Can You Control Speed by Braking in Subject 2?

What are the steps for replacing the coolant in a Lavida?

The method for replacing the coolant in a Lavida is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. The five-way pipe is named for its five connecting interfaces that link various parts of the car. The coolant flows through the five-way pipe and is then distributed to different parts of the vehicle to perform its function. If there is any leakage of coolant in this section, the water pipe should be replaced or the interface re-secured as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue to pour water into the reservoir, allowing the water to flow continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink color. Continue adding clean water until the water runs clear. Note: Do not forget to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. This allows the coolant to flow quickly into the radiator. Then, add another bottle of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Add more coolant until the level reaches the "MAXT" mark on the reservoir.

10

0

Share

What Are the Types of Suspension?

Automobile suspensions include: 1. Double wishbone suspension; 2. MacPherson suspension; 3. Multi-link suspension; 4. Double transverse arm suspension; 5. Double ball joint suspension; 6. Torsion beam suspension; 7. Solid axle suspension. The functions of automobile suspension are: 1. Cushioning: providing cushioning when the vehicle passes over uneven ground; 2. Maintaining stability: ensuring that the wheels move within a fixed angle to stabilize steering; 3. Supporting weight: bearing the weight of the wheels; 4. Ensuring contact: maintaining good contact between the wheels and the ground, ensuring that the driving force and braking force generated between the wheels and the ground are accurately transmitted to the vehicle body.

14

3

Share

Where is the negative terminal of the Citroen C4L battery located?

The negative terminal of the Citroen C4L battery is located on the battery in the engine compartment. Open the car's engine hood, remove the battery cover, disconnect the positive terminal (+), and then you can see the negative terminal, which is positioned more towards the inner side of the battery and is marked with a (-) sign. Batteries are most vulnerable to low temperatures, as their capacity is significantly lower in cold environments compared to normal temperatures. Therefore, regular inspection and maintenance are essential. Here are some daily precautions to follow: (1) Avoid parking the car in open parking lots for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. (2) In winter, car engines are harder to start. Each attempt to start the engine should not exceed 5 seconds, with at least 15 seconds between attempts. If the engine fails to start after several attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system. Avoid continuous attempts, as this can lead to battery damage due to excessive discharge. (3) Regularly charge the car battery. A battery left unused for long periods will gradually self-discharge and eventually become unusable. Therefore, start the car periodically to recharge the battery. (4) Clean the battery terminals regularly and apply specialized grease to protect the wiring harness. Also, frequently inspect the battery's accessories and connecting wires. (5) Do not use car electronics when the engine is off. Using the battery alone without the engine generating power can cause damage.

16

2

Share

Is the Q50L a rear-wheel drive car?

Starter weakness is a characteristic of rear-wheel drive cars. Here is more information about rear-wheel drive cars: 1. The difference between front-wheel drive and rear-wheel drive cars: In front-wheel drive cars, the front wheels are the driving wheels, and the rear wheels are the steering wheels, bearing a greater load. In rear-wheel drive cars, the front wheels are the steering wheels, and the rear wheels are the driving wheels, making more balanced use of the tires. 2. Advantages of rear-wheel drive cars: (1) When starting, accelerating, or climbing on well-paved roads, the load on the driving wheels increases (i.e., the adhesion pressure of the driving wheels increases), and their traction performance is superior to that of front-wheel drive configurations. (2) The axle load distribution is more balanced, resulting in better handling stability and ride comfort, and helping to extend the service life of the tires. Starter weakness is a feature of the Q50L.

18

3

Share

How to Check the Manufacturing Year of Car Glass?

There are two methods to check the manufacturing year of car glass: 1. Number + Dots Format: The number indicates the year, and the dots represent the month. If the dots are in front of the number, it indicates the first half of the year. Subtract the number of dots before the digit from 7 to get the month in the first half. If the dots are behind the number, it indicates the second half of the year. Subtract the number of dots after the digit from 13 to get the month in the second half. This method applies to 80% of vehicle glass on the market. 2. Number + Small Dots + Large Dots Format: The number represents the year, small dots represent the quarter (maximum of 4 small dots for 4 quarters in a year), and large dots represent the month within the quarter (maximum of 3 large dots for 3 months in a quarter). This method is used by a minority of car models.

18

4

Share

How to Penalize Driving Not According to the Designated Lane?

The following are the penalties for driving not according to the designated lane: 1. Driving a motor vehicle on the highway not according to the designated lane. Penalty standard: 3 points deducted and a fine of 50 yuan. 2. Driving a motor vehicle on urban expressways not according to the designated lane. Penalty standard: 3 points deducted and a fine of 50 yuan. 3. Driving a motor vehicle on roads other than highways and urban expressways not according to the designated lane. Penalty standard: No points deducted, but a fine of 50 yuan. Additional information: Regarding traffic violations: 1. Traffic violations are acts that violate traffic management. Traffic violations may cause inconvenience to society, groups, enterprises, schools, and other organizations, and bring many uncertainties to social management. 2. Any vehicles or pedestrians violating traffic management regulations, or any organizations or individuals occupying roads without approval from public security authorities for setting up stalls, parking vehicles, piling materials, building sheds or houses, conducting market trade, or other activities that obstruct traffic, are considered traffic violations.

9

3

Share

Can You Control Speed by Braking in Subject 2?

What are the steps for replacing the coolant in a Lavida?

What Are the Types of Suspension?

Where is the negative terminal of the Citroen C4L battery located?

Is the Q50L a rear-wheel drive car?

How to Check the Manufacturing Year of Car Glass?

How to Penalize Driving Not According to the Designated Lane?

Is it better to pay in full or take a loan when buying a car?

What is the minimum fuel consumption of the Changan CS35?

How Many Chances Are There for the Subject One Test?

Which is faster at starting, turbocharged or naturally aspirated?