Can You Drive During an Orange Rainstorm Warning?

2 Answers
SanCamila
07/28/25 5:52pm
Can You Drive During an Orange Rainstorm Warning? It is advisable to stay at home if possible. If you are already outdoors, you should immediately seek a safe and sturdy shelter from the rain. Driving Precautions: Avoid driving too fast; Rainy weather makes roads slippery, and speeding is a major cause of accidents on highways. Drivers are reminded to deliberately control their speed, especially during heavy convective weather. Avoid tailgating; Reduced visibility during rain can make it difficult to see clearly on highways. To prevent accidents, especially multi-vehicle collisions, drivers must maintain a sufficient distance from the vehicle ahead. Check your vehicle before driving; Before setting off, ensure thorough preparation by inspecting key components such as doors, windows, wipers, tires, steering, and braking systems. Address any issues before hitting the road. Follow police instructions; If you encounter diversions on highways due to weather or accidents, cooperate with on-duty officers and follow their instructions. Do not linger or wait at diversion points. Do not force through standing water; During heavy rainfall, road sections may accumulate water. When approaching a waterlogged area, slow down gradually while ensuring a safe distance from vehicles ahead and behind. Never attempt to speed through standing water.
Was this review help?
17
0
Share
SanDerek
08/11/25 11:52pm
Driving during an orange rainstorm warning is truly unsafe. An orange warning indicates heavy rainfall with extremely high precipitation, leading to easily flooded and slippery roads, as well as severely reduced visibility. I remember once driving in such weather—the windshield wipers couldn’t keep up with the rain, and I nearly slid off the road on a curve, narrowly avoiding an accident thanks to quick reflexes. Risks include vehicle skidding/loss of control, being swept away by floodwaters, or rear-end collisions. If driving is unavoidable, I recommend sticking to main roads to avoid low-lying areas, maintaining speeds below 40 km/h, using fog lights and low beams to improve visibility, and ensuring the wipers function properly. The best option is to stay home until the warning lifts—after all, life only comes once, so don’t take unnecessary risks.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Why is the Avalon not selling well?

There are many factors affecting the sales of the Avalon, such as fewer recommendations; the model is relatively new and positioned at a higher level. Below is a related introduction about the Avalon: 1. Brand positioning: The Avalon is a flagship model launched by Toyota Motor Corporation in the 1990s in the US market. It is the largest sedan model under Toyota, positioned as a business vehicle. 2. Configuration: The Avalon is equipped with features such as a heated steering wheel, heated rear seats, rear seat folding in proportion, audio speakers, the size of the central control screen, ambient lighting, etc. It also includes technologies like intake sound enhancement (ISG), engine sound enhancement (ESE), and active noise control (ANC).
1
1
Share

What is the problem with fault code U1001?

When a car experiences issues, it will generate fault codes. The U1001 fault code indicates a communication failure between various computer modules, and there is also a possibility of a fault in the engine compartment relay control unit. A detailed diagnosis should be performed by specialists at a 4S shop or auto repair shop. Below is relevant information about automotive fault codes: 1. Automotive fault codes are codes generated by the vehicle's ECU (Engine Control Unit) after analyzing a malfunction. 2. Fault codes are categorized into current codes, history codes, and intermittent codes. Current codes are easier to detect, history codes refer to previously unresolved faults as the name suggests, while intermittent fault codes are not consistent.
17
2
Share

What are the reasons for many malfunctions in the Lynk & Co 06?

The reasons for many malfunctions in the Lynk & Co 06 are as follows: 1. Sensor issues: When the sensor is damaged, has poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine malfunction light to turn on; 2. Air intake problems: If the car's air filter is not clean and not regularly cleaned, it will affect the car's air intake. Over time, this can easily lead to blockage, and in severe cases, it will cause the engine malfunction light to turn on; 3. Poor mixture combustion: Poor mixture combustion leads to engine carbon deposits or detonation problems. These will be detected by the engine's oxygen sensor and reported to the ECU, which will naturally turn on the malfunction light as a warning.
4
5
Share

Can the Elantra's Central Control Screen Watch TV?

You can watch TV by inserting a USB drive. Below is an introduction to the Elantra: 1. Dimensions: The Elantra is a typical Korean car, with a length, width, and height of 4495mm, 1720mm, and 1425mm, respectively. As Hyundai's best-selling model overseas, it has gone through six generations. 2. Exterior: The Elantra's "Korean heritage" is immediately evident in its design. The overall body appears gentle and refined, but the redesigned front end gives it an aggressive look. Two prominent ridges on the hood extend forward to a small, protruding grille, creating a strong sense of forward motion. 3. Interior: The Elantra's interior features clean lines, with a beige color scheme that feels fresh and modern. The dashboard and door armrests are accented with matte metal-finish panels, adding a stylish touch.
13
3
Share

What is the function of the fourth button on the Hongqi H5 key?

The fourth button on the Hongqi H5 key is the engine remote start function. Here are the specific details about the remote start: 1. Introduction: The remote start function, as the name suggests, allows the vehicle to be started without entering the car, by remotely controlling the engine. The principle is to send a signal through the key or a mobile phone to remotely start the engine. Most models can be controlled via the car key, while some models also support remote control through dedicated mobile apps, offering even more functions on the phone. 2. Application: The purpose of this function is to eliminate the need for manually entering the car to 'warm up' the engine, making it convenient to preheat the vehicle in advance. This means the interior temperature can be raised beforehand, ensuring a comfortable experience when entering the car. This feature is particularly useful in cold regions.
19
1
Share

What does the faucet symbol on the car dashboard mean?

The faucet-shaped light displayed on the car dashboard is actually the engine status indicator light. Here are the specific details about the engine indicator light: 1. This indicator light is used to display the working condition of the vehicle's engine. When starting the vehicle, during the self-check process, this light will turn on and then automatically turn off. If the light remains on, it indicates issues such as poor engine combustion, low-quality fuel, or unclean engine cylinders. 2. Once the engine fault light comes on, in most cases, it will not disappear automatically. When turning the ignition key, during the vehicle's self-check, this light will illuminate and then go out. If it stays on, it means there is a mechanical issue with the vehicle's engine that requires repair.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.