···
Log in / Register

Can you drive over the channelizing lines on ordinary roads?

4 Answers
OKennedy
08/29/25 2:17am

Generally, you cannot drive over the channelizing lines on roads. Channelizing lines are a type of traffic marking designed to guide vehicles to follow the prescribed route while driving, and crossing these lines constitutes a traffic violation. All drivers must correctly identify channelizing lines to ensure safe and civilized driving. The white grid lines on the road are channelizing lines, typically consisting of white V-shaped lines or diagonal stripes set according to the intersection's terrain, indicating that vehicles must follow the designated route and must not drive over or cross these lines. Channelizing lines are mainly used at wide, irregular, or complex intersections, ramp entrances of interchanges, or other special locations.

Was this review help?
17
0
Share
ZoeyLee
09/10/25 7:04am

I've always considered driving over traffic diversion lines on regular roads a major taboo. Over the years of driving, I've witnessed numerous accidents caused by this. Diversion lines primarily guide vehicles into proper lanes, such as solid or dashed lines on urban arterial roads. Carelessly crossing these lines during lane changes can easily obstruct other drivers' views or lead to rear-end collisions. Especially during rainy or foggy conditions with poor visibility, if you cross the line, the vehicle behind might not react in time, potentially causing an accident within seconds. My neighbor last year accidentally scraped another car while crossing the line, resulting in repair costs of over a thousand yuan. This habit needs to change. Adhering to road markings makes driving more orderly and safer. We must take responsibility for our own and others' safety on the road. Always pay attention to roadside signs and police reminders, and developing good driving habits is truly the way to go.

Was this review help?
18
4
Share
Expand All
Francisco
10/24/25 7:54am

My decades of driving experience tell me that crossing the guide line is absolutely unacceptable. The traffic law clearly states it in black and white. Solid lines are strictly forbidden to cross, and dashed lines can only be used to change lanes cautiously under specific circumstances. Unnecessarily crossing any line is a violation, and getting caught usually results in a fine of over 200 yuan. Those yellow or white lines commonly seen in cities are designed to control traffic flow and prevent congestion. If you don’t believe me, just observe intersections—police often patrol there to check. I once saw a young guy being stopped and lectured for crossing the line. Rules aren’t just for show; they’re barriers that protect all of us. When driving, stay strictly within the lines—don’t cut corners for temporary convenience. Safety always comes first, and that’s the golden rule.

Was this review help?
20
4
Share
Expand All
DiRyder
12/07/25 8:17am

When I first started learning to drive, I didn't take it seriously and crossed the guide lines several times, which led to a stern warning from the instructor about the dangers. The instructor said crossing the lines is a violation and could result in penalty points. Later, I tried to follow the lines properly and found that driving became smoother and less chaotic. For example, crossing the guide lines on highways when changing lanes might affect other drivers' judgment of speed, leading to side-swipe accidents. Now I understand these basic principles—it's best for beginners to start by paying attention to details. It's important to regularly review the content of driving lessons and not wait until problems arise to regret it. Driving steadily is the right approach, protecting oneself and respecting the rules.

Was this review help?
2
3
Share
Expand All
More Forum Discussions

What are the length, width, and height of the Tiggo 3?

Tiggo 3's length, width, and height are: 4420 mm, 1760 mm, and 1670 mm. The Tiggo 3 is a 5-door, 5-seat compact SUV under the Chery brand, with a wheelbase of 2510 mm, a fuel tank capacity of 55 liters, a trunk capacity of 550 liters, and a curb weight of 1358 kg. The Tiggo 3 is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 85 kW and a maximum torque of 143 N·m. It adopts a front-engine, front-wheel-drive layout, with a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear.
9
5
Share

Can I replace the brake pads of a car by myself?

You can replace the brake pads of a car by yourself. The method for replacing car brake pads is as follows: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the installation bracket of the brake disc and install the new brake pads. The methods to determine whether the brake pads need to be replaced are: 1. Observe that the thickness of the brake pads is only one-third of the original; 2. There is abnormal noise when lightly braking; 3. The braking response is slow, and the braking force becomes weak. Car brake pads, also known as car brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel.
5
3
Share

What Does the Yellow Engine Oil Light Mean?

The yellow engine oil light indicates insufficient engine oil. The effects of insufficient engine oil are: 1. Poor lubrication of various component surfaces, increased friction resistance, accelerated wear of parts, and in severe cases, engine failure; 2. Increased engine noise. Engine oil, also known as engine lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning; 4. Shock absorption and buffering; 5. Rust and corrosion prevention.
8
4
Share

What to Do When the Car Headlight Adjustment Screw Doesn't Work?

The solution when the car headlight adjustment screw doesn't work is: go to a 4S shop for repair or replacement. The method for adjusting car headlights is: 1. Drive the car to a flat and open road surface; 2. Turn on the car headlights, adjust the low beam projection point to about 30m away from the car, making the two projection points coincide; 3. Adjust the high beam projection point to be parallel to the ground. Car headlights, also known as car front lights or car LED daytime running lights, can be maintained by: 1. Regularly checking the seal of the headlights, and replacing the sealing ring between the lens and reflector if damaged; 2. Regularly cleaning the reflector, and replacing it if it turns black or the light intensity decreases; 3. Regularly cleaning dust and stains on the bulb.
8
4
Share

How to Check the Engine Oil in a Lynk & Co 03?

The methods to check the engine oil in a Lynk & Co 03 are: 1. After turning off and cooling the engine, pull out the oil dipstick to check the oil level; 2. Press and hold the start button for ten seconds to view it on the dashboard. Taking the 2021 Lynk & Co 03 as an example, its body structure is a 4-door, 5-seater sedan, with body dimensions of length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 245Nm, paired with a 6-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
19
2
Share

Why Does Coolant Level Decrease?

Coolant level decreases due to: 1. Coolant system leakage; 2. Use of pure water in the radiator; 3. Failure to use specified coolant or coolant containing excessive water content. Coolant is a specialized fluid containing additives, primarily used in liquid-cooled engine cooling systems. Its functions include: preventing radiator cracking and engine cylinder block freezing damage caused by coolant solidification during cold winter shutdowns. Precautions for coolant usage: 1. Never mix different types of antifreeze; 2. Never open the radiator cap or drain valve immediately after driving; 3. Completely remove old antifreeze and thoroughly clean the radiator during coolant replacement.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.