Can you make a U-turn at a traffic light with a dashed yellow line?

1 Answers
Rhonda
07/30/25 7:23am
You can make a U-turn at a traffic light with a dashed yellow line. Here are the specific details: 1. Regulations: According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China', vehicles can make a U-turn at locations where there are no signs or markings prohibiting U-turns or left turns. 2. Function of the yellow line: The yellow line is used to distinguish lanes in different directions, but whether it is a single dashed yellow line or a double dashed yellow line, as long as it is a dashed line, you can overtake or make a U-turn safely. Generally, such double dashed yellow lines appear on narrow roads, such as two-way two-lane roads in mountainous areas, where these markings are used to distinguish different directions while also allowing vehicles to borrow the opposite lane for overtaking, etc.
Was this review help?
8
1
Share
More Forum Discussions

Audi A5 Engine Malfunction Yellow Light?

Audi A5 engine malfunction yellow light is on due to reasons such as sensor failure. Oxygen Sensor Factors: The oxygen sensor can last for 3 years or longer. For a new car showing the engine malfunction yellow light, it's advisable to check if the oxygen sensor plug is loose. Oxide blockage causing poor oxygen sensor performance can be cleaned with carburetor cleaner or a diluted sulfuric acid ferric chloride solution. Replace the oxygen sensor if it's damaged. Abnormal Engine Oil Factors: Using lower-quality gasoline can lead to incomplete combustion of the air-fuel mixture, eventually triggering the malfunction light. Prolonged use may cause varying degrees of harm to the engine. Visit a 4S shop to have the gasoline in the fuel tank extracted using specialized tools and refilled with high-quality gasoline. Valve Spark Plug Factors: Frequent driving can easily cause carbon buildup on spark plugs, often leading to poor engine performance and thus illuminating the malfunction light. Check the spark plugs for carbon deposits and clean them if necessary.
6
2
Share

How to Change the Oil for the Haval H5 Diesel Version?

Run the engine until it reaches operating temperature; place an old oil container under the oil pan, locate the oil pan drain plug, and slowly loosen the drain plug; move the oil container under the oil filter, use an oil filter wrench to loosen the filter, and unscrew it by hand; select the appropriate oil filter; apply new oil to the new filter's gasket; pour new oil into the oil pan, and check for leaks under the engine. Key Considerations for Engine Oil: Choose engine oil based on the engine's requirements; multi-grade oil is preferred as it is economical, long-lasting, and efficient, providing better protection for the engine; if the engine is in good condition and the seasonal temperature is low, use lower-viscosity oil to ensure smooth oil flow. In high-temperature seasons or if the engine is severely worn, higher-viscosity oil helps form an oil film and reduces engine wear. Specifications: The body dimensions are 4649/1810/1735 (mm), with a wheelbase of 2700mm. The exterior design is dynamic, stylish, and bold.
11
0
Share

How often should the Envision have its oil changed?

The Envision should have its oil changed every 5,000 to 10,000 kilometers. Reasons: If the oil is not changed for a long time, it will deteriorate. Engine oil has its own replacement cycle. The degradation of oil is actually affected by oxidation, and the rate of degradation is determined by the speed of oil oxidation. Regular oil changes are essential, as the oxidized substances in the oil will be expelled from the engine, creating a better working environment for the engine. Maintenance: During maintenance, the gasoline filter and air filter can be removed and cleaned with compressed air if they are not dirty. Additionally, the spark plugs should be replaced every 30,000 kilometers. Pay attention to whether the gear oil has water ingress—if it does, replace it in advance. The timing belt and timing belt tensioner should be replaced every 80,000 kilometers for 2V models and every 60,000 kilometers for 5V models.
8
4
Share

Reasons why the Audi Q3's fan keeps running after starting the car?

Fan keeps running due to high temperature. Possible reasons for the fan continuously running: This is normal. Because the engine temperature remains high after shutdown, the onboard computer continues monitoring and keeps the fan running to reduce temperature. Generally, if the vehicle has been driven for a long time, it's best to let it idle for a while after parking to allow mechanical temperatures to decrease before turning off the engine. Regardless of the vehicle's horsepower, idling consumes minimal fuel. If the fan is still operating, it indicates the mechanical components haven't cooled to the designated safe temperature. Potential fan malfunctions: Blockage in the cooling circuit causing slow heat dissipation, which makes the fan continue working. If this occurs after only short-distance driving and the fan doesn't stop for a long time, the vehicle should be inspected at a 4S shop. However, if you've driven hundreds of kilometers, this is normal behavior. While the radiator temperature may be normal, the coolant temperature sensor on the engine shows high engine temperature, requiring extended fan operation for cooling.
12
4
Share

Why does the engine speed increase when going downhill?

When going downhill, the high engine speed is due to the potential energy gained from gravitational acceleration as the vehicle moves from a higher to a lower elevation. Even without pressing the accelerator, the vehicle will accelerate downhill. However, the engine's reverse traction force will slow the vehicle down. When the slope is steep, the gravitational acceleration acting on the vehicle exceeds the engine's reverse traction force in the current gear, causing the engine speed to rise. Here are some precautions to take when going downhill: Do not rely solely on low gear to control speed: To avoid overheating the brake pads from prolonged braking, engine braking is used, but this does not mean you should avoid using the brakes altogether. Even if the gear is set to a low position, if the downhill slope is steep or long, the engine speed may still be forced to increase. In such cases, you should use the brakes to assist in slowing down. Engine braking in automatic transmission vehicles: For automatic transmissions, engine braking requires shifting to L (Low) or S (Sport) mode in manual mode to effectively utilize the engine's braking force.
9
3
Share

At What Age Can Children Sit in the Front Seat of a Car?

China has explicitly stipulated that minors under the age of 12 are not allowed to sit in the front passenger seat. Although the front passenger seat offers a wide field of vision and relatively less vibration, it poses extremely high risks. Traffic accidents are the leading cause of death for children under 14 in China. Specific regulations: Even parents holding children are not permitted to sit in the front passenger seat, and child safety seats cannot be installed there. If passengers in the front seat fail to fasten their seat belts while driving on highways or urban expressways, they will be fined and required to correct the behavior upon being caught by electronic surveillance or on-site inspection. Correct practices for children in cars: For children, the rear seats of a car are safer than the front seats. The middle seat in the rear is the optimal position for installing a child safety seat. For older children (typically no younger than 7-8 years) who need to use a three-point seat belt, it is advisable to use a booster seat.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.