Can You Drive with a Tire Pressure of 1.7?

What Are the Hazards of Oil Emulsification to the Engine?

The Hazards of Oil Emulsification: Oil emulsification can lead to a reduction in various performance aspects of the oil, not only affecting the vehicle's power performance and fuel economy but also increasing the engine's wear. Over time, this can easily lead to bearing seizure and even complete engine failure. Causes of Oil Emulsification: 1. Cylinder Liner Damage: This is likely due to cracks in the cylinder liner, allowing coolant to seep through the cylinder wall directly into the oil pan. Alternatively, it could be due to aging of the cylinder liner sealing ring, in which case the seal should be checked. 2. Engine Water Plug Leakage: If the engine water plug is severely aged, it will definitely leak. In this case, coolant will mix directly into the oil pan, making regular inspection of the water plug crucial. 3. Radiator Damage: Additionally, damage to the oil cooler pipes can also cause water to enter the oil. 4. Cylinder Head Gasket Damage: Due to prolonged high-pressure conditions inside the cylinder, the cylinder liner may become damaged, causing the oil and coolant passages to interconnect, leading to oil emulsification.

12

5

Share

What year is China V vehicle?

China V emission standard vehicles started production in 2012 and were implemented in 2013. The China V emission control level is equivalent to the European Euro 5 emission standard currently in effect. Here is relevant information about China V: 1. China V vehicles are those that comply with the 'National Fifth Stage Motor Vehicle Pollutant Emission Standard'. The motor vehicle pollutant emission standard was established to implement environmental protection laws, reduce and prevent vehicle exhaust pollution, protect the ecological environment, and ensure human health. 2. The European Union has been implementing this standard since 2009, which imposes stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter from motor vehicles. From China I to China IV, each upgrade in the standard reduces single-vehicle pollution by 30% to 50%. The China V standard was implemented nationwide on January 1, 2017. 3. Shortly after the implementation of the China V standard, the China VI standard was quickly put on the agenda. Many regions implemented the China VI standard ahead of schedule. For example, starting from July 1, 2019, all newly registered vehicles in Guangdong Province must comply with the China VI emission standard. At that time, only China VI standard new vehicles were available on the market, and vehicles transferred from other regions also had to meet the China VI standard.

15

0

Share

How often are 7-seater vehicles inspected now?

7-seater vehicles and models with more than 7 seats are inspected every 2 years for the first 6 years, annually for 7-seater vehicles aged 6-15 years, and every 6 months for 7-seater vehicles over 15 years old. Non-commercial small and mini passenger vehicles with 7-9 seats within 6 years are included in the exemption from inspection; for non-commercial small and mini passenger vehicles over 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. The documents required for vehicle annual inspection are as follows: 1. Owner's ID card. 2. Original vehicle license. 3. Valid compulsory traffic insurance policy. 4. Current year's vehicle and vessel tax payment (or exemption) certificate (the vehicle and vessel tax certificate is usually included in the compulsory traffic insurance policy).

12

1

Share

What are front and rear position lights?

Front and rear position lights are essentially the vehicle's width indicator lights. These lights primarily indicate the presence of a vehicle and its approximate width, aiding other vehicles in judging distance during oncoming traffic or overtaking. Front and rear position lights are typically installed at the front and rear of the vehicle. More details are as follows: 1. The headlight assembly at the front of a vehicle includes: clearance lights, front position lights, high/low beam headlights, turn signals, and fog lights, which may sometimes be integrated into a single unit. The rear light assembly consists of: rear position lights, brake lights, reverse lights, turn signals, and license plate lights. 2. Front and rear position lights, commonly referred to as parking lights or width indicator lights, serve to indicate the vehicle's presence and approximate width, facilitating judgment for other vehicles during encounters or overtaking maneuvers. 3. The brake signal light, commonly known as the brake light, is a warning light that alerts following vehicles that the vehicle has applied braking. Installed at the rear of the vehicle and emitting red light when brakes are applied, its brightness significantly exceeds that of rear position lights (typically five times brighter) due to its critical safety function. It remains clearly visible even at distances exceeding 100 meters during daytime.

8

1

Share

What is the Best Tire Pressure for High-Speed Driving?

The standard tire pressure for high-speed driving ranges between 2.2-2.5 bar, varying depending on the brand and model of the vehicle. Other factors to consider for appropriate tire pressure include: 1. Winter: It is advisable to slightly increase the tire pressure by about 0.2 bar above the standard tire pressure. 2. Summer: For vehicles parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures. Additional Information: 1. Empty/Half-Load: Follow the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's sticker can serve as a reference for the minimum tire pressure). 2. Full Load: When fully loaded, follow the upper limit of the standard tire pressure (the maximum tire pressure indicated on the tire can serve as a reference for the theoretical maximum tire pressure).

5

Share

What Causes Engine Idle Speed to Fluctuate?

Reasons for unstable engine idle speed: 1. Intake manifold leakage: When unwanted air, fuel vapor, or exhaust gases enter the intake manifold, it causes the air-fuel mixture to become too rich or too lean, leading to unstable idle speed. A simple method for car owners to check for intake manifold leaks: Open the engine hood, remove the air filter from the throttle body, start the engine, and block the throttle with your hand (if the engine stalls, there is no leakage; if it continues running, there is a leak). If the engine doesn't stall, inspect nearby pipes for any suction, which indicates a leak. 2. Excessive carbon buildup in the throttle body: Too much carbon buildup in the throttle body and surrounding intake passages alters the air channel cross-sectional area, preventing the control unit from precisely managing idle air intake. This also results in an overly rich or lean mixture, causing unstable idle speed. 3. Faulty intake system components: The engine intake system has many actuators. 4. Fuel system issues: Problems such as clogged fuel injectors, dirty fuel filters, blocked fuel pump screens, faulty fuel pressure regulators, or obstructed return lines can lead to incorrect fuel injection, resulting in an imbalanced air-fuel mixture and unstable idle speed. 5. Ignition system faults: Issues like faulty ignition modules, incorrect spark plug gaps, worn or damaged spark plug electrodes, or excessive resistance in high-voltage wires can reduce spark energy or cause misfires, leading to erratic idle speed fluctuations. If a car exhibits unstable idle speed, it should be addressed promptly, as the engine is no longer operating at the ideal idle speed, negatively affecting fuel economy and emissions.

6

5

Share

Can You Drive with a Tire Pressure of 1.7?

What Are the Hazards of Oil Emulsification to the Engine?

What year is China V vehicle?

How often are 7-seater vehicles inspected now?

What are front and rear position lights?

What is the Best Tire Pressure for High-Speed Driving?

What Causes Engine Idle Speed to Fluctuate?

What materials are needed to apply for a driver's license?

How to Check the Production Date of Car Glass When Buying a Car?

Can I directly apply for an A3 driver's license?

How to Distinguish Between China IV and China V Standards?