Can You Open the Hood and Directly Rinse the Engine with Water?

1 Answers
Juniper
07/29/25 2:29pm
You should not rinse the engine compartment with water directly. Here are the reasons: 1. Water can easily reach the generator, which may cause it to malfunction or even become irreparable. It is advisable to cover the generator, distributor, and brake fluid reservoir with cloth or plastic bags, especially the generator and distributor. 2. If the engine is hot, rinsing it with water can cause significant damage due to thermal contraction. The engine block may crack under sudden cooling. 3. There are many electrical wires in the engine compartment, and water exposure can lead to electrical issues and accelerate wire aging. If you must clean with water, ensure proper waterproofing of critical components. It is recommended to use compressed air for cleaning instead.
Was this review help?
1
0
Share
More Forum Discussions

Is the Corolla an A or B class car?

Corolla is a compact family sedan, belonging to the A-class category. The Corolla is an A-class sedan under Toyota, with a wheelbase of 2700mm, and dimensions of 4635mm in length, 1780mm in width, and 1455mm in height. The new Corolla comes equipped with two engine options: a 1.8L naturally aspirated engine and a 1.2L turbocharged engine. The model with the 1.8L naturally aspirated engine is the hybrid version. The 1.8L naturally aspirated engine in the Corolla delivers 98 horsepower and a maximum torque of 142Nm. This engine reaches its peak torque at 3600rpm and achieves maximum power at 5200rpm. This engine features VVT-i technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power output of 53kW and a maximum torque of 163Nm.
3
3
Share

Should the Fuel Tank Have Gas When a Car Is Parked for a Long Time?

When a car is parked for an extended period, the fuel tank should not be filled to capacity. Below is additional information regarding long-term vehicle storage: 1. Inflate tires adequately: Prolonged stationary parking may render tires unusable. The best way to prevent this is to periodically adjust the position of the tires during the parking period to distribute the continuous pressure on localized areas. Another method is to inflate the tires as much as possible before parking—the higher the tire pressure, the less the sidewall compression, resulting in reduced localized deformation after long-term parking. 2. Disconnect the battery to prevent power drain: Many drivers have experienced difficulty starting a previously normal vehicle after extended parking. While the battery automatically charges during regular driving, it still discharges when the vehicle is idle. However, since battery models, usage times, and types vary by vehicle, the rate of discharge differs. Therefore, it's essential to inspect your battery based on its specific condition.
16
5
Share

What does BSI mean in Peugeot cars?

Dongfeng Peugeot BSI refers to a fault in the interior body control unit, which can be checked with a computer diagnostic tool. Generally, the reset of Peugeot BSI is also known as initialization. If you need to perform this operation, you will need Peugeot's dedicated diagnostic tool. The specific steps are as follows: Select the vehicle model and enter vehicle identification; input the DAM number (taking the Peugeot 307 as an example, the DAM number is located on the inner side of the right front fender), test by control unit; select the central switch unit BSI, connect the OBD diagnostic head, turn on the ignition switch, and choose initialization settings. Resetting the Peugeot BSI requires connecting to a fault diagnostic tool. If your Peugeot BSI needs resetting, it is recommended to take the car to a 4S shop for professional handling rather than attempting to do it yourself.
20
0
Share

Can a C1 driver's license drive a light van?

C1 driver's license can drive light vans with blue license plates. The following is relevant information about the C1 driver's license: 1. Introduction: The C1 driver's license is one type of motor vehicle driver's license code. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. 2. Driving requirements: According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses', the driving scope of a C1 driver's license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special operation vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. According to this standard, a C1 license cannot drive vehicles with more than 9 seats. Vehicles that a C1 license cannot drive include: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery vehicles, trolleybuses, and trams.
17
1
Share

Button Instructions for the 2021 CR-V Fashion Edition

Here is a detailed introduction to the button instructions for the 2021 CR-V: 1. Center Console Buttons: Include the Vehicle Stability Assist (VSA), parking radar or image, internal/external air circulation, auto start-stop, and auto hold. 2. Door Buttons: Include the rear window lock button, exterior rearview mirror adjustment switch, and central locking button. 3. Roof Buttons: Include the sunshade switch, driver's reading light, front passenger's reading light, interior lighting switch, and sunroof switch. Here is additional information about the 2021 CR-V: 1. Body Dimensions: The length, width, and height are 4621mm, 1855mm, and 1679mm respectively, with a wheelbase of 2661mm. 2. Fuel Tank: The fuel tank capacity is 53L, and the maximum horsepower is 193hp.
7
0
Share

What Causes the Lack of Power and Jerking During Startup in the Cruze?

Here are the specific reasons for the lack of power and jerking during startup in the Cruze: 1. Clogged engine oil passages: The combustion of fuel, which is the power source of the engine, is determined by the ignition, air intake, and fuel injectors. If the air intake decreases, the ignition weakens, or the fuel injection reduces, the power output will be insufficient, leading to a jerking sensation. 2. Dirty transmission fluid: This can cause damage to the solenoid valves. If sludge accumulates in the transmission fluid and circulates within the transmission, blocking the oil passages in the valve body, jerking issues may arise. Over time, this can lead to a series of transmission problems such as overheating, harsh shifting, and slipping. 3. Break-in period: Mild jerking during driving is normal during the break-in period because the vehicle's power output and component engagement are not at their optimal levels. Additionally, the transmission control module has a self-learning mechanism that continuously adjusts oil pressure for smoother gear shifts.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.