Can You Drive on the Road If the Vehicle License Is Lost?

What is the composition of antifreeze?

The main components of antifreeze are 50% pure water, 40% methanol, and 10% other substances. Types of antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. How to choose antifreeze: The basic indicators of antifreeze are the freezing point and boiling point. The freezing points of antifreeze available in the market include -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. How to replace antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipelines, with a focus on the five-way water pipe. The five-way pipe gets its name from having five connecting interfaces to various parts. Antifreeze flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of antifreeze in this part, the water pipe should be replaced or the interface should be re-secured as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue to pour water into the reservoir, allowing the water to continuously circulate through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish. Continue adding clean water until the water flowing out is clear. Note: Remember to remove the heater hose and drain the water from the heater. After draining for about an hour, add the new antifreeze through the radiator hose, which allows the antifreeze to flow quickly into the radiator. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more antifreeze until it reaches the "MAXT" mark on the reservoir.

19

5

Share

Where is the reset button located on the SAIC Maxus G50?

SAIC Maxus G50 reset button is located in the multifunction area. Here is a detailed introduction about the SAIC Maxus G50: 1. Overview: The SAIC Maxus G50 is equipped with multiple powertrains including traditional gasoline engines, pure electric, plug-in hybrid, and fuel cell power. In terms of power, it comes with 1.3T/1.5T engines. The SAIC Maxus G50 features a dashboard with strong three-dimensional lines, a multifunction steering wheel style, and multiple storage spaces. 2. Others: The SAIC Maxus G50 offers a "four-screen linkage" function, which includes a 12.3-inch central control screen, a 7-inch LCD instrument screen, a C-HUD head-up display, and mobile phone screen for information linkage. Additionally, the G50 is equipped with the Banma intelligent vehicle system jointly developed by SAIC and Alibaba, which includes native AutoNavi maps for intelligent flexible navigation, OTA online update function, intelligent scene voice recognition, and other features.

8

0

Share

What is the reason for the failure to start when checking the anti-lock braking system?

Failure to start may be due to the following reasons: fuel quality issues, lack of antifreeze, or excessive carbon buildup in the vehicle, which can also prevent the vehicle from starting. Below is an introduction to the anti-lock braking system: 1. Function of the anti-lock braking system: The anti-lock braking system can improve the safety performance of the vehicle and enhance the safety factor during emergency braking. When the vehicle brakes suddenly, it is easy for the wheels to lock up. After locking, the friction between the wheels and the ground decreases. If the front wheels lock up, the vehicle's direction cannot be controlled, and if the rear wheels lock up, it is extremely prone to skidding. The function of ABS is to continuously adjust the pressure of the brake caliper to prevent wheel lockup. 2. Composition of the anti-lock braking system: The anti-lock braking system mainly consists of a hydraulic braking system, an ABS control unit, and wheel speed sensors. The ABS determines whether a wheel is about to lock up based on signals from each wheel speed sensor. If a wheel is about to lock up, the hydraulic control adjusts the braking force of that wheel to prevent lockup. This action occurs very quickly, averaging 60-120 times per second, ensuring that the braking state remains at the optimal point.

16

3

Share

Why Does the Highlander Retain Its Value So Well?

The core reason for the Highlander's successful value retention actually lies in its stability. Here is the detailed introduction: Starting from the second generation, the Highlander entered the Chinese market. At that time, it quickly secured a place by leveraging its strong advantages, and its reputation continued to improve over time. Over the years, there have been hardly any major issues exposed. Therefore, with a solid reputation and market presence, it naturally thrives. The model adopts a 'governing by doing nothing' policy, making minor upgrades and facelifts based on market feedback, staying unchanged to cope with all changes. There are no perfect vehicles in the market, but the Highlander manages to cover a bit of everything consumers demand, offering balanced performance, which leads to its success.

6

1

Share

How to Repair Black Plastic Bumpers on SUVs?

It depends on the extent of the damage. For minor scratches, waxing can be used for treatment. If there is a break and the broken part is still present, plastic welding can be employed for repair. Apply putty to the welded area, smooth it through sanding for aesthetic improvement, and finally complete the repair with painting. Below are the functions of the bumper: 1. From a safety perspective: It serves as a buffer during low-speed collisions, protecting the front and rear body of the car. It also provides some protection for pedestrians in accidents involving them. 2. From an appearance perspective: It has decorative value, being an important component in styling the car's exterior. 3. Aerodynamic role: The car bumper also plays a certain aerodynamic role. Additionally, to reduce injuries to passengers in side-impact collisions, door bumpers are usually installed in cars to enhance the door's impact resistance.

19

5

Share

What to Do If the Car Burns Engine Oil?

After the vehicle reaches normal operating temperature, if blue smoke is still coming out of the exhaust pipe, it needs to be addressed by replacing the piston rings. Aged or damaged valve seals are also a significant factor causing the car to burn engine oil, and new valve seals need to be replaced.

3

4

Share

Can You Drive on the Road If the Vehicle License Is Lost?

What is the composition of antifreeze?

Where is the reset button located on the SAIC Maxus G50?

What is the reason for the failure to start when checking the anti-lock braking system?

Why Does the Highlander Retain Its Value So Well?

How to Repair Black Plastic Bumpers on SUVs?

What to Do If the Car Burns Engine Oil?

What does BC mean on BMW cars?

What are the dimensions of the new Land Rover Evoque?

What to Do If Water Enters the Car Air Conditioning Vent?

How to Use Cruise Control in Buick Excelle?