···
Log in / Register

Can you make a U-turn on double yellow dashed lines? Will points be deducted?

3 Answers
DelJude
09/08/25 3:53am
Double yellow lines do not allow U-turns, while dashed lines permit U-turns. Making a U-turn on double yellow lines will result in penalties and point deductions for violating traffic regulations. Single solid yellow line: When a single solid yellow line is placed in the middle of the road, it is used to separate opposing traffic flows. However, it also indicates that vehicles are prohibited from crossing the line, driving over it, overtaking, or making U-turns to avoid traffic accidents. Solid and dashed yellow line: Solid and dashed yellow lines are typically painted in the middle of the road to separate opposing traffic flows. Vehicles on the side with the solid yellow line are prohibited from overtaking, crossing, or making U-turns. On the side with the dashed yellow line, vehicles are allowed to overtake, cross, or make U-turns provided it is safe to do so.
Was this review help?
14
2
Share
DeEzra
09/20/25 2:41am
I've been driving in the city for over a decade. The double yellow dashed line is a type of centerline in traffic markings. The dashed portion indicates that you can overtake or make a U-turn, provided there are no no-U-turn signs or traffic light restrictions. I often perform this maneuver on suburban roads—for example, after spotting the dashed line, I signal, slow down, check the oncoming lane to ensure it's clear, and then make the turn. Safety always comes first. If you force a U-turn at a solid line or violate restrictions in prohibited zones, you risk being caught by cameras, fined 200 yuan, and penalized with 3 demerit points. In real-world driving, road signs can be complex and variable. For instance, school zones or turning points at intersections might have hidden restrictions. I recommend novice drivers check navigation in advance or use traffic reminder stickers to develop good habits and avoid fines.
Was this review help?
8
2
Share
Expand All
DelReagan
11/03/25 3:04am
The double yellow dashed line in traffic rules represents the center line separating opposing lanes. The dashed side allows crossing, including U-turns, but it's essential to confirm there are no prohibiting markings or signal indications. I've studied the relevant regulations, and while U-turns are safe, the legal consequences can be severe. For example, making a U-turn in a prohibited area can result in a 3-point deduction and a 200-yuan fine, and it's also prone to causing accidents. When driving daily, remember to frequently check intersection signs and prioritize performing slow maneuvers in dashed-line sections. Driving safety relies on the accumulation of details, so it's advisable to regularly review the traffic manual to avoid unnecessary disputes.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Where is the air conditioning filter of the Livina located?

The air conditioning filter of the Livina is located under the dashboard, inside the decorative panel in front of the passenger seat. Poor maintenance of the air conditioning filter can lead to the accumulation of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, the air conditioning system may experience reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan. The Livina is a compact car designed by Nissan, primarily competing with models such as the POLO and Fit. The Livina has dimensions of 4249mm in length, 1695mm in width, and 1577mm in height, with a wheelbase of 2600mm.
19
1
Share

What is the minimum ground clearance of the Orlando?

The minimum ground clearance of the Orlando is 150mm. The determining factors for the Orlando's minimum ground clearance are as follows: 1. Actual vehicle load: The heavier the vehicle load, the smaller the minimum ground clearance. This not only increases the burden on the engine but also reduces the stability of the vehicle while driving. 2. Performance of shock absorber springs: When using aged or damaged shock absorber springs that do not meet performance requirements, the vehicle body may sag to some extent, potentially causing components near the shock absorber springs to be closer to the ground, thus reducing the minimum ground clearance. 3. Tire pressure: If the tire pressure is too low, the overall height of the vehicle will decrease, which also affects the minimum ground clearance.
13
5
Share

What is the most suitable ground clearance for a car?

Car ground clearance between 110 to 130mm is most suitable. The impact of car ground clearance is as follows: 1. The larger the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; 2. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when fully loaded and stationary, used to characterize the car's ability to pass over obstacles such as stones and stumps without collision. The smaller the ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
16
5
Share

How to Check Vehicle Inspection Time?

Methods to check vehicle inspection time: Look at the duplicate of the vehicle license. For example, if the "Inspection Valid Until April 2019" is indicated on the duplicate of the vehicle license, then the annual inspection date is three months before the inspection validity period (including the current month), meaning the annual inspection date is from February to April 2019. The vehicle annual inspection date is calculated by month, and processing the vehicle annual inspection in the last full month of the validity period is not considered overdue. Annual inspection is a mandatory test for every vehicle that has obtained an official license plate and vehicle license, which means an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation. Vehicle annual inspection can promptly eliminate potential safety hazards, urge the strengthening of vehicle maintenance, and reduce the occurrence of traffic accidents.
13
4
Share

How Much Horsepower Does a Motorcycle Have?

Generally, the power of a motorcycle is around 6–7 kW, equivalent to 8–9.5 horsepower. Additional Information: There is no specific standard for motorcycle horsepower, as it depends on how the bike is tuned. A well-tuned 150cc bike can reach speeds of 200 km/h, and the largest displacement motorcycles now reach up to 1600cc. Horsepower was originally defined by the French and Germans, but since the horses used to measure horsepower were smaller than average, an engine with 50 horsepower should not be imagined as 50 horses pulling the motorcycle—35 horses would be a more accurate comparison. The unit of horsepower is represented by (ps), a symbol first used by the Germans and still in use today.
2
2
Share

What to Do When There's Abnormal Noise During Low-Speed Braking?

Reasons for abnormal noise during low-speed braking include: 1. Overly worn brake pads: The exposed fixing points of the friction material rub against the brake disc or brake drum, causing abnormal noise. Solution: Replace the brake pads. 2. Poor contact surface: After replacing the brake pads, improper contact with the brake disc or drum leads to point or line contact, resulting in abnormal noise. Solution: Perform a break-in period for the vehicle. 3. Water exposure: Brakes may produce abnormal noise after the car has been through water. Solution: Handle according to water drainage, remove accumulated water, and replace the corresponding parts. 4. Wear: Excessive wear on the brake disc or brake drum. Solution: Replace the brake disc or brake drum.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.