Can you make a U-turn at a solid and dashed yellow line?

1 Answers
RobertRose
07/29/25 11:42pm
You cannot make a U-turn at a solid and dashed yellow line during a red light. Making a U-turn at an intersection during a red light is generally considered running a red light. Even though the line is a combination of solid and dashed, vehicles are not allowed to make a U-turn. Conditions under which a U-turn is allowed at a solid and dashed yellow line: If there are no signs prohibiting U-turns or left turns, and the traffic light is green, you can make a U-turn, but you must not obstruct other vehicles or pedestrians who have the right of way. Conditions under which a U-turn is allowed while driving: The driver should check for any explicit signs prohibiting U-turns. If there are no such signs, observe the road markings—single or double solid yellow lines prohibit U-turns, and you must wait until you have passed the markings before making a U-turn. If the road has two yellow lines in the middle—one solid and one dashed—the side with the dashed line is allowed to make a U-turn. Meaning of the solid and dashed yellow line: When a solid and dashed yellow line is painted on a road section, it separates opposing traffic flows. The side with the solid yellow line prohibits vehicles from overtaking, crossing, or making U-turns, while the side with the dashed yellow line allows overtaking, crossing, or U-turns when it is safe to do so.
Was this review help?
7
4
Share
More Forum Discussions

What are the methods to solve the door rattling noise when driving on bumpy roads?

To solve the door rattling noise when driving on bumpy roads, you can follow these steps: 1. Check if the door seal is aging and consider replacing it; 2. Inspect the door gaps for any foreign objects and clean them if necessary; 3. If the noise is caused by loose components between the door parts, tightening the screws may solve the issue; 4. Insufficient body stiffness may cause deformation during driving, leading to friction or shaking between the door and frame, or even friction between steel plates due to welding failure—it is recommended to visit a repair shop for professional handling. The possible causes of door rattling noise on bumpy roads include: 1. Squeaky hinges; 2. Aging door seals; 3. Small objects inside the door trim panel; 4. Loose interior trim panels or audio components.
5
0
Share

What does the tripreset button mean?

tripreset button refers to the trip mileage reset. 'trip' represents the trip mileage, and 'reset' means to reset. The trip mileage can record the number of kilometers driven within a certain period. After calculating the mileage driven within a week or a month, it needs to be cleared and recalculated for the next week or month. The tripreset button can be used to perform this reset. The trip mileage is different from the vehicle's total mileage. The total mileage of the vehicle cannot be cleared using the buttons on the dashboard. The total mileage records the distance the car has traveled from production until it is scrapped.
14
3
Share

What Causes the Dull Roaring Sound of an Engine?

The reasons for the dull roaring sound of an engine are: 1. Severe carbon buildup in the engine; 2. Abnormal cylinder operation; 3. Excessive engine consumption leading to insufficient oil. Solutions include: 1. Inspect the vehicle's intake system to check if the air filter is dirty or if the vacuum tube is aged and leaking. Cleaning the throttle can help avoid affecting the air intake volume; 2. Examine the vehicle's exhaust system to see if the three-way catalytic converter is clogged, and clean or replace it promptly; 3. Check if the oil grade used is inappropriate, as using oil with too high a grade can cause the engine to sound dull. The engine should undergo regular maintenance, with parts replaced according to the corresponding maintenance schedule. Keep the engine compartment clean and periodically check for abnormal noises in the engine, which can help identify and resolve issues early. The engine is the heart of the vehicle, and only when it operates normally can the vehicle run smoothly.
17
1
Share

What is the problem when the engine malfunction indicator light flashes?

The reason why the engine malfunction indicator light flashes is that a certain component of the engine has failed, which is an abnormal phenomenon. The possible scenarios after the engine malfunction indicator light flashes include: 1. The light is on but there are no abnormalities in driving. This is usually due to a sensor malfunction, and you can continue driving temporarily, but it is recommended to drive at low to medium speeds; 2. The engine malfunction light is on, the vehicle can still be driven, but severe shaking, lack of power during acceleration, and other symptoms require rescue; 3. The car cannot start, which is caused by a fuel pump or ignition component failure, and you can only call for help. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, electric motors, etc.
1
4
Share

How much does the Haval Big Dog weigh?

Haval Big Dog's total vehicle weight is 2 tons. Haval Big Dog: The Haval Big Dog is positioned as a compact SUV, with dimensions of 4620mm in length, 1910mm in width, and 1780mm in height, and a wheelbase of 2738mm. In terms of fuel consumption, the Haval Big Dog's declared fuel consumption per 100 kilometers is 6.9L, indicating excellent fuel economy. The official names for the six colors of the Haval Big Dog are: Orange Dog, Red Dog, White Dog, Black Dog, Gray Dog, and Green Dog. Design: The Haval Big Dog's rugged body styling and rich body colors, combined with the retro elements of circular headlights and the fashionable trend of LED integrated high and low beam design, give it a high rate of turning heads, while also meeting the growing needs of the emerging generation of consumers in recent years.
8
4
Share

How Often Should Shock Absorbers Be Replaced?

Shock absorbers should be replaced every 80,000 to 100,000 kilometers. Over time, the vehicle's vibration filtering performance will deteriorate significantly, potentially affecting handling aspects such as braking and cornering. If the daily driving route has poor road conditions, this will accelerate the wear of the shock absorbers, and owners should replace them in advance to avoid driving safety issues. The impact of damaged shock absorbers on the vehicle: 1. If one shock absorber is leaking oil, it will cause the vehicle body to become unbalanced, with one side higher than the other, leading to automatic deviation while driving and exacerbating irregular tire wear; 2. If the shock absorber top rubber ages and falls off, it will cause the shock absorber to collide with other components, resulting in abnormal noises. Most abnormal noises from the chassis are due to this reason; 3. If the shock absorber spring becomes weak and lacks sufficient extension force, the shock absorption and cushioning effects will be greatly reduced, increasing the hydraulic pressure on the shock absorber and leading to oil leakage.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.