Can You Press the Brake in Subject 2?

2 Answers
Evans
07/28/25 3:33pm
Subject 2 allows the use of brakes. During the Subject 2 test, there are specific situations where braking is required, such as during the hill start and stop, parallel parking, and reversing into a parking space. Apart from these points, stopping midway is not permitted in other test items, meaning the speed cannot drop to zero. Below is additional information about Subject 2: 1. Subject 2: Also known as the small road test, it is part of the motor vehicle driving license assessment and refers to the field driving skill test. The test includes five mandatory items: reversing into a parking space, parallel parking, hill start and stop, right-angle turn, and curve driving. 2. Basic Operations: Subject 2 requires candidates to master fundamental driving techniques and possess basic vehicle control abilities. They must be proficient in basic methods of driving on the field and internal roads, capable of properly using vehicle controls, accurately controlling the vehicle's spatial position, and precisely managing the vehicle's position, speed, and route. 3. Failing Subject 2: Applicants need to pay a re-examination fee at the vehicle management office first. According to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," each subject can be taken once, and if failed, a re-examination is allowed once.
Was this review help?
19
1
Share
VonRuth
08/11/25 10:57pm
Of course you can press the brake during the Subject 2 driving test. As someone who teaches driving every day, I must say braking is an essential skill. When performing the slope定点停车 (fixed-point parking on a slope), you must press the brake to stop the vehicle steadily at the designated spot to avoid rolling back and losing points. For 倒车入库 (reverse parking) or 侧方停车 (parallel parking), gently tapping the brake to control speed is crucial – going too fast may cause you to hit the lines and fail. Remember, pressing the brake too hard may stall the engine, resulting in point deductions from the examiner, so operate smoothly. I always emphasize that students should practice their braking sensitivity regularly – place your left foot on the clutch and gently press the brake pedal with your right foot, adjusting speed according to the test item. This isn’t about randomly pressing the pedal but improving control. Think about safe driving – Subject 2 tests the basics, so don’t underestimate the importance of braking. Overall, it helps you pass more steadily. Be prepared.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Where is the air filter of Dongfeng Fengxing S500 located?

The air filter of Dongfeng Fengxing S500 is located under the front windshield. Here is some relevant information: 1. How often the car's air filter needs to be replaced actually depends on the usage situation. Generally, for urban family cars, it can be replaced every six months or once a year. After being used for a period of time, the activated carbon filtration function in the air filter will diminish, so you can buy a compatible air filter from a 4S store for replacement. 2. The air filter can ensure clean air in the passenger compartment without breeding bacteria, creating a healthy environment; it can effectively separate solid impurities such as dust, core powder, and grinding particles in the air; it can effectively intercept pollen, ensuring that drivers and passengers do not have allergic reactions that affect driving safety.
20
5
Share

How to Calculate 30 Days for Subject Three?

Subject One's 30-day period starts from the day after taking the exam, and then adds 30 days. Below are the specific procedures for canceling a Subject Three appointment: 1. Cancel via the Driving Test Center Information Platform: The platform allows cancellation of Subject Three appointments, with the latest cancellation time being before 12:00 noon on the day before the scheduled exam. 2. Cancel at the Vehicle Management Office: To cancel a Subject Three exam, the applicant must personally bring their ID card and a copy to the office. On the blank space of the ID copy, write "I voluntarily cancel the Subject Three exam scheduled on xx/xx/xxxx at xx driving school," and sign with name, contact information, and date. 3. Cancel via a Proxy at the Driving Test Center: If the applicant is unable to come in person, the proxy must bring their own ID card and copy along with the applicant's. In addition to the above content, the proxy must also sign their name.
7
2
Share

How long does it take to learn Subject 2?

Subject 2 generally takes about 12-22 days to learn. Below is an introduction to the knowledge about the Subject 2 test: 1. Definition: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve) (some regions also include a sixth item, high-speed toll collection). 2. Reversing into garage tips: Control the speed steadily: Keep the speed at a stable and very slow state. (Release the clutch slowly and steadily, avoid sudden lifting and continuous pressing and lifting). Correct steering technique: The method of turning the steering wheel should be correct, otherwise, you will not be able to control the direction of the car's movement, not knowing how much to turn the steering wheel back or whether it has already been straightened.
4
1
Share

What is a 4x4 vehicle?

4x4 indicates that the vehicle has 4 wheels, all of which are drive wheels. Here is some information about four-wheel drive vehicles: 1. Definition: A four-wheel drive vehicle is one with front and rear differential-linked four-wheel drive. Since the engine power is transmitted to all four wheels, all four wheels can provide traction. In a regular two-wheel drive vehicle, if one of the drive wheels slips, the other drive wheel will also lose power. 2. Drive configuration: Drive configuration refers to the arrangement of the engine and the number and position of the drive wheels. Most vehicles have two rows of wheels, front and rear. The wheels that are directly driven by the engine to propel (or pull) the vehicle forward are the drive wheels. The most basic classification is based on the number of drive wheels, which can be divided into two main categories: two-wheel drive and four-wheel drive.
16
0
Share

What causes the engine oil light to come on but go off when accelerating?

The engine oil light coming on but going off when accelerating may be due to using the wrong oil viscosity grade. Below is an introduction to engine oil knowledge: 1. Introduction: Engine oil, also known as engine lubricant (with a density of approximately 0.91×10³ kg/m³), serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It's often referred to as the "blood" of automobiles. Engine oil consists of two components: base oil and additives. The base oil is the primary constituent that determines the fundamental properties of the lubricant, while additives compensate for and enhance the performance shortcomings of the base oil, providing additional beneficial characteristics. These additives form a crucial part of engine oil. 2. Requirements: As a type of machinery, engines share common lubrication requirements with general mechanical equipment, such as appropriate viscosity and certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. However, being specialized machinery, engines also have unique lubrication requirements that differ from conventional equipment.
12
3
Share

What is the normal voltage output of a car alternator?

Car alternators typically produce a voltage between 13.5-14.5V. Here's some knowledge about car alternators: 1. Introduction: The car alternator serves as the main power source for vehicles. Its function is to supply power to all electrical devices (except the starter) while simultaneously charging the battery when the engine is running normally. Based on the three-phase stator winding of a conventional AC generator, it increases the number of winding turns with additional lead wires and adds a three-phase bridge rectifier. At low speeds, it outputs through the series connection of the original winding and additional winding, while at higher speeds, it only outputs through the original three-phase winding. 2. Classification: Automotive generators can be divided into DC generators and AC generators. Since AC generators outperform DC generators in many aspects, DC generators have been phased out.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.