···
Log in / Register

Can You Drive When the Car Reminds You to Change the Oil?

4 Answers
EstherLynn
07/29/25 11:46pm
You cannot drive when the car reminds you to change the oil. The steps to change the oil are: 1. Lift the car, remove the protective plate, and place a container under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate and lower the car, then use a funnel to add oil through the oil filler port. Precautions for changing the oil: 1. Perform the change when the engine is warm to ensure all old oil is drained; 2. Add the oil and ensure the amount is appropriate; 3. After adding the oil, start the engine and check all components for leaks. Run the engine for three minutes to confirm the oil level reaches the normal mark.
Was this review help?
11
0
Share
PaisleyLee
08/16/25 3:04am
Last time my old car had the oil light on, the mechanic said never to push it. Dirty oil can clog the oil passages in the engine, causing the pistons to grind dry in the cylinders, and it can seize up in just half an hour. Once I had to drive to the office for a project, and the engine locked up halfway. The overhaul cost over 8,000 RMB, and now the car accelerates like it has asthma. So when the light comes on, find the nearest repair shop to change the oil—you can push it at most 20 km, don’t gamble. Remember to change to semi-synthetic oil regularly—it saves money and hassle.
Was this review help?
18
3
Share
Expand All
McRhett
10/19/25 3:57am
It depends. I once drove 10 kilometers home before changing it. But never follow those online examples of going on long trips without an oil change—that's pure car abuse. When engine oil turns black and thickens, it's like a blood clot in your veins; bearing seizure can happen in an instant. Last week, my neighbor didn't believe the warnings and stubbornly drove 300 kilometers for a road trip—now he's facing a 13,000-yuan engine overhaul bill. Here's a down-to-earth trick: check the dipstick when the engine's cold. If the oil drips in clumps or has a metallic sheen, shut off the engine immediately and call a tow truck. Full synthetic oil must be changed every 8,000 kilometers—skimping on this will definitely lead to regret.
Was this review help?
15
0
Share
Expand All
OKiara
12/02/25 4:33am
Last year, three colleagues in our office fell victim to car troubles, with Xiao Wang taking three days off after being shocked by the hefty repair bill. An illuminated oil light is essentially your engine 'coughing up blood'—those metal particles act like sandpaper grinding against cylinder walls. I once limped three kilometers at snail's pace to Uncle's repair shop after the light came on, where the mechanic drained sludge resembling asphalt from the oil pan. Now I religiously maintain three habits: oil changes per the manual, monthly dipstick checks, and using manufacturer-approved oil filters. For vehicles with auto start-stop, change oil 500 kilometers ahead of schedule.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What Causes Car Jerking?

The reasons for car jerking are: 1. Engine oil passage blockage; 2. Dirty transmission oil clogging the oil passage; 3. Damaged transmission solenoid valve; 4. Forgetting to release the handbrake; 5. Irregular wear of the clutch; 6. Damaged solenoid valve; 7. Some engine cylinders not working; 8. Poor volatility of low-quality fuel. The solutions for car jerking are: 1. Check the transmission temperature and cooling system; 2. Replace the transmission oil; 3. Check if the internal valve body of the transmission is damaged and needs replacement; 4. Check for carbon deposits in the engine valves and intake pipe that need cleaning.
17
3
Share

How to Activate Honda's Auto-Lock Feature?

The method to activate Honda's auto-lock feature is as follows: With the ignition on, press and hold the lock button on the remote key for 10 seconds until the dashboard shows both turn signals lighting up, indicating activation. Taking the Honda CR-V 2021 Manual 2WD Classic Edition as an example, its body dimensions are: length 4621 mm, width 1855 mm, height 1679 mm, with a wheelbase of 2661 mm. The Honda CR-V 2021 Manual 2WD Classic Edition is equipped with a 1.5-liter turbocharged engine, delivering a maximum power of 142 kW at 5600 rpm and a maximum torque of 243 Nm between 2000 to 5000 rpm.
7
1
Share

What audio system does the Sagitar use?

The Sagitar is equipped with a Desay SV audio system, which is a radio and audio device designed to alleviate the monotony of travel for drivers and passengers. Taking the 2021 Sagitar as an example, its body dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, with a wheelbase of 2731 mm and a trunk capacity of 553 liters. The 2021 Sagitar is powered by a 1.2L turbocharged engine, delivering a maximum power of 85 kW and a maximum torque of 175 Nm, paired with a 5-speed manual transmission. It features a MacPherson independent front suspension and a multi-link independent rear suspension.
19
1
Share

How to Replace the Key Battery for BYD?

The method to replace the key battery for BYD is as follows: 1. Remove the mechanical key; 2. Along the slot where the mechanical key is stored, forcefully pry open the key's outer shell; 3. Use a blade to remove the battery from the edge gap; 4. After installing the new battery, reassemble the key shell. Taking the BYD S6 as an example, it is a mid-size SUV with body dimensions of: length 4810 mm, width 1855 mm, height 1680 mm, a wheelbase of 2720 mm, and a fuel tank capacity of 72 liters. The BYD S6 is equipped with a 1.5L turbocharged engine, delivering a maximum power of 113 kW at 5200 rpm, paired with a 6-speed manual transmission.
15
3
Share

How to Distinguish Between Run-Flat Tires and Regular Tires?

Run-flat tires and regular tires can be distinguished by the following methods: 1. Appearance: Run-flat tires have special markings, while regular tires do not; 2. Structure: The sidewalls of run-flat tires are thicker than those of regular tires; 3. Performance: In addition to the functions of regular tires, run-flat tires can allow the vehicle to travel a certain distance even when the tire pressure is zero. Tire maintenance methods include: 1. Regularly check tire pressure; 2. Regularly check front wheel alignment; 3. Avoid dragging tires on the ground to reduce tread wear; 4. Control speed appropriately based on the gradient, length, and road conditions; 5. Drive according to road conditions.
20
5
Share

Where is the oxygen sensor located?

The oxygen sensor is located on the engine exhaust pipe. It uses a ceramic sensing element to measure the oxygen potential in the vehicle's exhaust pipe, calculates the corresponding oxygen concentration based on the principle of chemical equilibrium, and achieves the purpose of monitoring and controlling the combustion air-fuel ratio to ensure product quality and exhaust emission compliance. The functions of the oxygen sensor are: 1. To determine whether there is excess oxygen in the exhaust after engine combustion and convert the oxygen content into a voltage signal transmitted to the engine computer; 2. To enable the engine to achieve closed-loop control targeting excess air, ensuring that the three-way catalytic converter has high conversion efficiency for pollutants such as hydrocarbons, carbon monoxide, and nitrogen oxides in the exhaust, thereby maximizing the conversion and purification of emission pollutants.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.