Can You Keep Driving When the Engine Oil Light Comes On?

Can people with myopia drive?

According to the regulations on the application and use of motor vehicle driving licenses, individuals with myopia are permitted to drive. When applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked-eye or corrected vision of both eyes must reach 5.0 or above on the logarithmic visual acuity chart. For other types of driving licenses, the naked-eye or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. The physical requirements for obtaining a driving license are as follows: 1. Height: Applicants for large passenger vehicles, large trucks, or trolleybuses must be at least 155 centimeters tall. 2. Vision: Applicants for large passenger vehicles, large trucks, or trolleybuses must have naked-eye or corrected vision of both eyes reaching 5.0 or above on the logarithmic visual acuity chart. For other types of driving licenses, the naked-eye or corrected vision of both eyes must reach 4.9 or above on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness.

7

4

Share

Can 205 tires be replaced with 225?

205 tires can be replaced with 225. Here is an introduction about tires: 1. Introduction: Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. In 1845, R.W. Thomson, a civil engineer from Scotland, invented the pneumatic tire and obtained a patent from the British government under the title "Improvement in the Wheels of Carriages and Other Vehicles." On December 10 of the same year, the first pneumatic tire was born. 2. Usage: Tires are usually mounted on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. 3. Function: Tires are often used in complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance. At the same time, they must also have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, indicating the significant role tires play in rubber consumption.

13

5

Share

How to Slow Down a Manual Transmission Car?

When slowing down a manual transmission car, you should press the brake while downshifting. In some cases, it is necessary to downshift in advance, and the operation method may vary slightly under different circumstances. Information about manual transmissions is as follows: 1. The manual transmission is the simplest in structure and the lowest in cost, but it also offers the most driving fun among transmissions. 2. The lower the gear of a manual transmission, the larger the gear ratio; the higher the gear, the smaller the gear ratio. Additional relevant information is as follows: 1. Before the last few drops of fuel are burned up, the car usually jerks twice, meaning there is a sense of hesitation. At this point, you should quickly turn on the hazard lights and pull over as soon as possible. If you want to coast to a more suitable position before stopping, you can shift the transmission into neutral. 2. When the engine has just stalled, there is still some brake assist, but after pressing the brake twice, the assist will be lost, and the pedal will become very stiff. Therefore, try to reduce the speed as much as possible with the first brake press, and then use more force for subsequent brake presses.

20

4

Share

What is the method for charging a BMW car battery?

Open the hood of the BMW car, there is a grounding cylinder inside the hood, connect the charger to it to start charging. More related information is as follows: 1. Generally, cars are equipped with a generator. As long as the engine is running and the generator is functioning properly, it can generate electricity, which will charge the battery. Once the battery is fully charged, the charging will stop. As long as the battery's energy is not consumed, there is no need to charge it. 2. The generator charges the battery continuously without any fixed intervals. The generator adjusts the charging current based on the battery's charge level. Every time the engine is started, the amount of electricity consumed is enough for the generator to charge for about ten to twenty minutes. The electricity generated by the generator is first used to power all the electrical equipment required for the engine to operate, and the remaining electricity is then used to charge the battery. 3. While driving, if the generator is not producing electricity, the car can still operate normally as long as the battery has charge. However, if the battery's charge is not replenished, it will eventually deplete. Once the battery is completely drained, the car will not be able to operate.

18

2

Share

What is the appropriate tire pressure for SUV vehicles?

SUV vehicle tire pressure should be maintained at 2.5 bar. In summer, the tire pressure should be between 2.3 and 2.4 bar, as higher pressure combined with high road temperatures may increase the risk of a tire blowout. In winter, a tire pressure of 2.5 bar is suitable. Strictly speaking, tire pressure refers to the air pressure inside the tire. There is a label on the rear of the driver's side door indicating the standard tire pressure, which refers to the pressure when the tire is cold—meaning the vehicle has been parked for at least three hours or driven no more than 1.6 km. Measuring tire pressure when the tire is cold provides the most accurate reading. Below is relevant information about vehicle tire pressure: Hazards of excessive tire pressure: 1. Reduced friction and adhesion of the tire, affecting braking performance. 2. Causes steering wheel vibration and deviation, reducing driving comfort. 3. Accelerates wear on the central tread pattern of the tire, shortening its lifespan. 4. Increases vehicle vibration, indirectly affecting the lifespan of other components. 5. Overstretches the tire cords, reducing the elasticity of the tire body and increasing the load on the vehicle during driving. 6. Decreases resistance to punctures, making it easier for sharp objects like nails or glass to penetrate the tire, leading to internal cracks or blowouts. Hazards of insufficient tire pressure: 1. Increases friction with the road surface, leading to higher fuel consumption. 2. Makes the steering wheel heavy and prone to deviation, compromising driving safety. 3. Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling. 4. Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim, damaging the tire bead area and causing abnormal wear. 5. Multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under such conditions may result in a blowout. 6. Low tire pressure increases tire body deformation, making the sidewalls prone to cracking and causing flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.

8

1

Share

Does Using Toothpaste to Clean the Car Harm the Glass?

Toothpaste can harm the car glass when used for cleaning. Toothpaste is typically composed of many substances with abrasive properties, such as calcium hydrogen phosphate, calcium carbonate, silicon dioxide, calcium pyrophosphate, and aluminum hydroxide. These substances give toothpaste its friction function. If toothpaste is used to clean glass, under light, you can see numerous fine scratches. The correct method to clean car glass is to pour car glass cleaner into a spray bottle and evenly spray it on the interior glass. If you're concerned that the sprayed cleaner might affect other parts of the car, you can cover them with a cloth or plastic beforehand. Then, use a clean, soft towel to wipe the glass. For car glass maintenance, it's important to completely remove any dirt from the glass. The defogging and heating function should be turned off after 5 to 10 minutes to prevent the rear window from cracking. After replacing the glass, avoid washing the car for two days and try to drive on flat roads. If the wipers do not fit tightly against the glass, they can cause scratches and impair functionality, so regular maintenance or replacement is necessary. Also, regularly replace the rubber seals to prevent leaks due to aging.

15

5

Share

Can You Keep Driving When the Engine Oil Light Comes On?

Can people with myopia drive?

Can 205 tires be replaced with 225?

How to Slow Down a Manual Transmission Car?

What is the method for charging a BMW car battery?

What is the appropriate tire pressure for SUV vehicles?

Does Using Toothpaste to Clean the Car Harm the Glass?

What is the fuel tank capacity of the 3.5L Prado in liters?

What kind of engine oil is used for the Tiguan L?

How Long Does It Take to Schedule a Retake for Subject 2?

How Often Should the Coolant Be Replaced in a Magotan?