The cruise control switch is located on the turn signal lever below the left side of the steering wheel. Press the power button to activate the cruise control system, and the cruise control indicator light on the instrument panel will illuminate. 2. Accelerate to your desired speed, press the SET button, and release the accelerator pedal to lock the speed at the current rate. During cruise control, you can fine-tune the speed using the 'RES+' and 'SET-' buttons. Here is some additional information: 1. Once cruise control is activated, the vehicle will maintain the speed set by the driver without the need to press the accelerator pedal, allowing the car to travel at a constant speed. Additionally, you can adjust the speed, pause, or cancel the function using the control switch. The cruise control system not only reduces fatigue during long-distance driving but also minimizes unnecessary speed fluctuations, thereby saving fuel. 2. Cruise control is used to maintain a set speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and driving resistance to keep the vehicle at the preset speed without requiring throttle input.

10

3

Share

Solutions for Dashboard Malfunction

Solutions for dashboard malfunction are as follows: 1. Poor contact between the instrument cluster assembly and input signals, or aging plastic components causing poor contact. Try replacing the aged plastic parts of the instrument cluster assembly. 2. The car dashboard is a rigid panel or structural component used to mount instruments and related devices. It can be categorized by type into screen-style dashboards, frame-style dashboards, channel-style dashboards, and cabinet-style dashboards. 3. There are many indicator lights on the car dashboard, so pay close attention to various warning lights: engine fault, airbag, coolant temperature, ABS, seatbelt, car battery, engine oil, fuel level, door ajar, brake disc, parking brake, turn signal, high beam, washer fluid, fog light, position light, etc.

13

5

Share

Can You Refuel Without Turning Off the Engine?

Where is the BMW 730 Air Filter Located?

What does the 'A' symbol in a car mean?

Can charging piles be installed by oneself?

Can You Wax a Car After Crystal Coating?

How to Use Cruise Control on the New Sagitar?

Solutions for Dashboard Malfunction

What material is the Volvo S90 body made of?

What transmission is used in the Bestune T77?

How to Transfer an Out-of-Town Driver's License Back to Local?

What are the causes and solutions for car air conditioning not cooling?