Can You Continue Driving with a Stone Stuck in the Brake Disc?

2 Answers
DeCollin
07/24/25 3:07am
You should not continue driving with a stone stuck in the brake disc. Here are the reasons why: 1. Continuing to drive with a stone stuck in the brake disc can cause the stone to scratch and damage the brake disc. 2. It can lead to various abnormal noises when braking. 3. It may damage the car's brake caliper and master cylinder. Below is additional information on how to replace brake pads: 1. Lift the car and remove the tire. 2. Unscrew the fixing bolts on the brake caliper and remove the caliper. 3. Remove the old brake pads and push back the caliper piston. 4. Clean the brake disc mounting bracket and install the new brake pads.
Was this review help?
13
1
Share
VanDakota
08/10/25 10:40pm
I've been driving for many years and have encountered this issue several times. You absolutely cannot continue driving with a stone stuck in the brake disc, as the stone will continuously scrape against the disc, causing severe grooves and wear. Last time on the highway, I suddenly heard a screeching noise, immediately slowed down, and pulled over to find a small stone lodged between the brake discs. I stubbornly drove for a few more minutes, and the braking efficiency noticeably dropped, almost causing an accident. My advice is to stop and check immediately: find a safe spot, turn off the engine, and try gently reversing a few times to use inertia to shake the stone loose. If that doesn’t work, use a flashlight and small tweezers to remove it, but be careful not to damage the disc surface. If the stone is tightly lodged or you’re unsure, call a tow truck to take it to a repair shop. Preventive measures include avoiding roads with lots of stones and regularly cleaning the wheels to reduce debris buildup. In short, safe driving is key—ignoring small problems can lead to major disasters.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of a smart car?

The fuel tank capacity of a smart car is 35 liters. Generally, owners opt for the 1.0T three-cylinder smart model, which has an average fuel consumption of 4.5 to 5.5 liters per 100 kilometers. Here is more information about this car: 1. The dimensions of the smart car are 2695mm in length, 1663mm in width, and 1555mm in height, with a wheelbase of 1873mm. 2. The smart car is a microcar jointly manufactured by German Mercedes-Benz and Swiss SWATCH watch company, currently under the Daimler Group. The 'S' stands for Swatch, 'M' for Mercedes, and 'art' represents art. 3. The front design of the smart car adopts a family-style design language, featuring an inverted trapezoidal grille with a dense honeycomb pattern inside. The headlight assemblies on both sides incorporate a new design style, and circular fog lights are positioned below the front bumper.
12
5
Share

Where is the cigarette lighter fuse located in the Chevrolet Malibu XL?

The cigarette lighter fuse in the Chevrolet Malibu XL is located inside the leftmost cover panel of the vehicle's center console, integrated with other fuses. If you need to replace the cigarette lighter fuse, first open the cover panel, then remove the blown fuse, and install a new fuse of the same specification and model. Below is more information about fuses: 1. The main function of a fuse is to ensure the safe use of the battery. The battery is connected to electrical appliances through wires and fuses. If there is a fault in the internal circuit of an electrical appliance and there is no fuse, it may damage the battery. 2. With a fuse in place, if a short circuit occurs, the fuse will melt first, actively disconnecting the electrical appliance from the battery, thus ensuring the battery's safety. 3. If the owner finds that the fuse has melted, they should first check for faults in the electrical appliance before replacing the fuse. When replacing, always use a fuse of the same specification and model, and never substitute it with other metal wires.
13
2
Share

How to enable automatic locking for Hyundai Elantra?

Hyundai Elantra does not come with an automatic locking feature by default, but it can be retrofitted. Below is an analysis of the pros and cons of automatic locking: 1. Advantages: It provides protection for passengers with children in the car, preventing young children from opening the door handles while the vehicle is in motion. 2. Disadvantages: (1) It may foster laziness in drivers and reduce their vigilance. (2) It can hinder escape. The central locking system is a combination of mechanical and electronic devices. In the event of an accident where electronic devices fail, passengers can still open the door locks to escape. However, if all occupants inside the car are unconscious, rescuers outside may waste more time trying to open the doors.
14
0
Share

Which country does Dongfeng Yueda Kia belong to?

Dongfeng Yueda Kia is a joint venture brand between China and South Korea. The models under Dongfeng Yueda Kia include: K4, K5 K5, Forte, Kia K3, Sportage, etc. Here is an introduction to the new cars of Dongfeng Yueda Kia: 1. Taking the 2019 Dongfeng Yueda Kia K4 as an example, it belongs to the mid-size car category, with body dimensions of: length 4720mm, width 1815mm, height 1465mm, wheelbase of 2770mm, fuel tank capacity of 62l, and curb weight of 1380kg. 2. The 2019 Dongfeng Yueda Kia K4 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum horsepower of 143PS, maximum power of 105kW, maximum torque of 17Nm, and is paired with a 6-speed automatic transmission.
20
2
Share

Does the Buick GL6 have a four-cylinder engine?

Buick GL6 does not have a four-cylinder engine. Here is more information about this vehicle: 1. The Buick GL6 is an MPV model under the Buick brand, and it is equipped with a three-cylinder engine across all variants. The dimensions of the Buick GL6 are 4692 mm in length, 1794 mm in width, and 1626 mm in height, with a wheelbase of 2796 mm. 2. The Buick GL6 is powered by a 1.3-liter turbocharged three-cylinder engine, delivering a maximum power of 120 kW and a maximum torque of 230 Nm. This engine features multi-point fuel injection technology and is constructed with an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission. 3. The front suspension of the Buick GL6 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
15
5
Share

Where is the fuel tank switch located on the Qoros 5?

The Qoros 5 does not have a separate fuel tank switch. When the central locking system is unlocked, simply press the fuel tank cover to open it. Below is more information about the car's fuel tank: 1. The fuel tank is a container used in vehicles such as cars or airplanes to store fuel, and it is a specialized container in the hydraulic system for storing hydraulic oil. 2. In addition to storing gasoline, the fuel tank can also dissipate heat and separate air bubbles from the oil. It can be divided into two types: open fuel tanks and closed fuel tanks. Extended content: The Qoros 5 is a compact SUV with dimensions of 4600mm in length, 1869mm in width, and 1676mm in height, and a wheelbase of 2710mm. This model is equipped with a 1.6-liter turbocharged engine across the entire lineup, delivering a maximum power of 115kw and a maximum torque of 210nm.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.