Can You Press the Clutch When Making a U-Turn in First Gear During Subject Three?

1 Answers
GriffinDella
07/30/25 7:27am
You can press the clutch when making a U-turn in first gear during Subject Three. Below is an introduction to the related content of the Subject Three exam: 1. Starting: Vehicle preparation, starting, and driving in a straight line. 2. Speed control: Gear shifting operations, changing lanes, and pulling over. 3. Turning: Going straight through intersections, turning left at intersections, and turning right at intersections. 4. Passing designated areas: Crossing pedestrian crossings, passing school zones, and passing bus stops. 5. Vehicle control: Meeting oncoming vehicles, overtaking, making U-turns, and driving at night. 6. Safe and civilized driving knowledge test content: Mastery of safe driving operation requirements under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
Was this review help?
10
0
Share
More Forum Discussions

How to reset the tire pressure warning on the Soueast DX5?

Soueast DX5 tire pressure warning needs to be reset as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. There are generally three reasons for tire pressure warnings: Abnormal tire pressure: The warning usually triggers when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tire should be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is installed inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, the only solution is to replace it with a new one.
4
2
Share

How often should the gear oil of an electric tricycle be changed?

Electric tricycles should have their gear oil changed every three months, which is more conducive to motor maintenance. The following is a specific introduction about the types of vehicles: Vehicles: refer to motor vehicles and non-motor vehicles. Motor vehicles: refer to wheeled vehicles driven or towed by power devices, used for carrying people or transporting goods on the road, as well as for specialized engineering operations. Non-motor vehicles: refer to means of transportation driven by human or animal power on the road, as well as means of transportation such as disabled motorized wheelchairs and electric bicycles that are driven by power devices but have a maximum design speed, empty vehicle mass, and dimensions that comply with relevant national standards.
17
0
Share

What is the reason why the electric tricycle does not move after getting wet?

Tricycle does not move after getting wet mainly because the power-off system circuit on the electric vehicle controller fails due to water ingress, causing the system to malfunction and the vehicle to stop moving. It needs to be towed for repair. Here are some precautions for using a tricycle: Good maintenance: Do not let the electric tricycle suffer accidental damage, such as not letting water submerge the motor center or controller, always unlock the vehicle before starting, turn off the power when getting off, keep the tires properly inflated, avoid prolonged exposure to sunlight in summer, avoid storing in high-temperature or corrosive environments, and ensure the brakes are adjusted to the right tightness. Frequent charging: For lead-acid batteries, develop the habit of charging on the same day of use. No matter how far you ride the electric bicycle each day, always charge it fully. Never wait until the battery is completely drained before charging, to avoid "deep discharge" which shortens the battery life.
8
4
Share

What type of driver's license is required for electric motorcycles?

Riding an electric motorcycle requires national 3C mandatory certification. The following are specific details about riding electric motorcycles: Age: Applicants for electric bicycle registration must be at least 16 years old and under 70 years old. Registration: Apply for registration within 15 days from the date of purchase. Applicants must present the vehicle for inspection and submit the owner's identity proof, proof of vehicle origin, and the vehicle's factory certificate of conformity to the public traffic management department for registration. Applicants for temporary permits for non-compliant electric bicycles must also submit a one-year compulsory traffic accident liability insurance certificate.
3
4
Share

What is the voltage of an electric vehicle battery?

Electric vehicle battery voltage is 336V, 384V, and electric bus battery voltage is 580-600V. The following is a detailed introduction about electric vehicle batteries: Types: Electric vehicle batteries are divided into two major categories, storage batteries and fuel cells. Storage batteries: Suitable for pure electric vehicles, including lead-acid batteries, nickel-based batteries, sodium-sulfur batteries, secondary lithium batteries, and air batteries. Fuel cells: Specifically for fuel cell electric vehicles, including alkaline fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells, proton exchange membrane fuel cells, and direct methanol fuel cells.
15
5
Share

What are the regulations for electric forklift management?

Below is a detailed introduction to the electric forklift management system: Forklift Operator Requirements: Operators must undergo training and obtain a forklift driver's license before starting work. Driving under the influence of alcohol is prohibited, and operators must dress neatly. Pre-driving Inspection: Check that the lights, horn, and front/rear mirrors are in good condition, and inspect the fuel system and engine. Loading and Unloading Regulations: Do not stack goods too high to avoid obstructing vision and causing accidents. Do not transport loose goods directly to prevent tipping; secure them firmly before transportation. Parking Requirements: Park in designated level areas and return the control lever to its original position.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.