···
Log in / Register

Can You Park on a Solid White Line by the Roadside?

4 Answers
MacMaddox
09/05/25 3:41am

Whether you can park on a solid white line by the roadside depends on the presence of other no-parking signs, meaning you need to consider them together. Basis for roadside parking: A solid white line alone does not indicate whether parking is allowed. Areas with a solid yellow line or yellow curb markings prohibit parking. Some areas may have designated paid parking spaces, allowing parking during specified times. No-parking situations: Areas with yellow-painted curbs prohibit vehicle parking. Some road sections may have no-parking signs, which naturally do not allow parking, as well as certain public areas where parking is not permitted.

Was this review help?
15
1
Share
DiJourney
09/17/25 4:18am

I've been driving for over a decade. I remember once when I temporarily parked by the roadside and crossed a solid white line, resulting in an immediate 200-yuan fine. The officer explained that solid white lines are road markings, usually indicating lane boundaries or special zones where parking is prohibited to prevent traffic congestion or accidents. Now I always tell my friends: never park next to any solid lines on the roadside—they don't directly equate to parking spaces and require checking no-parking signs. Before parking, I always check my surroundings to ensure no solid lines are obstructed, as fines are minor compared to inconveniencing others. In practical driving, such violations can accumulate points, and losing your license would be worse. Developing good habits—only parking in marked spaces—makes driving safer, simpler, and hassle-free, cutting road risks by more than half.

Was this review help?
13
2
Share
Expand All
Journey
10/31/25 4:49am

As a regular mom who often drives kids to and from school, I pay close attention to parking rules to avoid accidents. Never park by the solid white line on the roadside—it's a traffic marking defining lanes or pedestrian zones. Parking there blocks drivers' views or causes trouble. I've checked the regulations: solid lines mean no crossing boundaries, and parking there violates rules, risking tickets or rear-end collisions. Before each trip, I always look for safe spots like vacant spaces or areas outside no-parking zones marked by yellow lines. Breaking rules isn't just personal—it endangers others, especially during school rush hours. Keeping the family safe is top priority, so I'd rather circle for a spot than risk convenience.

Was this review help?
7
0
Share
Expand All
TimothyAnn
12/14/25 4:57am

When walking to work, I often encounter drivers illegally parking on solid white lines, almost causing accidents. Solid lines indicate fixed lanes or safety zones, and parking there compresses space and creates hazards. Last time, a car blocked the area, forcing me to detour—how dangerous! The police have stated that this is prohibited, with violators facing fines or towing. Similar situations occur frequently in daily life. I suggest drivers consciously avoid parking in solid line zones. Designated parking areas have clear markings—why risk breaking the rules? Respecting traffic regulations protects everyone. Don’t overlook this simple principle.

Was this review help?
12
2
Share
Expand All
More Forum Discussions

What procedures are required for changing the color of a car?

The procedures required for changing the color of a car are: 1. Go to the vehicle inspection station to inspect the vehicle and pre-record the information; 2. After queuing up to get a number in the business hall, submit the required documents at the acceptance window: the application form for vehicle modification registration, the identity proof and copy of the vehicle owner, the vehicle registration certificate, the driving license, and a set of chassis number rubbings; 3. Pay the relevant fees at the payment window; 4. Collect the documents at the license and certificate window. Precautions for changing the color of a car include: 1. The body color cannot be the same or similar to that of special vehicles; 2. The area covered by color-changing film cannot exceed one-third of the body area; 3. The body color cannot exceed three types. Before changing the color, you can consult the vehicle inspection station to confirm whether the selected color is allowed for modification. After receiving a positive response, you can proceed with the color change and then schedule an appointment to complete the modification registration procedures.
6
2
Share

How to Remove the Air Filter of Mercedes-Benz R350?

Method for removing the air filter of Mercedes-Benz R350: First, use a screwdriver to pry open the clips on the inner side of the glove box. After opening the glove box, unclip the fasteners of the air filter cover plate. Once the cover plate is removed, the filter element can be seen and taken out. After removal, clean it by blowing off the dust or replace it directly. Taking the Mercedes-Benz R-Class 2006 R350 4MATIC as an example: It is an MPV launched by Mercedes-Benz (imported) with a length, width, and height of 5157mm, 1922mm, and 1661mm respectively, and a wheelbase of 3215mm. It is equipped with a 3.5L naturally aspirated engine, with a maximum power of 200kw, matched with a 7-speed automatic transmission.
1
3
Share

How Many Kilometers Should a Car's Fuel Filter Be Replaced?

Generally, it is recommended to replace the fuel filter every 20,000 kilometers, but this depends on the road conditions and fuel quality. Below is a detailed introduction to the car's fuel filter: 1. The function of the fuel filter is to remove water and impurities from the gasoline. 2. When the engine is running, fuel is drawn by the fuel pump through the inlet pipe into the sediment bowl of the filter. As the volume increases and the flow rate decreases, heavier water and impurity particles settle at the bottom of the bowl, while lighter impurities flow with the fuel towards the filter element. Clean fuel then permeates through the fine pores of the filter element into its interior and flows out through the fuel pipe. 3. If the fuel filter is too dirty or clogged, the main symptoms include: slow or no response when accelerating, difficulty starting the car, and sometimes requiring 2-5 attempts to start the engine. In such cases, the fuel filter should be replaced.
9
0
Share

What is the penalty for driving in the wrong direction on the highway?

Driving in the wrong direction on the highway results in a one-time deduction of 12 points and a fine. Penalties for driving in the wrong direction on the highway: According to the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle without following overtaking or yielding regulations, or driving in the wrong direction, results in a deduction of 3 points; driving a motor vehicle on the highway while reversing, driving in the wrong direction, or making a U-turn across the central divider results in a deduction of 12 points. Additionally, motor vehicle drivers who violate road traffic safety laws and regulations regarding road usage may receive a warning or a fine. Precautions for driving on the highway: Maintaining a safe following distance is a prerequisite for ensuring the safety of both vehicles. Unless driving a large vehicle, it is advisable to stay as far away as possible from large vehicles when driving on the highway. Change lanes correctly. Avoid crossing multiple lanes at once, and always observe traffic conditions carefully before changing lanes, using turn signals and honking to alert other vehicles. The emergency lane is reserved for vehicles in need; unless under special circumstances, it should not be used.
6
2
Share

How to Solve the "Ticking" Sound in Focus Engine?

Ford Focus engine making a "ticking" sound may be caused by poor oil quality. Additionally, the "ticking" noise is generally from the valve or fuel injector. The causes and solutions for valve-related noises are as follows: 1. Worn or broken valve spring seats may cause noise—replace the valve spring in this case; 2. Excessive or inconsistent valve clearance can lead to noise—adjust the clearance to resolve the issue; 3. Worn or misaligned valve adjustment screws or loose lock nuts may also produce noise—adjust the screw tightness to fix the problem; 4. Too high or too low oil level in the crankcase can cause noise—check the engine oil level; 5. Worn valve guides may also result in noise—inspect or replace the valve guides; 6. Dirty lifters can cause noise—clean the hydraulic lifters; 7. Out-of-round valve seats or valve faces—grind the valve and valve face; 8. Incorrect oil viscosity selection may also cause noise—switch to a higher viscosity grade oil.
16
5
Share

What is the One-Button Start Smart Key System?

The One-Button Start Smart Key System consists of two parts: keyless entry and one-button start, with the premise of identity recognition and authentication. A switch is installed on the car handle, and as long as you approach the car within about 1 meter, the door lock will automatically open. Keyless entry uses secure identification and authentication technology, which is a contactless automatic identification technology. Each chip is unique, with very high security performance, and the chip cannot be duplicated, making it a secure car anti-theft system. Functions of the One-Button Start Smart Key System: 1. When the owner turns off the engine and leaves the car, simply close the car door, and the door lock will automatically lock and enter the anti-theft state; 2. If any side door or tailgate is not properly locked when leaving, the vehicle will automatically emit a warning sound to remind you to close the door properly.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.