Can You Control Speed by Braking in Subject Two?

Can a Flooded Car After Heavy Rain Still Be Driven?

Whether a flooded car after heavy rain can still be driven depends on the extent of water submersion. If the water level did not exceed the wheels, the car can be driven normally. However, if the submersion level is too high, it may affect the car's electrical circuits, making it unsafe to drive. First, observe the water level relative to the vehicle, particularly whether it has reached the engine or other critical interior components. If the water has risen to a certain height, it can severely impact the car's electrical system, engine, and other parts. If the water has reached the hood level, it is best to inspect the car for damage and avoid starting the vehicle. If the car stalls after being submerged, do not attempt to restart it, as this could cause a second stall and potentially further damage the engine, which may affect insurance claims later. After the car is flooded, the first step is to disconnect the battery by removing the positive and negative terminals. Additionally, shift the car's gear to neutral. It is crucial to notify the insurance company immediately, providing details about the situation, the submerged parts of the car, and its location. The insurance company will then conduct an on-site inspection to assess the damage.

3

4

Share

Can High Beam Lights Improve Visibility?

Yes. The function of high beam lights: High beam lights can illuminate objects that are higher and farther away, providing significant assistance to the driver's visibility at night. The intensity of the light is adjusted based on the distance of the filament. High beam lights focus the light parallelly, making it more concentrated and brighter, which allows them to illuminate distant and high objects. How to turn on high beam lights: Locate the high beam switch on the lever on the left side of the steering wheel or the light knob on the left side of the steering wheel; turn on the low beam lights, then push the lever downward (toward the engine direction), and the dashboard will display an indicator, indicating that the high beam lights are on. High beam lights focus the light parallelly, making it more concentrated and brighter, which allows them to illuminate distant and high objects. Low beam lights, on the other hand, emit light in a divergent state (between 1x to 2x the focal length), illuminating a larger area of nearby objects. The difference between high beam and low beam lights is that high beams have a higher angle and longer range, while low beams have a lower angle and shorter range.

3

1

Share

Why do the taillights remain on after the engine is turned off?

If the taillights remain on after the engine is turned off, it may be because the car is not locked, the brake switch is faulty, or due to other reasons. Car not locked: If the car is not locked, the vehicle is in standby mode, which is normal. Wait for a while, and it should turn off. Brake light switch failure: If the brake switch is faulty, it can also cause the taillights to remain on after the engine is turned off. It is recommended that the owner replace the brake light switch. Other situations: If only one taillight is on, there is no need to panic. This is actually the vehicle's parking light function, designed to warn passing vehicles at night. Generally, this hidden feature is activated after parking and turning off the engine by turning the turn signal to the side where the light should be on. If the turn signal lever is accidentally bumped after turning off the engine, this function may be unintentionally activated.

16

0

Share

Can water be drained from a rear taillight that has water ingress?

Yes. Solutions for a cracked rear taillight cover: Repair it with glass glue or replace the cover. You can do it yourself or take it to an auto repair shop. For small cracks, you can repair them yourself using glass glue. Then, you can spray paint the cover. First, prepare a masking film to cover all parts except the rear taillight cover to avoid accidentally spraying the car paint. Then, proceed with the spray painting. Reasons why a rear taillight may not work: Most of the time, it's due to a burnt-out bulb inside the taillight. If you open the taillight and find the bulb is fine, then it's likely that the fuse in the car has blown. A damaged fuse is also a direct cause of the taillight not working. Rear taillights include the turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights. Generally, there are three main types of bulbs used in rear taillights: halogen car bulbs, HID car bulbs, and the newer LED car bulbs. When these lights are in operation, their power is typically around 21W, and when in position light mode, their power is usually around 5W.

17

5

Share

What does the H on a car tire mean?

The H on a car tire represents the tire's speed rating, which indicates the maximum speed at which the tire can carry a specified load under defined conditions. Here is some relevant information about tires: Tires are circular elastic rubber products assembled on various vehicles or machinery that roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Below are the steps for replacing a tire: 1. After parking and turning off the engine, use the handbrake to secure the vehicle; 2. Place heavy objects in front of and behind the wheels to prevent slipping, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the lug nuts of the tire to be replaced in a diagonal pattern; 4. Position the jack on the side of the vehicle where the tire needs to be replaced and lift the vehicle to a certain height; 5. Remove the lug nuts and take off the tire; 6. Install the spare tire or new tire, tightening the lug nuts in a diagonal pattern; 7. Lower the vehicle by releasing the jack and ensure all nuts and bolts are securely tightened.

3

2

Share

What are the causes of Mercedes-Benz electric tailgate failure?

Mercedes-Benz electric tailgate failure can be caused by issues with the electric tailgate button, remote key button/chip failure, activation of the anti-pinch function when closing the tailgate, or lock mechanism failure. Electric tailgate button failure: When the vehicle is unlocked, if the electric tailgate button malfunctions, it sends incorrect signals to the control module. The solution is to open the tailgate for inspection and repair the button if necessary. Remote key button/chip failure: If the tailgate does not open automatically when the key is placed outside the vehicle's sensing range, it usually indicates a problem with the remote key button or chip. The solution is to replace the components in the remote key and perform a computer re-matching service. Activation of anti-pinch function when closing the tailgate: If the tailgate automatically opens during closing, it is usually due to foreign objects or insufficient lubrication causing increased resistance, which triggers the anti-pinch function. The solution is to apply lubricant. Lock mechanism failure: If the tailgate automatically opens without being properly locked, it generally indicates a lock mechanism failure. The solution is to replace the lock mechanism.

1

3

Share

Can You Control Speed by Braking in Subject Two?

Can a Flooded Car After Heavy Rain Still Be Driven?

Can High Beam Lights Improve Visibility?

Why do the taillights remain on after the engine is turned off?

Can water be drained from a rear taillight that has water ingress?

What does the H on a car tire mean?

What are the causes of Mercedes-Benz electric tailgate failure?

Does a Steering Wheel Cover Affect Safety?

How to Make a U-Turn with a Manual Transmission?

Is Rolls-Royce a Four-Wheel Drive Vehicle?

How to distinguish between Corolla and Corolla EX?