Can you refuel at every gas station with Tuanyou?

2 Answers
VanPhoebe
07/24/25 1:09pm
Tuanyou does not allow refueling at every gas station. Below is relevant information about gas stations: Introduction to gas stations: A gas station is a retail facility that provides services for cars and other motor vehicles, selling gasoline and engine oil, typically for refueling with fuel oil, lubricants, etc. Precautions at gas stations: Due to the flammable, explosive, volatile, leak-prone, and static-prone nature of petroleum products sold at gas stations, safety is the top priority. Open flames are strictly prohibited at gas stations, as are any operations that may generate sparks. It is forbidden to add gasoline to a car's carburetor or oil drums. All vehicles must turn off their engines before refueling, and any hazardous materials are strictly prohibited from entering the station.
Was this review help?
8
1
Share
SanIsabella
08/11/25 7:12am
Hi, this is a topic I often discuss with friends. As someone who frequently drives long distances, I rely quite a bit on platforms like Tuanyou for refueling. From my personal experience, Tuanyou isn’t usable at every gas station—it only partners with specific chains, like Sinopec or some private stations I often see, but small or independent stations usually aren’t supported. I’ve checked with the Tuanyou app, and its coverage is better in urban areas; in more remote locations, it might be lacking. So, I suggest checking the map feature before heading out to avoid arriving only to find it doesn’t work. This service is indeed convenient and saves money, but the coverage isn’t complete, so it’s good to have a backup fuel card ready to avoid being stranded. By the way, Tuanyou often runs promotions offering discounts on fuel. I’ve used it for years and find it generally reliable, just don’t expect it to cover everywhere.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is the method to start on a slope without stalling?

The method to start on a slope without stalling is: 1. Shift the gear to neutral, pull the handbrake tightly to ensure the vehicle does not roll backward; 2. Press the clutch pedal all the way down with the left foot, shift into 1st gear, and hold the handbrake with the right hand; 3. Slowly release the clutch pedal with the left foot until the semi-engaged state, wait until the vehicle shows signs of shaking and moving forward, then hold this position—do not continue to lift the clutch pedal to prevent stalling—and slowly press the accelerator pedal with the right foot. When the vehicle moves forward, release the handbrake completely with the right hand; 4. Continue pressing the accelerator with the right foot to accelerate uphill. During the starting process, avoid pressing the accelerator for too long in the semi-engaged state. The accelerator will drive the vehicle forward, preventing rolling backward and stalling. Release the clutch pedal and press the accelerator to start smoothly.
3
2
Share

How to Reduce Carbon Deposits in Cars?

Methods to reduce carbon deposits in cars include: 1. Regular car maintenance and oil changes; 2. Cleaning the car's air filter; 3. Timely replacement of spark plugs; 4. Cleaning the throttle body; 5. Avoiding aggressive acceleration and minimizing sudden braking; 6. Regular replacement of the fuel filter. Causes of carbon deposits in cars are: 1. Short driving durations and low speeds; 2. Use of low-grade gasoline; 3. Poor sealing of engine valve oil seals and piston rings; 4. Oil vapor in the crankcase ventilation system causing carbon deposits; 5. Spark plug power cut when the car is turned off.
18
2
Share

What are the reasons for the occasional failure to start in Haima Premacy?

Introduction to the reasons for the occasional failure to start in Haima Premacy: 1. Dead battery: Sometimes you may find that the car cannot start normally in the morning, which is likely because the trunk was not completely closed, causing the trunk light to stay on and drain the battery. 2. Spark plug failure to ignite: Spark plugs themselves are prone to damage, and short circuits in high-voltage lines can also cause spark plugs to fail to ignite. Another reason is the use of poor-quality spark plugs, which can lead to failure to start normally. 3. Starting circuit malfunction: When starting, there is only a slight "click" sound and no further response, which is caused by a stuck starting relay. In this case, simply pressing the tail of the electromagnet to force it forward can connect the starting circuit, thereby enabling the engine to start.
14
0
Share

What does Mazda6 DSC mean?

DSC refers to the Dynamic Stability Control system in Mazda vehicles. More details about DSC are as follows: 1. Function of DSC: This system automatically controls the vehicle when it detects skidding during driving. By coordinating with TCS and 4W-ABS, it optimally controls engine output and four-wheel braking force to effectively suppress vehicle skidding. Even when cornering on slippery roads or avoiding obstacles in emergency situations, it helps maintain stable vehicle posture for safe driving. 2. DSC warning light: When the DSC warning light on the dashboard illuminates, it indicates a possible malfunction in the stability control system, and DSC is not operational. There are various reasons for the DSC warning light to come on, including sensor or wiring faults, deviations in signals from the electronic control unit, or accidental pressing of the DSC off button.
1
5
Share

What is the fuel consumption of the 6th generation Camry?

Camry's actual fuel consumption is approximately 7.5 liters per 100 kilometers in urban areas and about 6 liters on highways. Here are the specific details: 1. Rapid acceleration and sudden braking: These actions can increase fuel consumption by 5%~30% compared to normal driving. It is essential to avoid sudden braking or acceleration while driving, as it not only raises fuel consumption but also accelerates vehicle wear. 2. Prolonged idling: Many drivers often let the vehicle idle for a while after starting to warm it up. Since the car consumes energy as long as it is running, this only increases fuel consumption. 3. Vehicle maintenance: Many drivers overlook the importance of car maintenance. Poor maintenance can also lead to increased fuel consumption. For example, a dirty air filter or deteriorated engine oil can cause incomplete fuel combustion, resulting in higher fuel consumption.
9
0
Share

How to Retake the Driving Test After License Revocation?

License revocation retake method: After the driver's license is revoked, reapplying requires retaking the test, which is treated as applying for a motor vehicle driver's license for the first time. The applicant needs to bring their identity proof and a medical condition certificate issued by a county-level or higher medical institution (or a military medical institution at the regimental level or above) to the vehicle management office to fill out an application form. Then, the office will organize and arrange the test. A driver's license is a document that motor vehicle drivers are legally required to obtain. By learning to drive a motor vehicle and mastering basic knowledge of traffic regulations and driving skills, one can pass the test and obtain the motor vehicle license. The driver's license allows for nationwide testing and taking different test subjects in different locations.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.