Can You Pause During Reverse Parking?

Will I Get Penalized for Driving with Daytime Running Lights at Night?

No penalty, but it poses safety hazards. The function of daytime running lights: Using daytime running lights during daytime driving can reduce traffic accidents by 12.4% and lower the probability of fatal crashes by 26.4%. In reality, daytime running lights have indeed improved road safety, especially in areas with heavy fog, smog, or poor visibility, which are common in some parts of our country. Hazards of using daytime running lights at night: It is not advisable to use daytime running lights at night. On one hand, unlike headlights, daytime running lights do not provide illumination. If you don't turn on your headlights in dark areas, it will not only affect oncoming and preceding vehicles, but the seemingly bright daytime running lights will make it appear as if no lights are on for those inside the car. If the purpose of using daytime running lights at night is to show off, it is irresponsible to both yourself and others. Proper use of vehicle lights ensures driving safety.

10

5

Share

Why Doesn't the Manual Transmission Gear Shift Feel Smooth?

There are reasons why the gear shift in a manual transmission car doesn't feel smooth. Transmission Factors: When shifting gears in a manual transmission vehicle, it might be due to insufficient or deteriorated transmission oil, a design issue with the transmission, problems with the clutch pressure plate, or wear on the bottom gear synchronizer ring. Human Factors: If the operation is incorrect, the gear shift may also lack a smooth feel. For example, incorrect timing during gear shifting or not fully depressing the clutch pedal. Gear Shifting Principle: During gear shifting, the input shaft changes, transmitting through the intermediate shaft, and finally outputting to the differential via the output shaft. When the differential moves, the tires move accordingly. Solutions: Inspect and repair the transmission, add appropriate engine oil, and drive frequently to break in the vehicle for optimal driving performance.

17

5

Share

What Does It Mean When the Engine Warning Light Comes On?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the warning light. Fuel/oil quality issues: Failure to use fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor air-fuel mixture combustion: This can result in engine carbon buildup or knocking. When detected by oxygen sensors and reported to the ECU, the warning light will illuminate. Causes include spark plug failure, ignition coil issues, fuel pump malfunction, or fuel line blockages. Turbocharger problems: Issues with intake boost pipes or turbochargers (especially turbocharger damage) may trigger the light, accompanied by symptoms like oil leaks, excessive oil consumption, power loss, metallic noises, or blue/black exhaust smoke. Air intake issues: Blocked engine pipes due to intake problems (often caused by dirty air filters not cleaned regularly) can activate the warning light. Exhaust system faults: Problems with post-oxygen sensors, catalytic converters, exhaust camshafts, or bearings (most commonly catalytic converter failure) may illuminate the light. Causes include using leaded gasoline, lead/silicon-based lubricant additives, physical damage to the converter, or fuel system issues. Anti-theft system malfunction: If the electronic anti-theft system fails or doesn't match the engine ECU, it may prevent normal engine operation while activating the warning light. When the engine light comes on, follow these steps: First check if the engine operates normally. If there's shaking, black smoke, etc., avoid restarting (never restart if the red warning light is on). If restart is possible, wait 5-10 minutes after turning off, then power on without pressing brakes (press start button or turn key halfway to 'ON' position). After 5-10 seconds of self-check, observe if the warning light turns off. If the light persists, visit a service center immediately. Technicians can read fault codes with diagnostic tools for targeted repairs.

11

3

Share

Why does the engine fault light come on after a jump start?

After a jump start, the engine fault light comes on because the car battery is low on power. Even after jump-starting the car battery, many electronic control components on the engine still lack sufficient voltage, which can trigger the engine fault light. If no other issues are found, visiting a 4S store for decoding can resolve the problem. Locate the batteries of both vehicles: First, locate the batteries of both vehicles and ensure the rescue vehicle is turned off. Connect the jumper cables: Use jumper cables to connect the positive terminals of both vehicle batteries. After connecting, attach one end to the negative terminal of the rescue vehicle's battery and the other end to the engine block of the vehicle being rescued. Start the rescue vehicle: After ensuring the jumper cables are correctly connected, start the rescue vehicle first, then start the vehicle being rescued. Disconnect after success Once the rescued vehicle starts successfully, the jumper cables can be disconnected.

11

2

Share

What Are the Must-Have Items for Motorcycles?

Motorcycle must-have items include a motorcycle helmet, riding suit, and riding boots. Motorcycle Helmet: It is a head protection device designed for motorcycle riders and passengers. The primary purpose of this helmet is to protect the rider's head during impacts, preventing or reducing injuries and even saving the rider's life. Riding Suit: Common riding suits are generally categorized into road riding suits, adventure suits, and racing suits. A riding suit can cover up to 90% of the rider's body. The two most important factors when choosing a riding suit are comfort and fit. Only when it fits properly can it effectively protect the rider in the event of a fall. Otherwise, it may easily shift during a crash, reducing its protective capabilities. Riding Boots: In the event of an accident, riding boots can protect the lower legs, ankles, and toes, providing comprehensive foot protection.

11

2

Share

What Causes High-Speed Shimmy in Small Cars?

Generally, high-speed shimmy is caused by factors related to low-speed shimmy; unbalanced repaired front tires, excessive rim runout or deformation of front wheels; loose installation of drivetrain components, bent drive shafts, or improper dynamic balance; failed shock absorbers, deformed frames, loose rivets, deformed front axles, or inconsistent stiffness of front leaf springs. Shimmy phenomenon: High-speed shimmy occurs at higher driving speeds and is speed-dependent. Within this speed range, even minor road impacts (as some impact is inevitable) can cause the front wheels to sway left and right. The shimmy disappears when the speed is below or above this range. Drivetrain faults: Jack up the drive axle, place safety chocks on the front wheels, start the engine, and gradually shift to higher gears until the drive wheels reach the shimmy speed. If shimmy occurs, it indicates a drivetrain fault. If not, the issue lies in the steering axle.

10

2

Share

Can You Pause During Reverse Parking?

Will I Get Penalized for Driving with Daytime Running Lights at Night?

Why Doesn't the Manual Transmission Gear Shift Feel Smooth?

What Does It Mean When the Engine Warning Light Comes On?

Why does the engine fault light come on after a jump start?

What Are the Must-Have Items for Motorcycles?

What Causes High-Speed Shimmy in Small Cars?

What is the difference between learning to drive manual and automatic?

Can You Drive the Car Away on the Same Day of Purchase?

What Brand is Voyah?

Where is the motorcycle air filter located?