Can You Drive on the Hong Kong-Zhuhai-Macao Bridge?

1 Answers
DeBarrett
07/28/25 3:12pm
You can drive on the Hong Kong-Zhuhai-Macao Bridge, but you need to meet the following conditions: 1. Private vehicles crossing the bridge require toll payment and must have a Hong Kong or Macao license plate. 2. If you are a Hong Kong or Macao vehicle owner, you need a cross-border vehicle permit. Additional relevant information is as follows: 1. To drive the entire length of the bridge, you must have three types of license plates. These include the Guangdong Z license plate, as well as Macao and Hong Kong license plates. 2. The designers of the Hong Kong-Zhuhai-Macao Bridge adopted a "twist" design, allowing drivers to follow the right-hand-drive, left-hand-exit rule. When mainland vehicles enter the bridge, they still adhere to the mainland's right-hand traffic habit.
Was this review help?
9
4
Share
More Forum Discussions

What are the annual inspection requirements for vehicles over 6 years old?

The annual inspection requirements for vehicles over 6 years old are as follows: Small and micro non-operational passenger vehicles must undergo inspection once every 2 years within the first 6 years; for vehicles over 6 years old, inspection is required once every year; for vehicles over 15 years old, inspection is required once every 6 months. Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate, equivalent to an annual health check for the vehicle based on the safety technical conditions for motor vehicle operation. Annual inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. Vehicles can undergo inspection and apply for annual review within 3 months before the annual review date. It is advisable to do so two months or more than one month in advance, as the workload at inspection stations is relatively lighter before the 10th of each month, presenting a good opportunity to avoid queues for the inspection.
2
0
Share

Which Air Circulation Mode to Use for Defogging Inside the Car?

When defogging inside the car, use the external air circulation mode to introduce outside air into the car, which helps remove fog faster. Turn on the car's air conditioning cooling function along with external circulation, and set the fan to maximum speed. This can typically clear the fog on the windshield in just over ten seconds. To completely eliminate fog inside the car, use warm air to blow the windshield. Start with external circulation, select the warm air mode and direct the airflow to the front windshield vents. Wait for about five minutes, then switch to internal circulation or turn it off directly. Using warm air for defogging in winter is more comfortable, but it takes longer to remove fog compared to using cold air.
2
2
Share

Why Won't My Car Start?

Reasons why a car won't start: 1. Low fuel level or fuel gauge showing below the red line; 2. Malfunction of sensors shared by the ignition system and fuel injection system; 3. Burned-out power supply wires from the battery or damaged starter relay; 4. Excessive carbon buildup causing poor valve sealing, engine misfire, or weak acceleration. Correct steps to start a car: 1. Insert the car key into the ignition switch and turn it one notch upward, pause briefly to allow the fuel pump to activate and for the fuel supply and electrical systems to self-check; 2. Ensure the gearshift is in the neutral position and depress the clutch pedal; 3. Turn the key upward until you hear the engine start, then release the key; 4. Once the dashboard lights up, gently release the clutch pedal with your left foot while moderately pressing the accelerator pedal to ensure a smooth start.
17
5
Share

What Does Tire Pressure System Malfunction Mean?

Tire pressure system malfunction may indicate a failure in the tire pressure monitoring system or an abnormality in one of the car's wheels. It is recommended to stop and inspect immediately. The tire pressure monitoring system monitors the tire pressure of all four wheels. If the tire pressure system malfunctions, it is usually due to low tire pressure in one of the wheels. It is important to ensure that the tire pressure information sensor is not damaged during maintenance, such as when patching or replacing tires. The tire pressure monitoring system can automatically monitor tire conditions by recording tire rotation speed or through electronic sensors installed in the tires, effectively ensuring driving safety. There are two types of tire pressure monitoring systems: indirect and direct. The indirect system detects abnormalities by monitoring differences in tire rotation speed, while the direct system uses four tire pressure sensors installed inside the tires to monitor pressure in real-time, ensuring safety while driving.
18
3
Share

What is the Difference Between Tubeless Tires and Regular Tires?

The differences between tubeless tires and regular tires are: 1. Different composition: Tubeless tires do not have an inner tube; regular tires have an inner tube. 2. Different safety performance: When these two types of tires are punctured by a nail, the tubeless tire leaks air very slowly; the regular tire may lose air immediately, requiring the immediate use of a spare tire. 3. Different vehicle applications: Tubeless tires are used on small cars or motorcycles; regular tires are mostly used on bicycles or some large trucks. Tires are one of the important components of a car, and their main functions are: to support the entire weight of the vehicle and bear the load of the car; to transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; to reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and early damage to car components, adapting to the high-speed performance of the vehicle and reducing driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency.
13
1
Share

How to Turn Off Auto Start-Stop?

To turn off the auto start-stop function, simply press the auto start-stop button (a circular arrow containing the letter A). The dashboard will display a system-off notification. To reactivate this function, press the button again. When auto start-stop is enabled, applying moderate pressure on the brake pedal will cause the engine to shut off. Releasing the brake will restart the engine, achieving fuel-saving objectives. The auto start-stop system automatically turns off the engine during temporary stops (e.g., at traffic lights) and restarts it when resuming motion. This system integrates an enhanced motor with idle start-stop capability into traditional engines, allowing complete engine shutdown during eligible idle-stop conditions. Upon driver demand for restart, the idle start-stop motor system instantly responds, enabling rapid engine reactivation for seamless transition, thereby reducing fuel consumption and exhaust emissions.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.