···
Log in / Register

Can You Drive with 50 Bar Tire Pressure?

4 Answers
SanAbigail
07/30/25 1:14am
Tire pressure of 50 bar is not safe for driving. Vehicles should not be driven if the tire pressure is below 1.0 bar. Modern vehicles are equipped with tire pressure monitoring systems that typically alert when the tire pressure drops below 1.5 bar. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and misalignment, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, causing internal cracks or blowouts. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found, drive to a tire shop for repair and reinflation; If the tire pressure warning reappears after inflation without any visible puncture, it may be due to a leaking rim. It is recommended to inspect and replace the rim if necessary.
Was this review help?
1
5
Share
MacSadie
08/15/25 6:50am
As someone who works with cars year-round, I know that a tire pressure of 50 PSI is extremely dangerous. The normal tire pressure for passenger cars should be between 30 and 35 PSI, which is significantly lower than this. At high speeds, tires can easily overheat, deform, or even blow out, potentially causing an accident if control is lost. I recommend pulling over immediately, turning off the engine, and checking if the tire pressure gauge reading is accurate. If the pressure is indeed too high, quickly release air to bring it down to the normal range. It's important to develop the habit of using a simple tire pressure gauge to measure tire pressure every time you refuel or before heading out, to avoid recurring issues that could affect safety and cost-effectiveness.
Was this review help?
5
4
Share
Expand All
Kent
10/20/25 6:01am
Having driven for over a decade, I've encountered tire issues quite a few times. A tire pressure of 50 PSI is practically asking for trouble—it's way beyond the standard and can accelerate wear on the center of the tire, make handling unpredictable, and significantly increase braking distance. Safety comes first, so I always advise others not to push their luck while driving. Pull over to a safe spot and use a spare tire pressure gauge to verify. It could also be due to overinflation or a faulty sensor giving false readings. It's best to visit a nearby auto repair shop to have it adjusted back to the 30-35 PSI range with professional tools. Remember to check tire pressure regularly, as hot summer weather can cause it to rise rapidly.
Was this review help?
9
2
Share
Expand All
VanBeckett
12/03/25 6:32am
I've been into cars for years, and a tire pressure of 50 PSI is definitely not right. The normal range should be 30-35 PSI. Higher pressure significantly increases the risk of tire blowouts, raises fuel consumption, and makes the grip unstable. Pull over immediately and check the readings with a mobile app or your car's display. Adjust the pressure down to a safe range. Also, take care of your tires—if there are too many cracks, it's better to replace them to avoid further issues.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What is the motor power of the Changan Benben EV?

The motor power of the Changan Benben EV is 30kW and 55kW, with two different powertrain models: the EC260 and the EC360. The Changan Benben EV is a single-motor vehicle, and its motor is front-mounted, making it front-wheel drive. For microcars, there is insufficient space at the rear to install complex independent suspensions, so microcars typically use a torsion beam for the rear suspension. The torsion beam suspension is a common type of non-independent suspension, known for its simple structure, compact size, and minimal space requirements.
11
3
Share

What transmission is used in the Changan Eado manual version?

Changan Eado manual version uses a 5-speed manual transmission. The following are the relevant details: Features of the 5-speed manual transmission: The five-speed transmission adopts a two-shaft layout, eliminating the conventional intermediate shaft, and is a longitudinally mounted front-drive transmission integrated with the main drive bevel gear and differential. It receives engine power through the input shaft, changes speed via various gear sets, and utilizes the output shaft, main reduction gear, and differential gear mechanism to drive the front wheels. Introduction to Changan Eado: The Changan Eado is a compact sedan launched by Changan Automobile, available in two powertrain options: a 1.6L engine and a 1.4T turbocharged engine. The 1.6L engine delivers a maximum power of 128 horsepower, while the 1.4T engine produces a maximum power of 158 horsepower. In terms of the transmission system, the 1.6L model is paired with either a 5-speed manual transmission or a 6-speed automatic transmission, and the 1.4T model is matched with a 7-speed dual-clutch transmission.
11
0
Share

What is the fault when the EPS light is on in the Changan Honor?

When the EPS light is on in the Changan Honor, it indicates a fault in the power steering system, and the steering wheel will become heavier. The power steering systems in automobiles include: electric power steering system, electro-hydraulic power steering system, and mechanical hydraulic power steering system. The electric power steering system does not have hydraulic mechanisms; this system relies on an electric motor to provide steering assistance. The electro-hydraulic power steering system is actually developed based on the mechanical hydraulic power steering system. Both of these power steering systems have hydraulic mechanisms and require the use of power steering fluid. The electro-hydraulic power steering system simply adds some electronic systems to the mechanical hydraulic power steering system.
11
5
Share

How many cylinders does the Changan Benben have?

Changan Benben is equipped with a four-cylinder engine. The entire Changan Benben series uses a 1.4-liter naturally aspirated engine with a rotation speed of 6000 rpm. This engine is equipped with VVT technology and multi-point electronic fuel injection technology, and uses an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. The front suspension of the Changan Benben uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. Most microcars use torsion beam rear suspensions due to their simple structure, small size, and minimal space occupation. This type of suspension is very suitable for microcars, as it helps to expand the rear seating space and trunk space.
6
0
Share

What is the best engine oil for Changan Lingxuan?

Changan Lingxuan can use synthetic or mineral engine oil. This model offers two powertrain options: a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. For models with naturally aspirated engines, mineral or semi-synthetic oil can be used; for turbocharged engine models, semi-synthetic or full-synthetic oil is recommended. The Changan Lingxuan features a three-bar horizontal grille combined with dynamic headlight and fog light designs, presenting an overall stable appearance. The vehicle dimensions are 4730mm in length, 1795mm in width, 1730mm in height, with a wheelbase of 2760mm.
1
3
Share

Does Installing an Engine Guard Plate Affect Heat Dissipation in Cars?

Engine guard plates do have an impact on vehicle heat dissipation, but the effect is minimal. The specific reasons are as follows: 1. The heat dissipation performance of an engine is primarily reflected in the front grille, engine compartment design, water pipes, and radiator design, with only a small portion dissipating through the chassis. 2. Engine guard plates are custom-designed protective devices for various vehicle models. Their primary purpose is to prevent mud from encasing the engine, which could lead to poor heat dissipation, and secondly to protect the engine from damage caused by impacts from uneven road surfaces during driving. Through these designs, they aim to extend the engine's service life and avoid vehicle breakdowns due to external factors causing engine damage during travel.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.